부업을 해야하나....
돈 나올 구멍을 파는 수 밖에 없는 건가...
후....
'개소리 왈왈 > 직딩의 비애' 카테고리의 다른 글
몸이 낫질 않네... (0) | 2015.10.31 |
---|---|
시간 빠르다.. (0) | 2015.10.10 |
8월 끝 (0) | 2015.08.31 |
애본다 바빠 ㅠㅠ (0) | 2015.08.22 |
경복궁 / 창덕궁 야간개장 예매 준비! (0) | 2015.08.05 |
부업을 해야하나....
돈 나올 구멍을 파는 수 밖에 없는 건가...
후....
몸이 낫질 않네... (0) | 2015.10.31 |
---|---|
시간 빠르다.. (0) | 2015.10.10 |
8월 끝 (0) | 2015.08.31 |
애본다 바빠 ㅠㅠ (0) | 2015.08.22 |
경복궁 / 창덕궁 야간개장 예매 준비! (0) | 2015.08.05 |
확실히. SIMD쪽이 DSP 보다는 명령어가 먼가.. 파워풀 해보이는 기분?
ARM9 dsp
[링크 : http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dvi0022a/ar01s02s14.html]
ARM11 simd
[링크 : http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0301h/Caccebch.html]
Parallel add /subtract
Sign/zero extend and add
Signed multiply and multiply, accumulate
Saturate, select, and pack
[링크 : http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0491i/CJADHCJE.html]
jtag과 swd (0) | 2015.12.14 |
---|---|
비글본 github 저장소 (0) | 2015.10.30 |
arm11 simd instruction (0) | 2015.10.01 |
cortex-A5/A7 (0) | 2015.09.21 |
cortex-m 시리즈와 포화연산 (0) | 2015.08.26 |
그나저나..ARM11의 SIMD 명령어 셋 목록 구하기 어렵네..
무슨 차이가 있나 보려고 했더니..
ARMv6 SIMD Features:
75% performance increase for audio and video processing
Simultaneous computation of 2x16-bit or 4x8-bit operands
Fractional arithmetic
User definable saturation modes (arbitrary word-width)
Dual 16x16 multiply-add/subtract 32x32 fractional MAC
Simultaneous 8/16-bit select operations
Performance up to 3.2 GOPS at 800MHz
Performance is achieved with a "near zero" increase in power consumption on a typical implementation
[링크 : http://www.arm.com/products/processors/technologies/dsp-simd.php]
[링크 : http://elinux.org/images/4/40/Elc2011_anderson_arm.pdf]
[링크 : https://web.eecs.umich.edu/~prabal/teaching/eecs373-f10/readings/ARM_Architecture_Overview.pdf]
오예 찾았다
__qadd16 intrinsic
__qadd8 intrinsic
__qasx intrinsic
__qsax intrinsic
__qsub16 intrinsic
__qsub8 intrinsic
__sadd16 intrinsic
__sadd8 intrinsic
__sasx intrinsic
__sel intrinsic
__shadd16 intrinsic
__shadd8 intrinsic
__shasx intrinsic
__shsax intrinsic
__shsub16 intrinsic
__shsub8 intrinsic
__smlad intrinsic
__smladx intrinsic
__smlald intrinsic
__smlaldx intrinsic
__smlsd intrinsic
__smlsdx intrinsic
__smlsld intrinsic
__smlsldx intrinsic
__smuad intrinsic
__smuadx intrinsic
__smusd intrinsic
__smusdx intrinsic
__ssat16 intrinsic
__ssax intrinsic
__ssub16 intrinsic
__ssub8 intrinsic
__sxtab16 intrinsic
__sxtb16 intrinsic
__uadd16 intrinsic
__uadd8 intrinsic
__uasx intrinsic
__uhadd16 intrinsic
__uhadd8 intrinsic
__uhasx intrinsic
__uhsax intrinsic
__uhsub16 intrinsic
__uhsub8 intrinsic
__uqadd16 intrinsic
__uqadd8 intrinsic
__uqasx intrinsic
__uqsax intrinsic
__uqsub16 intrinsic
__uqsub8 intrinsic
__usad8 intrinsic
__usada8 intrinsic
__usax intrinsic
__usat16 intrinsic
__usub16 intrinsic
__usub8 intrinsic
__uxtab16 intrinsic
__uxtb16 intrinsic.
[링크 : http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0491i/CJADHCJE.html]
비글본 github 저장소 (0) | 2015.10.30 |
---|---|
arm9 dsp / arm11 simd instuction 비교? (0) | 2015.10.01 |
cortex-A5/A7 (0) | 2015.09.21 |
cortex-m 시리즈와 포화연산 (0) | 2015.08.26 |
ARM926EJ / ARMv5TE (0) | 2015.07.28 |
... 카카오가 되더니 폐쇄 안하는게 없네
물론 기상 검색 페이지에서 뜨니까 어느정도 대체제로 쓸수는 있겠지만
에효~
[링크 : http://weather.media.daum.net/]
[링크 : http://search.daum.net/search?w=tot&q=날씨]
딥마인드 - 알파고에 대한 생각 (0) | 2016.03.09 |
---|---|
다음 클라우드 종료까지!!!!! 한달 미만! (0) | 2015.12.09 |
감자도스의 스멜이 ㅋ (0) | 2015.03.29 |
출산 그리고 이사완료 (0) | 2015.03.06 |
인권 동물권? (0) | 2015.01.17 |
웹을 통해서 GPIO 제어하는 웹 어플
확장 보드를 통해 pwm 제어용 칩을 달면 device를 통해 찾아서 제어가 가능하지만..
gpio는 in/out만 설정이 가능하고 on/off만 되는 듯 제약이 크다
보기에는 좋으나.. 그리 쓸만하진 않은 기분?
(wiringpi를 써서 그런걸지도..)
[링크 : http://todayhumor.com/?programmer_13608]
[링크 : http://www.rasplay.org/?p=5061]
[링크 : http://webiopi.trouch.com/]
다만.. rpi 2b에서는 안될거 같기도 하고..
