개소리 왈왈/자전거2020. 5. 18. 22:09

코로나 때문에 가능할지 모르겠지만

막상 없다고 하면 좀 아쉬울 느낌

 

URL이 달라진듯?

[링크 : http://www.seoulbikefest.com/]

'개소리 왈왈 > 자전거' 카테고리의 다른 글

자전거 수리비도 끄응..  (0) 2020.08.12
라이트 수리  (0) 2020.07.07
오랫만에 자전거  (0) 2020.05.06
자전거 대행진  (0) 2019.06.09
점심의 자전거.. -_ㅠ  (2) 2019.05.28
Posted by 구차니
Programming/golang2020. 5. 18. 21:53

go 에서 검색하기 힘드니 이제 golang이라고도 하는 듯

윈도우용  바이너리도 제공은 하는데 native 일려나?

 

[링크 : https://golang.org/dl/]

 

 

흐음.. 키워드만 봐서는 java, python이 떠오르네

[링크 : https://github.com/golang/go/wiki/Ubuntu]

'Programming > golang' 카테고리의 다른 글

golang gore(repl), delve  (0) 2022.03.31
go build 옵션  (0) 2022.03.31
go lang static http server  (0) 2022.03.10
go hello world build static / shared  (0) 2022.02.17
go lang rest  (0) 2022.02.11
Posted by 구차니

좀 돌아다닐일이 있었는데 올림픽 대로 잠길듯한 폭우...

오랫만에 이렇게 운전하고 돌아 다니니 무지 피곤하네

'개소리 왈왈 > 육아관련 주저리' 카테고리의 다른 글

아내님의 머스트 해브 아이템  (0) 2020.05.26
아 심심하다  (0) 2020.05.20
간만에 외출 예정!  (0) 2020.05.17
정부 긴급재난지원금 신청  (2) 2020.05.12
자작 공기청정기 하나 고장남  (0) 2020.05.11
Posted by 구차니

아아 화요일은 실업인정 해야 하는구나

돈 주니 좋은데 귀찮다 귀찮다 ㅠㅠ

'개소리 왈왈 > 육아관련 주저리' 카테고리의 다른 글

아 심심하다  (0) 2020.05.20
비가 억수같이 내리네  (0) 2020.05.18
정부 긴급재난지원금 신청  (2) 2020.05.12
자작 공기청정기 하나 고장남  (0) 2020.05.11
침대 하나 버리기로 결정  (2) 2020.05.10
Posted by 구차니

동일 제품인것 같은데 6V 700mAh 배터리라는데 크기를 봐서는

1.2V * 5 으로 보이는데

1.5V * 4 로 구성을 해보니 모터 드라이버가 문제인지 모르겠지만

모터 두개를 동시 구동하면 속도가 느려지는게 눈에 띌정도로 보인다.

 

1 * Battery Charger, 1 * 6.0V 700mAh Battery

[링크 : https://www.flipkart.com/...-2-4ghz-ironhide-killer-scale-1-16/p/itmer22ygezamy3m]

'개소리 왈왈 > 쿼드콥터(RC)' 카테고리의 다른 글

RC카 분해 2  (2) 2020.07.24
오늘의 지름 - 메카넘 휠 RC카  (0) 2020.07.23
L298N + RC 카 개조중  (0) 2020.04.29
예전에 산 계륵. 심심해서 (다시)분해!  (0) 2020.04.24
드론 대파  (2) 2020.04.24
Posted by 구차니

너무 크기도 했고 여름이라 냄새가 심하게 나기 시작해서 방생하기로 결정!

(실은 병아리 먹이로 주자니 차라리 보이지 않는데서 새한테 잡혀먹는게 나을거라고 보내기로 ㅠㅠ)

 

 

'개소리 왈왈 > 사진과 수다' 카테고리의 다른 글

하루 늦은 여름(?) 별  (0) 2020.05.21
sd 카드는 부서지는 거구나 ㅠㅠ  (0) 2020.05.19
무지개  (0) 2020.05.11
병아리 목욕  (0) 2020.05.08
병아리 2마리 획득  (0) 2020.04.29
Posted by 구차니
embeded/raspberry pi2020. 5. 16. 10:00

ht_capab 에서 HT40으로 되어있어서 에러가 나던데

일단은 conf 파일 예제에 있던 대로 HT40- 으로 하니 문제없이 작동하긴 한다.

ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]

[링크 : https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf]

 

로그를 분석해보니 HT40이 문제가 아니었군

 5월 16 09:46:44 raspberrypi kernel: WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 0
 5월 16 09:46:45 raspberrypi kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
 5월 16 09:46:45 raspberrypi hostapd[1455]: Driver does not support configured HT capability [DSSS_CCK-40]
 5월 16 09:46:45 raspberrypi hostapd[1455]: wlan0: interface state UNINITIALIZED->DISABLED
 5월 16 09:46:45 raspberrypi hostapd[1455]: wlan0: AP-DISABLED
 5월 16 09:46:45 raspberrypi hostapd[1455]: wlan0: Unable to setup interface.
 5월 16 09:46:45 raspberrypi hostapd[1455]: wlan0: interface state DISABLED->DISABLED
 5월 16 09:46:45 raspberrypi hostapd[1455]: wlan0: AP-DISABLED
 5월 16 09:46:45 raspberrypi hostapd[1455]: wlan0: CTRL-EVENT-TERMINATING
 5월 16 09:46:45 raspberrypi hostapd[1455]: hostapd_free_hapd_data: Interface wlan0 wasn't started
 5월 16 09:46:45 raspberrypi hostapd[1455]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
 5월 16 09:46:45 raspberrypi kernel: WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 7
 5월 16 09:46:45 raspberrypi systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE

 

iwlist 명령을 통해서 capability를 볼 수 있는 듯

$ iw list
Wiphy phy0
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short long limit: 2
        Coverage class: 0 (up to 0m)
        Device supports RSN-IBSS.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP-128 (00-0f-ac:4)
                * CCMP-256 (00-0f-ac:10)
                * GCMP-128 (00-0f-ac:8)
                * GCMP-256 (00-0f-ac:9)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
        Band 1:
                Capabilities: 0x17e
                        HT20/HT40
                        SM Power Save disabled
                        RX Greenfield
                        RX HT20 SGI
                        RX HT40 SGI
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        No DSSS/CCK HT40
                Maximum RX AMPDU length 32767 bytes (exponent: 0x002)
                Minimum RX AMPDU time spacing: 2 usec (0x04)
                HT TX/RX MCS rate indexes supported: 0-7, 32
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps (short preamble supported)
                        * 5.5 Mbps (short preamble supported)
                        * 11.0 Mbps (short preamble supported)
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm) (no IR)
                        * 2472 MHz [13] (20.0 dBm) (no IR)
                        * 2484 MHz [14] (20.0 dBm) (no IR)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * new_station
                 * new_mpath
                 * set_mesh_config
                 * set_bss
                 * authenticate
                 * associate
                 * deauthenticate
                 * disassociate
                 * join_ibss
                 * join_mesh
                 * set_tx_bitrate_mask
                 * frame
                 * frame_wait_cancel
                 * set_wiphy_netns
                 * set_channel
                 * set_wds_peer
                 * probe_client
                 * set_noack_map
                 * register_beacons
                 * start_p2p_device
                 * set_mcast_rate
                 * connect
                 * disconnect
                 * set_qos_map
                 * set_multicast_to_unicast
        Supported TX frame types:
                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * IBSS: 0x40 0xb0 0xc0 0xd0
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * mesh point: 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-device: 0x40 0xd0
        software interface modes (can always be added):
                 * AP/VLAN
                 * monitor
        valid interface combinations:
                 * #{ AP, mesh point } <= 8,
                   total <= 8, #channels <= 1
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Device supports TX status socket option.
        Device supports HT-IBSS.
        Device supports SAE with AUTHENTICATE command
        Device supports low priority scan.
        Device supports scan flush.
        Device supports AP scan.
        Device supports per-vif TX power setting
        Driver supports full state transitions for AP/GO clients
        Driver supports a userspace MPM
        Device supports configuring vdev MAC-addr on create.
        Supported extended features:
                * [ RRM ]: RRM
                * [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
                * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
                * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211

[링크 : https://unix.stackexchange.com/questions/405282/finding-capabilities-of-wifi-driver-device]

'embeded > raspberry pi' 카테고리의 다른 글

라즈베리 RC는 일단 구동에는 실패  (0) 2020.06.10
rpi / android h264 streaming  (0) 2020.05.24
hostapd 통신이 안되네? -> 되네!  (0) 2020.05.15
RC카 node.js was 제작 1차 완료  (0) 2020.05.14
node.js raspi-pwm  (0) 2020.05.14
Posted by 구차니
embeded/raspberry pi2020. 5. 15. 16:24

DHCP로 주소도 받아와서 핸드폰에서는 문제없이 되는줄 알았는데

노트북에서 해보니 ssh는 permission denied가 뜨고, nginx로 띄워둔 홈페이지는 접근이 되지 않는다.

