실은 odroid에 한거임 ㅋㅋㅋ
$ sudo apt-get install openvpn |
인 줄 알았는데 굳이 이거 아니어도 되는건가?
아래는 좀 다시 내용을 봐야 할 듯..
$ sudo apt-get install pptp-linux |
[링크 : https://prosindo.com/blog/2015/08/24/vpn-pptp-client-on-raspberry-pi/]
+
2018.05.14
라즈베리에서 설치해보니 위에 패키지를 깔면 된다.
$ sudo apt-get install pptp-linux Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: ppp The following NEW packages will be installed: ppp pptp-linux 0 upgraded, 2 newly installed, 0 to remove and 10 not upgraded. Need to get 358 kB of archives. After this operation, 859 kB of additional disk space will be used. Do you want to continue? [Y/n] |
+
$ sudo pptpsetup --create MYCONNECTION --server vpn.ourcompany.com --domain DOMAINNAME --username myname --password ******* --encrypt --start |
[링크 : https://www.raspberrypi.org/forums/viewtopic.php?t=123022]
+
주소와 계정은 임의로 변조함
$ sudo pptpsetup --create TUNN --server vpntest.minimonk.net --username pi --password raspberrypi --encrypt --start Using interface ppp0 Connect: ppp0 <--> /dev/pts/9 CHAP authentication succeeded MPPE 128-bit stateless compression enabled local IP address 192.168.219.205 remote IP address 192.168.219.1 |
원격으로 접속해서 크롬으로 접속하다 보니 영어로 나옴.. -_-a
아무튼 VPN 상태에서 Connected로 뜸!!
전혀 다른 아이피와 전혀 다른 NIC으로 접속이 됨
$ ifconfig eth0 Link encap:Ethernet HWaddr 3a:02:dd:--:--:-- inet addr:192.168.10.83 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::3802:ddff:fe--:----/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27646 errors:0 dropped:0 overruns:0 frame:0 TX packets:12819 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:35345850 (35.3 MB) TX bytes:1348771 (1.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:228 errors:0 dropped:0 overruns:0 frame:0 TX packets:228 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:23139 (23.1 KB) TX bytes:23139 (23.1 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.219.205 P-t-P:192.168.219.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1496 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:70 (70.0 B) TX bytes:76 (76.0 B) |
$ ping 192.168.219.1 PING 192.168.219.1 (192.168.219.1) 56(84) bytes of data. 64 bytes from 192.168.219.1: icmp_seq=1 ttl=64 time=6.53 ms 64 bytes from 192.168.219.1: icmp_seq=2 ttl=64 time=7.12 ms 64 bytes from 192.168.219.1: icmp_seq=3 ttl=64 time=6.41 ms ^C --- 192.168.219.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms rtt min/avg/max/mdev = 6.417/6.693/7.129/0.325 ms $ ping 192.168.10.1 PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data. 64 bytes from 192.168.10.1: icmp_seq=1 ttl=64 time=0.774 ms 64 bytes from 192.168.10.1: icmp_seq=2 ttl=64 time=0.892 ms ^C --- 192.168.10.1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 999ms rtt min/avg/max/mdev = 0.774/0.833/0.892/0.059 ms |
그런데.. 80번 포트 포워딩 해서 접속해보려고 하는데 이건 안되네..
+
$ pptpsetup --help pptpsetup --create <TUNNEL> --server <SERVER> [--domain <DOMAIN>] --username <USERNAME> [--password <PASSWORD>] [--encrypt] [--start] pptpsetup --delete <TUNNEL> Options: * the name you wish to use to refer to the tunnel (you choose it), * the IP address or host name of the server, * the authentication domain name (optional), * the username you are to use, * the password you are to use, * whether encryption is required, * whether to start the connection after configuration. pptpsetup - Point-to-Point Tunneling Protocol setup Copyright (C) 2006 Nelson Ferraz pptpsetup comes with ABSOLUTELY NO WARRANTY; for details see source. This is free software, and you are welcome to redistribute it under certain conditions; see source for details. |
+
2018.05.14
터널 설정은 위에서 한 대로 pptpsetup을 이용하면되고
접속은
$ sudo pon TUNN |
+
접속 끊기는
$ sudo poff TUNN |
[링크 : https://wiki.archlinux.org/index.php/PPTP_Client]
이상하게 접속이 안되는 경우가 있는데, 일단은 SD 메모리 불량으로 EXT 파일 경고가 뜨는거 봐서는
시스템이 엉겨서 그런 듯..
$ sudo pptpsetup --create TUNN ... Using interface ppp0 Connect: ppp0 <--> /dev/pts/9 Modem hangup Connection terminated. |
Ubuntu 14.04 에서는 커널 모듈 문제로 발생하는 경우도 있는 듯
[링크 : https://askubuntu.com/questions/269399/failed-to-connect-to-pptp-vpn-server-on-ubuntu]
+
접속 로그 보는 방법
# pon <TUNNEL> debug dump logfd 2 nodetach |
[링크 : https://wiki.archlinux.org/index.php/PPTP_Client]
해보니까.. debug랑 nodetach만 해도 된다.
'프로그램 사용 > VPN(PPTP)' 카테고리의 다른 글
| VPN / 웹서버 설정 (0) | 2018.05.14 |
|---|---|
| iptime vpn 제약? (0) | 2018.05.12 |