[링크 : https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98981]
+
0.7.1 rpi2용 패치 적용 버전
+
으으 설치 겁나 길다
$ sudo ./setup.sh Installing WebIOPi... Updating apt package list... 기존 http://raspberrypi.collabora.com wheezy Release.gpg 받기:1 http://archive.raspberrypi.org wheezy Release.gpg [473 B] 받기:2 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B] 기존 http://raspberrypi.collabora.com wheezy Release 받기:3 http://mirrordirector.raspbian.org wheezy Release [14.4 kB] 받기:4 http://archive.raspberrypi.org wheezy Release [17.6 kB] 기존 http://raspberrypi.collabora.com wheezy/rpi armhf Packages 받기:5 http://archive.raspberrypi.org wheezy/main armhf Packages [135 kB] 받기:6 http://mirrordirector.raspbian.org wheezy/main armhf Packages [6,908 kB] 무시http://raspberrypi.collabora.com wheezy/rpi Translation-ko_KR 무시http://raspberrypi.collabora.com wheezy/rpi Translation-ko 무시http://raspberrypi.collabora.com wheezy/rpi Translation-en 무시http://archive.raspberrypi.org wheezy/main Translation-ko_KR 무시http://archive.raspberrypi.org wheezy/main Translation-ko 무시http://archive.raspberrypi.org wheezy/main Translation-en 받기:7 http://mirrordirector.raspbian.org wheezy/contrib armhf Packages [23.6 kB] 받기:8 http://mirrordirector.raspbian.org wheezy/non-free armhf Packages [49.3 kB] 받기:9 http://mirrordirector.raspbian.org wheezy/rpi armhf Packages [592 B] 무시http://mirrordirector.raspbian.org wheezy/contrib Translation-ko_KR 무시http://mirrordirector.raspbian.org wheezy/contrib Translation-ko 무시http://mirrordirector.raspbian.org wheezy/contrib Translation-en 무시http://mirrordirector.raspbian.org wheezy/main Translation-ko_KR 무시http://mirrordirector.raspbian.org wheezy/main Translation-ko 무시http://mirrordirector.raspbian.org wheezy/main Translation-en 무시http://mirrordirector.raspbian.org wheezy/non-free Translation-ko_KR 무시http://mirrordirector.raspbian.org wheezy/non-free Translation-ko 무시http://mirrordirector.raspbian.org wheezy/non-free Translation-en 무시http://mirrordirector.raspbian.org wheezy/rpi Translation-ko_KR 무시http://mirrordirector.raspbian.org wheezy/rpi Translation-ko 무시http://mirrordirector.raspbian.org wheezy/rpi Translation-en 내려받기 7,149 k바이트, 소요시간 28초 (249 k바이트/초) 패키지 목록을 읽는 중입니다... 완료 Found Python 2.7.3... Trying to install python-dev using apt-get 패키지 목록을 읽는 중입니다... 완료 의존성 트리를 만드는 중입니다 상태 정보를 읽는 중입니다... 완료 다음 패키지를 더 설치할 것입니다: libssl-dev libssl-doc python-pkg-resources python2.7-dev 제안하는 패키지: python-distribute python-distribute-doc 다음 새 패키지를 설치할 것입니다: libssl-dev libssl-doc python-dev python-pkg-resources python-setuptools python2.7-dev 0개 업그레이드, 6개 새로 설치, 0개 제거 및 6개 업그레이드 안 함. 31.9 M바이트 아카이브를 받아야 합니다. 이 작업 후 42.7 M바이트의 디스크 공간을 더 사용하게 됩니다. 받기:1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libssl-dev armhf 1.0.1e-2+rvt+deb7u17 [1,500 kB] 받기:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libssl-doc all 1.0.1e-2+rvt+deb7u17 [1,199 kB] 받기:3 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python2.7-dev armhf 2.7.3-6+deb7u2 [28.7 MB] 받기:4 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-dev all 2.7.3-4+deb7u1 [920 B] 받기:5 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-pkg-resources all 0.6.24-1 [63.6 kB] 받기:6 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-setuptools all 0.6.24-1 [449 kB] 내려받기 31.9 M바이트, 소요시간 14초 (2,171 k바이트/초) Selecting previously unselected package libssl-dev. (데이터베이스 읽는중 ...현재 91702개의 파일과 디렉터리가 설치되어 있습니다.) libssl-dev 패키지를 푸는 중입니다 (.../libssl-dev_1.0.1e-2+rvt+deb7u17_armhf.deb에서) ... Selecting previously unselected package libssl-doc. libssl-doc 패키지를 푸는 중입니다 (.../libssl-doc_1.0.1e-2+rvt+deb7u17_all.deb에서) ... Selecting previously unselected package python2.7-dev. python2.7-dev 패키지를 푸는 중입니다 (.../python2.7-dev_2.7.3-6+deb7u2_armhf.deb에서) ... Selecting previously unselected package python-dev. python-dev 패키지를 푸는 중입니다 (.../python-dev_2.7.3-4+deb7u1_all.deb에서) ... Selecting previously unselected package python-pkg-resources. python-pkg-resources 패키지를 푸는 중입니다 (.../python-pkg-resources_0.6.24-1_all.deb에서) ... Selecting previously unselected package python-setuptools. python-setuptools 패키지를 푸는 중입니다 (.../python-setuptools_0.6.24-1_all.deb에서) ... man-db에 대한 트리거를 처리하는 중입니다 ... libssl-dev (1.0.1e-2+rvt+deb7u17) 설정하는 중입니다 ... libssl-doc (1.0.1e-2+rvt+deb7u17) 설정하는 중입니다 ... python2.7-dev (2.7.3-6+deb7u2) 설정하는 중입니다 ... python-dev (2.7.3-4+deb7u1) 설정하는 중입니다 ... python-pkg-resources (0.6.24-1) 설정하는 중입니다 ... python-setuptools (0.6.24-1) 설정하는 중입니다 ... Trying to install WebIOPi for Python 2.7.3 running install Checking .pth file support in /usr/local/lib/python2.7/dist-packages/ /usr/bin/python -E -c pass TEST PASSED: /usr/local/lib/python2.7/dist-packages/ appears to support .pth files running bdist_egg running egg_info creating WebIOPi.egg-info writing WebIOPi.egg-info/PKG-INFO writing top-level names to WebIOPi.egg-info/top_level.txt writing dependency_links to WebIOPi.egg-info/dependency_links.txt writing manifest file 'WebIOPi.egg-info/SOURCES.txt' reading manifest file 'WebIOPi.egg-info/SOURCES.txt' writing manifest file 'WebIOPi.egg-info/SOURCES.txt' installing library code to build/bdist.linux-armv7l/egg running install_lib running build_py creating build creating build/lib.linux-armv7l-2.7 creating build/lib.linux-armv7l-2.7/webiopi copying webiopi/__main__.py -> build/lib.linux-armv7l-2.7/webiopi copying webiopi/__init__.py -> build/lib.linux-armv7l-2.7/webiopi creating build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/crypto.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/config.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/loader.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/version.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/logger.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/types.py -> build/lib.linux-armv7l-2.7/webiopi/utils copying webiopi/utils/thread.py -> build/lib.linux-armv7l-2.7/webiopi/utils creating build/lib.linux-armv7l-2.7/webiopi/clients copying webiopi/clients/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/clients creating build/lib.linux-armv7l-2.7/webiopi/protocols copying webiopi/protocols/coap.py -> build/lib.linux-armv7l-2.7/webiopi/protocols copying webiopi/protocols/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/protocols copying webiopi/protocols/rest.py -> build/lib.linux-armv7l-2.7/webiopi/protocols copying webiopi/protocols/http.py -> build/lib.linux-armv7l-2.7/webiopi/protocols creating build/lib.linux-armv7l-2.7/webiopi/server copying webiopi/server/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/server creating build/lib.linux-armv7l-2.7/webiopi/decorators copying webiopi/decorators/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/decorators copying webiopi/decorators/rest.py -> build/lib.linux-armv7l-2.7/webiopi/decorators creating build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/i2c.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/onewire.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/spi.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/serial.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/bus.