 

도대체 핸드폰에서는 어떻게 되었던 거지?

 

+ 2020.05.16

다시 정신 차리고 해보니 자기 자신 아이피를 넣고 있으니 안되지 -_-

문제없이 잘된다.

+

 

그리고 hw_mode=g로 설정을 해놔서 802.11n을 지원하는 녀석임에도 불구하고 54Mbps로만 잡힌다.

둘다 테스트를 추가로 해봐야 할 듯..

# ieee80211n: Whether IEEE 802.11n (HT) is enabled
# 0 = disabled (default)
# 1 = enabled
# Note: You will also need to enable WMM for full HT functionality.
# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
#ieee80211n=1

# ht_capab: HT capabilities (list of flags)
# LDPC coding capability: [LDPC] = supported
# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
# with secondary channel above the primary channel
# (20 MHz only if neither is set)
# Note: There are limits on which channels can be used with HT40- and
# HT40+. Following table shows the channels that may be available for
# HT40- and HT40+ use per IEEE 802.11n Annex J:
# freq HT40- HT40+
# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan)
# 5 GHz 40,48,56,64 36,44,52,60
# (depending on the location, not all of these channels may be available
# for use)
# Please note that 40 MHz channels may switch their primary and secondary
# channels if needed or creation of 40 MHz channel maybe rejected based
# on overlapping BSSes. These changes are done automatically when hostapd
# is setting up the 40 MHz channel.
# HT-greenfield: [GF] (disabled if not set)
# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
# Tx STBC: [TX-STBC] (disabled if not set)
# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
# disabled if none of these set
# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
# set)
# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
#ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]

[링크 : https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf]

[링크 : https://airpage.org/xe/project_data/24937]

'embeded > raspberry pi' 카테고리의 다른 글

rpi / android h264 streaming  (0) 2020.05.24
hostapd 802.11n 설정하기 시도중  (0) 2020.05.16
RC카 node.js was 제작 1차 완료  (0) 2020.05.14
node.js raspi-pwm  (0) 2020.05.14
node.js onoff  (0) 2020.05.13
Posted by 구차니

21일 까지 받을수 있는 듯

 

가입하고 클릭클릭

 

카테고리 이름을 바꾸어야 하나...

 

[링크 : https://www.epicgames.com/store/ko/product/grand-theft-auto-v/home]

'게임 > 오리진&스팀&유플레이' 카테고리의 다른 글

epic games 보더랜드 핸섬 컬렉션 무료!  (0) 2020.06.01
epic games - 문명 6  (0) 2020.05.22
ubisoft 어새신 크리드 2 무료  (0) 2020.04.17
스펙 옵스 한글 패치  (0) 2020.02.24
스팀 - crusader kings 2  (2) 2019.08.03
Posted by 구차니
embeded/raspberry pi2020. 5. 14. 19:18

일단은 대충 예전 기억 되살려서 대충대충 만들었음

 

 

 

무선랜 카드가 하나뿐인걸 라즈베리에 해놔서 PC에서 테스트할 방법이 현재는 없어서

다이소에서 하나 사던가 해야 할 듯 -_ㅠ

 

ip:3000/api/f

ip:3000/api/r

ip:3000/api/s

 

ip:3000/api/wl

ip:3000/api/ws

ip:3000/api/wr

 

으로 명령을 주도록 했고 PWM은 100%로 설정함

코드 복사하기에는 여러개라 귀찮으니 github를 이용하는 걸로 결정

 

이제.. 안드로이드 앱 만들면 되는건가...

 

[링크 : https://github.com/minimonk82/rpi_nodejs_rc/]

'embeded > raspberry pi' 카테고리의 다른 글

hostapd 802.11n 설정하기 시도중  (0) 2020.05.16
hostapd 통신이 안되네? -> 되네!  (0) 2020.05.15
node.js raspi-pwm  (0) 2020.05.14
node.js onoff  (0) 2020.05.13
라즈베리 파이 무선공유기 만들기(비밀번호 없이)  (0) 2020.05.13
Posted by 구차니