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/manager.py -> build/lib.linux-armv7l-2.7/webiopi/devices copying webiopi/devices/instance.py -> build/lib.linux-armv7l-2.7/webiopi/devices creating build/lib.linux-armv7l-2.7/webiopi/devices/digital copying webiopi/devices/digital/pcf8574.py -> build/lib.linux-armv7l-2.7/webiopi/devices/digital copying webiopi/devices/digital/ds2408.py -> build/lib.linux-armv7l-2.7/webiopi/devices/digital copying webiopi/devices/digital/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/devices/digital copying webiopi/devices/digital/mcp23XXX.py -> build/lib.linux-armv7l-2.7/webiopi/devices/digital copying webiopi/devices/digital/gpio.py -> build/lib.linux-armv7l-2.7/webiopi/devices/digital creating build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/pcf8591.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/mcp492X.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/mcp48XX.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/mcp3x0x.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/mcp4725.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/pca9685.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog copying webiopi/devices/analog/ads1x1x.py -> build/lib.linux-armv7l-2.7/webiopi/devices/analog creating build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/tslXXXX.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/onewiretemp.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/bmp085.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/hytXXX.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/tmpXXX.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor copying webiopi/devices/sensor/vcnl4000.py -> build/lib.linux-armv7l-2.7/webiopi/devices/sensor creating build/lib.linux-armv7l-2.7/webiopi/devices/shield copying webiopi/devices/shield/__init__.py -> build/lib.linux-armv7l-2.7/webiopi/devices/shield copying webiopi/devices/shield/piface.py -> build/lib.linux-armv7l-2.7/webiopi/devices/shield running build_ext building '_webiopi.GPIO' extension creating build/temp.linux-armv7l-2.7 creating build/temp.linux-armv7l-2.7/native gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c native/bridge.c -o build/temp.linux-armv7l-2.7/native/bridge.o gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c native/gpio.c -o build/temp.linux-armv7l-2.7/native/gpio.o gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c native/cpuinfo.c -o build/temp.linux-armv7l-2.7/native/cpuinfo.o creating build/lib.linux-armv7l-2.7/_webiopi gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/native/bridge.o build/temp.linux-armv7l-2.7/native/gpio.o build/temp.linux-armv7l-2.7/native/cpuinfo.o -o build/lib.linux-armv7l-2.7/_webiopi/GPIO.so creating build/bdist.linux-armv7l creating build/bdist.linux-armv7l/egg creating build/bdist.linux-armv7l/egg/webiopi creating build/bdist.linux-armv7l/egg/webiopi/server copying build/lib.linux-armv7l-2.7/webiopi/server/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/server copying build/lib.linux-armv7l-2.7/webiopi/__main__.py -> build/bdist.linux-armv7l/egg/webiopi creating build/bdist.linux-armv7l/egg/webiopi/decorators copying build/lib.linux-armv7l-2.7/webiopi/decorators/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/decorators copying build/lib.linux-armv7l-2.7/webiopi/decorators/rest.py -> build/bdist.linux-armv7l/egg/webiopi/decorators copying build/lib.linux-armv7l-2.7/webiopi/__init__.py -> build/bdist.linux-armv7l/egg/webiopi creating build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/crypto.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/config.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/loader.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/version.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/logger.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/types.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-2.7/webiopi/utils/thread.py -> build/bdist.linux-armv7l/egg/webiopi/utils creating build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-2.7/webiopi/protocols/coap.py -> build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-2.7/webiopi/protocols/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-2.7/webiopi/protocols/rest.py -> build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-2.7/webiopi/protocols/http.py -> build/bdist.linux-armv7l/egg/webiopi/protocols creating build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-2.7/webiopi/devices/i2c.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-2.7/webiopi/devices/digital/pcf8574.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-2.7/webiopi/devices/digital/ds2408.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-2.7/webiopi/devices/digital/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-2.7/webiopi/devices/digital/mcp23XXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-2.7/webiopi/devices/digital/gpio.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-2.7/webiopi/devices/onewire.py -> build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-2.7/webiopi/devices/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-2.7/webiopi/devices/spi.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/shield copying build/lib.linux-armv7l-2.7/webiopi/devices/shield/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/shield copying build/lib.linux-armv7l-2.7/webiopi/devices/shield/piface.py -> build/bdist.linux-armv7l/egg/webiopi/devices/shield copying build/lib.linux-armv7l-2.7/webiopi/devices/serial.py -> build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-2.7/webiopi/devices/bus.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/pcf8591.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/mcp492X.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/mcp48XX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/mcp3x0x.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/mcp4725.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/pca9685.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/analog/ads1x1x.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-2.7/webiopi/devices/manager.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/tslXXXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/onewiretemp.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/bmp085.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/hytXXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/tmpXXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/sensor/vcnl4000.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-2.7/webiopi/devices/instance.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/clients copying build/lib.linux-armv7l-2.7/webiopi/clients/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/clients creating build/bdist.linux-armv7l/egg/_webiopi copying build/lib.linux-armv7l-2.7/_webiopi/GPIO.so -> build/bdist.linux-armv7l/egg/_webiopi byte-compiling build/bdist.linux-armv7l/egg/webiopi/server/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/__main__.py to __main__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/decorators/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/decorators/rest.py to rest.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/crypto.py to crypto.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/config.py to config.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/loader.py to loader.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/version.py to version.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/logger.py to logger.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/types.py to types.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/thread.py to thread.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/coap.py to coap.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/rest.py to rest.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/http.py to http.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/i2c.py to i2c.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/pcf8574.py to pcf8574.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/ds2408.py to ds2408.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/mcp23XXX.py to mcp23XXX.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/gpio.py to gpio.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/onewire.py to onewire.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/spi.py to spi.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/shield/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/shield/piface.py to piface.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/serial.py to serial.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/bus.py to bus.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/pcf8591.py to pcf8591.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp492X.py to mcp492X.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp48XX.py to mcp48XX.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp3x0x.py to mcp3x0x.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp4725.py to mcp4725.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/pca9685.py to pca9685.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/ads1x1x.py to ads1x1x.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/manager.py to manager.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/tslXXXX.py to tslXXXX.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/onewiretemp.py to onewiretemp.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/bmp085.py to bmp085.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/__init__.py to __init__.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/hytXXX.py to hytXXX.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/tmpXXX.py to tmpXXX.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/vcnl4000.py to vcnl4000.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/instance.py to instance.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/clients/__init__.py to __init__.pyc creating stub loader for _webiopi/GPIO.so Creating missing __init__.py for _webiopi byte-compiling build/bdist.linux-armv7l/egg/_webiopi/GPIO.py to GPIO.pyc byte-compiling build/bdist.linux-armv7l/egg/_webiopi/__init__.py to __init__.pyc creating build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt zip_safe flag not set; analyzing archive contents... creating dist creating 'dist/WebIOPi-0.7.1-py2.7-linux-armv7l.egg' and adding 'build/bdist.linux-armv7l/egg' to it removing 'build/bdist.linux-armv7l/egg' (and everything under it) Processing WebIOPi-0.7.1-py2.7-linux-armv7l.egg creating /usr/local/lib/python2.7/dist-packages/WebIOPi-0.7.1-py2.7-linux-armv7l.egg Extracting WebIOPi-0.7.1-py2.7-linux-armv7l.egg to /usr/local/lib/python2.7/dist-packages Adding WebIOPi 0.7.1 to easy-install.pth file Installed /usr/local/lib/python2.7/dist-packages/WebIOPi-0.7.1-py2.7-linux-armv7l.egg Processing dependencies for WebIOPi==0.7.1 Finished processing dependencies for WebIOPi==0.7.1 WebIOPi installed for Python 2.7.3 Found Python 3.2.3... Trying to install python3-dev using apt-get 패키지 목록을 읽는 중입니다... 완료 의존성 트리를 만드는 중입니다 상태 정보를 읽는 중입니다... 완료 다음 패키지를 더 설치할 것입니다: libpython3.2 python3-pkg-resources python3.2-dev 다음 새 패키지를 설치할 것입니다: libpython3.2 python3-dev python3-pkg-resources python3-setuptools python3.2-dev 0개 업그레이드, 5개 새로 설치, 0개 제거 및 6개 업그레이드 안 함. 32.4 M바이트 아카이브를 받아야 합니다. 이 작업 후 42.0 M바이트의 디스크 공간을 더 사용하게 됩니다. 받기:1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libpython3.2 armhf 3.2.3-7 [1,173 kB] 받기:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python3.2-dev armhf 3.2.3-7 [30.9 MB] 받기:3 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python3-dev all 3.2.3-6 [1,062 B] 받기:4 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python3-pkg-resources all 0.6.24-1 [33.9 kB] 받기:5 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python3-setuptools all 0.6.24-1 [363 kB] 내려받기 32.4 M바이트, 소요시간 14초 (2,311 k바이트/초) Selecting previously unselected package libpython3.2. (데이터베이스 읽는중 ...현재 93423개의 파일과 디렉터리가 설치되어 있습니다.) libpython3.2 패키지를 푸는 중입니다 (.../libpython3.2_3.2.3-7_armhf.deb에서) ... Selecting previously unselected package python3.2-dev. python3.2-dev 패키지를 푸는 중입니다 (.../python3.2-dev_3.2.3-7_armhf.deb에서) ... Selecting previously unselected package python3-dev. python3-dev 패키지를 푸는 중입니다 (.../python3-dev_3.2.3-6_all.deb에서) ... Selecting previously unselected package python3-pkg-resources. python3-pkg-resources 패키지를 푸는 중입니다 (.../python3-pkg-resources_0.6.24-1_all.deb에서) ... Selecting previously unselected package python3-setuptools. python3-setuptools 패키지를 푸는 중입니다 (.../python3-setuptools_0.6.24-1_all.deb에서) ... man-db에 대한 트리거를 처리하는 중입니다 ... libpython3.2 (3.2.3-7) 설정하는 중입니다 ... python3.2-dev (3.2.3-7) 설정하는 중입니다 ... python3-dev (3.2.3-6) 설정하는 중입니다 ... python3-pkg-resources (0.6.24-1) 설정하는 중입니다 ... python3-setuptools (0.6.24-1) 설정하는 중입니다 ... Trying to install WebIOPi for Python 3.2.3 running install Checking .pth file support in /usr/local/lib/python3.2/dist-packages/ /usr/bin/python3 -E -c pass TEST PASSED: /usr/local/lib/python3.2/dist-packages/ appears to support .pth files running bdist_egg running egg_info writing WebIOPi.egg-info/PKG-INFO writing top-level names to WebIOPi.egg-info/top_level.txt writing dependency_links to WebIOPi.egg-info/dependency_links.txt reading manifest file 'WebIOPi.egg-info/SOURCES.txt' writing manifest file 'WebIOPi.egg-info/SOURCES.txt' installing library code to build/bdist.linux-armv7l/egg running install_lib running build_py creating build/lib.linux-armv7l-3.2 creating build/lib.linux-armv7l-3.2/webiopi copying webiopi/__main__.py -> build/lib.linux-armv7l-3.2/webiopi copying webiopi/__init__.py -> build/lib.linux-armv7l-3.2/webiopi creating build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/crypto.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/config.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/loader.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/version.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/logger.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/types.py -> build/lib.linux-armv7l-3.2/webiopi/utils copying webiopi/utils/thread.py -> build/lib.linux-armv7l-3.2/webiopi/utils creating build/lib.linux-armv7l-3.2/webiopi/clients copying webiopi/clients/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/clients creating build/lib.linux-armv7l-3.2/webiopi/protocols copying webiopi/protocols/coap.py -> build/lib.linux-armv7l-3.2/webiopi/protocols copying webiopi/protocols/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/protocols copying webiopi/protocols/rest.py -> build/lib.linux-armv7l-3.2/webiopi/protocols copying webiopi/protocols/http.py -> build/lib.linux-armv7l-3.2/webiopi/protocols creating build/lib.linux-armv7l-3.2/webiopi/server copying webiopi/server/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/server creating build/lib.linux-armv7l-3.2/webiopi/decorators copying webiopi/decorators/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/decorators copying webiopi/decorators/rest.py -> build/lib.linux-armv7l-3.2/webiopi/decorators creating build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/i2c.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/onewire.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/spi.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/serial.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/bus.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/manager.py -> build/lib.linux-armv7l-3.2/webiopi/devices copying webiopi/devices/instance.py -> build/lib.linux-armv7l-3.2/webiopi/devices creating build/lib.linux-armv7l-3.2/webiopi/devices/digital copying webiopi/devices/digital/pcf8574.py -> build/lib.linux-armv7l-3.2/webiopi/devices/digital copying webiopi/devices/digital/ds2408.py -> build/lib.linux-armv7l-3.2/webiopi/devices/digital copying webiopi/devices/digital/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/devices/digital copying webiopi/devices/digital/mcp23XXX.py -> build/lib.linux-armv7l-3.2/webiopi/devices/digital copying webiopi/devices/digital/gpio.py -> build/lib.linux-armv7l-3.2/webiopi/devices/digital creating build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/pcf8591.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/mcp492X.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/mcp48XX.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/mcp3x0x.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/mcp4725.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/pca9685.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog copying webiopi/devices/analog/ads1x1x.py -> build/lib.linux-armv7l-3.2/webiopi/devices/analog creating build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/tslXXXX.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/onewiretemp.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/bmp085.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/hytXXX.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/tmpXXX.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor copying webiopi/devices/sensor/vcnl4000.py -> build/lib.linux-armv7l-3.2/webiopi/devices/sensor creating build/lib.linux-armv7l-3.2/webiopi/devices/shield copying webiopi/devices/shield/__init__.py -> build/lib.linux-armv7l-3.2/webiopi/devices/shield copying webiopi/devices/shield/piface.py -> build/lib.linux-armv7l-3.2/webiopi/devices/shield running build_ext building '_webiopi.GPIO' extension creating build/temp.linux-armv7l-3.2 creating build/temp.linux-armv7l-3.2/native gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -fPIC -I/usr/include/python3.2mu -c native/bridge.c -o build/temp.linux-armv7l-3.2/native/bridge.o gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -fPIC -I/usr/include/python3.2mu -c native/gpio.c -o build/temp.linux-armv7l-3.2/native/gpio.o gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -fPIC -I/usr/include/python3.2mu -c native/cpuinfo.c -o build/temp.linux-armv7l-3.2/native/cpuinfo.o native/cpuinfo.c: In function ‘get_cpuinfo_revision’: native/cpuinfo.c:38:12: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result] creating build/lib.linux-armv7l-3.2/_webiopi gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-3.2/native/bridge.o build/temp.linux-armv7l-3.2/native/gpio.o build/temp.linux-armv7l-3.2/native/cpuinfo.o -o build/lib.linux-armv7l-3.2/_webiopi/GPIO.cpython-32mu.so creating build/bdist.linux-armv7l/egg creating build/bdist.linux-armv7l/egg/webiopi creating build/bdist.linux-armv7l/egg/webiopi/server copying build/lib.linux-armv7l-3.2/webiopi/server/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/server copying build/lib.linux-armv7l-3.2/webiopi/__main__.py -> build/bdist.linux-armv7l/egg/webiopi creating build/bdist.linux-armv7l/egg/webiopi/decorators copying build/lib.linux-armv7l-3.2/webiopi/decorators/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/decorators copying build/lib.linux-armv7l-3.2/webiopi/decorators/rest.py -> build/bdist.linux-armv7l/egg/webiopi/decorators copying build/lib.linux-armv7l-3.2/webiopi/__init__.py -> build/bdist.linux-armv7l/egg/webiopi creating build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/crypto.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/config.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/loader.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/version.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/logger.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/types.py -> build/bdist.linux-armv7l/egg/webiopi/utils copying build/lib.linux-armv7l-3.2/webiopi/utils/thread.py -> build/bdist.linux-armv7l/egg/webiopi/utils creating build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-3.2/webiopi/protocols/coap.py -> build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-3.2/webiopi/protocols/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-3.2/webiopi/protocols/rest.py -> build/bdist.linux-armv7l/egg/webiopi/protocols copying build/lib.linux-armv7l-3.2/webiopi/protocols/http.py -> build/bdist.linux-armv7l/egg/webiopi/protocols creating build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-3.2/webiopi/devices/i2c.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-3.2/webiopi/devices/digital/pcf8574.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-3.2/webiopi/devices/digital/ds2408.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-3.2/webiopi/devices/digital/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-3.2/webiopi/devices/digital/mcp23XXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-3.2/webiopi/devices/digital/gpio.py -> build/bdist.linux-armv7l/egg/webiopi/devices/digital copying build/lib.linux-armv7l-3.2/webiopi/devices/onewire.py -> build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-3.2/webiopi/devices/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-3.2/webiopi/devices/spi.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/shield copying build/lib.linux-armv7l-3.2/webiopi/devices/shield/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/shield copying build/lib.linux-armv7l-3.2/webiopi/devices/shield/piface.py -> build/bdist.linux-armv7l/egg/webiopi/devices/shield copying build/lib.linux-armv7l-3.2/webiopi/devices/serial.py -> build/bdist.linux-armv7l/egg/webiopi/devices copying build/lib.linux-armv7l-3.2/webiopi/devices/bus.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/pcf8591.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/mcp492X.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/mcp48XX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/mcp3x0x.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/mcp4725.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/pca9685.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/analog/ads1x1x.py -> build/bdist.linux-armv7l/egg/webiopi/devices/analog copying build/lib.linux-armv7l-3.2/webiopi/devices/manager.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/tslXXXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/onewiretemp.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/bmp085.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/hytXXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/tmpXXX.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/sensor/vcnl4000.py -> build/bdist.linux-armv7l/egg/webiopi/devices/sensor copying build/lib.linux-armv7l-3.2/webiopi/devices/instance.py -> build/bdist.linux-armv7l/egg/webiopi/devices creating build/bdist.linux-armv7l/egg/webiopi/clients copying build/lib.linux-armv7l-3.2/webiopi/clients/__init__.py -> build/bdist.linux-armv7l/egg/webiopi/clients creating build/bdist.linux-armv7l/egg/_webiopi copying build/lib.linux-armv7l-3.2/_webiopi/GPIO.cpython-32mu.so -> build/bdist.linux-armv7l/egg/_webiopi byte-compiling build/bdist.linux-armv7l/egg/webiopi/server/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/__main__.py to __main__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/decorators/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/decorators/rest.py to rest.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/crypto.py to crypto.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/config.py to config.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/loader.py to loader.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/version.py to version.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/logger.py to logger.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/types.py to types.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/utils/thread.py to thread.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/coap.py to coap.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/rest.py to rest.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/protocols/http.py to http.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/i2c.py to i2c.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/pcf8574.py to pcf8574.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/ds2408.py to ds2408.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/mcp23XXX.py to mcp23XXX.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/digital/gpio.py to gpio.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/onewire.py to onewire.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/spi.py to spi.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/shield/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/shield/piface.py to piface.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/serial.py to serial.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/bus.py to bus.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/pcf8591.py to pcf8591.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp492X.py to mcp492X.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp48XX.py to mcp48XX.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp3x0x.py to mcp3x0x.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/mcp4725.py to mcp4725.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/pca9685.py to pca9685.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/analog/ads1x1x.py to ads1x1x.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/manager.py to manager.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/tslXXXX.py to tslXXXX.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/onewiretemp.py to onewiretemp.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/bmp085.py to bmp085.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/__init__.py to __init__.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/hytXXX.py to hytXXX.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/tmpXXX.py to tmpXXX.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/sensor/vcnl4000.py to vcnl4000.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/devices/instance.py to instance.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/webiopi/clients/__init__.py to __init__.cpython-32.pyc creating stub loader for _webiopi/GPIO.cpython-32mu.so Creating missing __init__.py for _webiopi byte-compiling build/bdist.linux-armv7l/egg/_webiopi/GPIO.py to GPIO.cpython-32.pyc byte-compiling build/bdist.linux-armv7l/egg/_webiopi/__init__.py to __init__.cpython-32.pyc creating build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO copying WebIOPi.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt zip_safe flag not set; analyzing archive contents... _webiopi.__pycache__.GPIO.cpython-32: module references __file__ creating 'dist/WebIOPi-0.7.1-py3.2-linux-armv7l.egg' and adding 'build/bdist.linux-armv7l/egg' to it removing 'build/bdist.linux-armv7l/egg' (and everything under it) Processing WebIOPi-0.7.1-py3.2-linux-armv7l.egg creating /usr/local/lib/python3.2/dist-packages/WebIOPi-0.7.1-py3.2-linux-armv7l.egg Extracting WebIOPi-0.7.1-py3.2-linux-armv7l.egg to /usr/local/lib/python3.2/dist-packages Adding WebIOPi 0.7.1 to easy-install.pth file Installed /usr/local/lib/python3.2/dist-packages/WebIOPi-0.7.1-py3.2-linux-armv7l.egg Processing dependencies for WebIOPi==0.7.1 Finished processing dependencies for WebIOPi==0.7.1 WebIOPi installed for Python 3.2.3 Copying HTML resources... `htdocs' -> `/usr/share/webiopi/htdocs' `htdocs/jquery.js' -> `/usr/share/webiopi/htdocs/jquery.js' `htdocs/index.html' -> `/usr/share/webiopi/htdocs/index.html' `htdocs/app' -> `/usr/share/webiopi/htdocs/app' `htdocs/app/gpio-list' -> `/usr/share/webiopi/htdocs/app/gpio-list' `htdocs/app/gpio-list/index.html' -> `/usr/share/webiopi/htdocs/app/gpio-list/index.html' `htdocs/app/devices-monitor' -> `/usr/share/webiopi/htdocs/app/devices-monitor' `htdocs/app/devices-monitor/index.html' -> `/usr/share/webiopi/htdocs/app/devices-monitor/index.html' `htdocs/app/serial-monitor' -> `/usr/share/webiopi/htdocs/app/serial-monitor' `htdocs/app/serial-monitor/index.html' -> `/usr/share/webiopi/htdocs/app/serial-monitor/index.html' `htdocs/app/gpio-header' -> `/usr/share/webiopi/htdocs/app/gpio-header' `htdocs/app/gpio-header/index.html' -> `/usr/share/webiopi/htdocs/app/gpio-header/index.html' `htdocs/webiopi.css' -> `/usr/share/webiopi/htdocs/webiopi.css' `htdocs/webiopi.js' -> `/usr/share/webiopi/htdocs/webiopi.js' Copying default config file... `python/config' -> `/etc/webiopi/config' Copying default passwd file... `python/passwd' -> `/etc/webiopi/passwd' Installing startup script... Installing webiopi command... Installing webiopi-passwd command... Do you want to access WebIOPi over Internet ? [y/n] y Extracting Weaved Software into /home/pi/src/WebIOPi-0.7.1 Finished extracting You are running installer script Version: v1.3 Last modified on February 3, 2015, by Mike Young. Now launching the Weaved connectd daemon installer... . Sorry, you are running this installer on an unsupported platform. But if you go to http://forum.weaved.com we'll be happy to help you get your platform up and running. Thanks! WebIOPi successfully installed * To start WebIOPi foreground : sudo webiopi [-h] [-c config] [-l log] [-s script] [-d] [port] * To start WebIOPi background : sudo /etc/init.d/webiopi start * To start WebIOPi at boot : sudo update-rc.d webiopi defaults * Weaved IoT Kit installed, log on http://developer.weaved.com to access your device * Look in /home/pi/src/WebIOPi-0.7.1/examples for Python library usage examples |
기본 포트 8000번
$ sudo vi /etc/webiopi/config [HTTP] # HTTP Server configuration enabled = true port = 8000 # File containing sha256(base64("user:password")) # Use webiopi-passwd command to generate it passwd-file = /etc/webiopi/passwd # Change login prompt message prompt = "WebIOPi" |
로그인 계정
id: webiopi
pw: raspberry
음..
음.. 되는게 없네? ㅠㅠ
---
rpi 2b용 패치 라는데..
패치하고 나니 좀 먼가 많아졌다?
[링크 : https://groups.google.com/forum/#!topic/webiopi/RGtrRfFJMKY]
[링크 : https://github.com/doublebind/raspi] << 패치 내용 확인요망
openCV 3.0.0 on 라즈베리 파이 2 (0) | 2015.10.06 |
---|---|
opencv 템플릿 매칭 / wiring pi PWM ing.. (0) | 2015.10.05 |
라즈베리 파이 v4l2-ctl 관련 (0) | 2015.10.01 |
라즈베리 파이 2 + usb webcam + servo 2ch (2) | 2015.09.28 |
라즈베리 파이 PWM 데이터 시트 (0) | 2015.09.28 |
엥? 2.1에서 단순하게 neon 활성화 하는데 이렇게 오른다고? ㄷㄷㄷ
OpenCv 2.1
– cvMatchTemplate() algorithm as the test case
cvMatchTemplate( img, tpl, res, CV_TM_CCORR_NORMED );
Flags:
CFLAGS += -pipe -O3
• Result: ~19.35sec @800Mhz
Flags:
CFLAGS += -pipe -O3 -mfpu=neon -ftree-vectorize -mfloat-abi=softfp
• Result: ~4.91sec @800Mhz
~75% increase in performance
[링크 : http://elinux.org/images/1/1c/Optimizing_the_Embedded_Platform_Using_OpenCV.pdf]
[링크 : http://answers.opencv.org/question/33940/are-these-functions-accelerated-by-arm-neon/]
[링크 : http://answers.opencv.org/question/17845/open-source-neon-optimizations/]
NEON intrinsics 노가다..
[링크 : http://web.stanford.edu/class/cs231m/lectures/lecture-4-opencv.pdf]
+
g++ -lopencv_core -lopencv_video -lopencv_highgui -lopencv_imgproc -mfpu=neon -ftree-vectorize -mfloat-abi=hard MatchTemplate_Demo.cpp -o b.out
./b.out 1.jpg 2.jpg
openCV 3.0 부터 제한적으로 NEON을 옵션으로 제공하는 듯...
[링크 : http://answers.opencv.org/question/35233/neon-support-in-opencv/]
opencv 마우스 이벤트 관련 2 (0) | 2015.10.05 |
---|---|
opencv 템플릿 매칭 코드 관련 (0) | 2015.10.03 |
openCV 템플릿 매칭 예제 실행 (0) | 2015.10.01 |
opencv 버전들 (0) | 2015.09.30 |
opencv 템플릿 매칭 관련 (0) | 2015.09.28 |
1.jpg 816*612
2.jpg 190x44
x forwarding으로 해서 느린건지.. 일단은 미지수
암튼 실시간으로 추적은 힘들 수준이랄까..
해상도를 더 낮추지 않으면 1초에 1번 검색하기도 벅찰듯..
$ wget https://raw.githubusercontent.com/Itseez/opencv/master/samples/cpp/tutorial_code/Histograms_Matching/MatchTemplate_Demo.cpp $ g++ -lopencv_imgproc -lopencv_core -lopencv_highgui MatchTemplate_Demo.cpp -o b.out $ ./b.out 1.jpg 2.jpg |
소스중에 이 부분을 주석처리 해주어야 함(사용 안하는 부분인가..)
#include "opencv2/imgcodecs.hpp"
결과물.. 아무튼 6가지 중에 2개 정도는 정상적으로 위치를 잡아 내지 못했다.
시간은 나중에 따로 프로그램 수정해서 측정을 해봐야 할 듯
SQDIFF / TM COEFF NORMED 두가지가 무난해 보이는데..
공식을 보면.. SQDIFF가 가장 CPU를 조금 쓸것으로 예상되긴 한다.
[링크 : http://docs.opencv.org/doc/tutorials/imgproc/histograms/template_matching/template_matching.html]
SQDIFF
SQDIFF NORMED
TM CCORR
TM CCORR NORMED
TM COEFF
TM COEFF NORMED
opencv 템플릿 매칭 코드 관련 (0) | 2015.10.03 |
---|---|
opencv neon 최적화 (0) | 2015.10.01 |
opencv 버전들 (0) | 2015.09.30 |
opencv 템플릿 매칭 관련 (0) | 2015.09.28 |
openCV 에피폴라 기하 관련 내용 (0) | 2015.09.28 |
$ dmesg [ 6.294914] media: Linux media interface: v0.10 [ 6.324668] Linux video capture interface: v2.00 [ 6.381431] bcm2835-v4l2: scene mode selected 0, was 0 [ 6.381912] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1280x720 [ 6.396970] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. |
$ v4l2-ctl General/Common options: --all display all information available -C, --get-ctrl=<ctrl>[,<ctrl>...] get the value of the controls [VIDIOC_G_EXT_CTRLS] -c, --set-ctrl=<ctrl>=<val>[,<ctrl>=<val>...] set the value of the controls [VIDIOC_S_EXT_CTRLS] -D, --info show driver info [VIDIOC_QUERYCAP] -d, --device=<dev> use device <dev> instead of /dev/video0 if <dev> starts with a digit, then /dev/video<dev> is used -h, --help display this help message --help-all all options --help-io input/output options --help-misc miscellaneous options --help-overlay overlay format options --help-selection crop/selection options --help-stds standards and other video timings options --help-streaming streaming options --help-tuner tuner/modulator options --help-vbi VBI format options --help-vidcap video capture format options --help-vidout vidout output format options -k, --concise be more concise if possible. -l, --list-ctrls display all controls and their values [VIDIOC_QUERYCTRL] -L, --list-ctrls-menus display all controls and their menus [VIDIOC_QUERYMENU] -w, --wrapper use the libv4l2 wrapper library. --list-devices list all v4l devices --log-status log the board status in the kernel log [VIDIOC_LOG_STATUS] --get-priority query the current access priority [VIDIOC_G_PRIORITY] --set-priority=<prio> set the new access priority [VIDIOC_S_PRIORITY] <prio> is 1 (background), 2 (interactive) or 3 (record) --silent only set the result code, do not print any messages --sleep=<secs> sleep <secs>, call QUERYCAP and close the file handle --verbose turn on verbose ioctl status reporting |
$ v4l2-ctl --help-all General/Common options: --all display all information available -C, --get-ctrl=<ctrl>[,<ctrl>...] get the value of the controls [VIDIOC_G_EXT_CTRLS] -c, --set-ctrl=<ctrl>=<val>[,<ctrl>=<val>...] set the value of the controls [VIDIOC_S_EXT_CTRLS] -D, --info show driver info [VIDIOC_QUERYCAP] -d, --device=<dev> use device <dev> instead of /dev/video0 if <dev> starts with a digit, then /dev/video<dev> is used -h, --help display this help message --help-all all options --help-io input/output options --help-misc miscellaneous options --help-overlay overlay format options --help-selection crop/selection options --help-stds standards and other video timings options --help-streaming streaming options --help-tuner tuner/modulator options --help-vbi VBI format options --help-vidcap video capture format options --help-vidout vidout output format options -k, --concise be more concise if possible. -l, --list-ctrls display all controls and their values [VIDIOC_QUERYCTRL] -L, --list-ctrls-menus display all controls and their menus [VIDIOC_QUERYMENU] -w, --wrapper use the libv4l2 wrapper library. --list-devices list all v4l devices --log-status log the board status in the kernel log [VIDIOC_LOG_STATUS] --get-priority query the current access priority [VIDIOC_G_PRIORITY] --set-priority=<prio> set the new access priority [VIDIOC_S_PRIORITY] <prio> is 1 (background), 2 (interactive) or 3 (record) --silent only set the result code, do not print any messages --sleep=<secs> sleep <secs>, call QUERYCAP and close the file handle --verbose turn on verbose ioctl status reporting Tuner/Modulator options: -F, --get-freq query the frequency [VIDIOC_G_FREQUENCY] -f, --set-freq=<freq> set the frequency to <freq> MHz [VIDIOC_S_FREQUENCY] -T, --get-tuner query the tuner settings [VIDIOC_G_TUNER] -t, --set-tuner=<mode> set the audio mode of the tuner [VIDIOC_S_TUNER] Possible values: mono, stereo, lang2, lang1, bilingual --tuner-index=<idx> Use idx as tuner idx for tuner/modulator commands --list-freq-bands display all frequency bands for the tuner/modulator [VIDIOC_ENUM_FREQ_BANDS] --get-modulator query the modulator settings [VIDIOC_G_MODULATOR] --set-modulator=<txsubchans> set the sub-carrier modulation [VIDIOC_S_MODULATOR] <txsubchans> is one of: mono: Modulate as mono mono-rds: Modulate as mono with RDS (radio only) stereo: Modulate as stereo stereo-rds: Modulate as stereo with RDS (radio only) bilingual: Modulate as bilingual mono-sap: Modulate as mono with Second Audio Program stereo-sap: Modulate as stereo with Second Audio Program --freq-seek=dir=<0/1>,wrap=<0/1>,spacing=<hz>,low=<freq>,high=<freq> perform a hardware frequency seek [VIDIOC_S_HW_FREQ_SEEK] dir is 0 (seek downward) or 1 (seek upward) wrap is 0 (do not wrap around) or 1 (wrap around) spacing sets the seek resolution (use 0 for default) low and high set the low and high seek frequency range in MHz Input/Output options: -I, --get-input query the video input [VIDIOC_G_INPUT] -i, --set-input=<num> set the video input to <num> [VIDIOC_S_INPUT] -N, --list-outputs display video outputs [VIDIOC_ENUMOUTPUT] -n, --list-inputs display video inputs [VIDIOC_ENUMINPUT] -O, --get-output query the video output [VIDIOC_G_OUTPUT] -o, --set-output=<num> set the video output to <num> [VIDIOC_S_OUTPUT] --set-audio-output=<num> set the audio output to <num> [VIDIOC_S_AUDOUT] --get-audio-input query the audio input [VIDIOC_G_AUDIO] --set-audio-input=<num> set the audio input to <num> [VIDIOC_S_AUDIO] --get-audio-output query the audio output [VIDIOC_G_AUDOUT] --set-audio-output=<num> set the audio output to <num> [VIDIOC_S_AUDOUT] --list-audio-outputs display audio outputs [VIDIOC_ENUMAUDOUT] --list-audio-inputs display audio inputs [VIDIOC_ENUMAUDIO] Standards/Timings options: --list-standards display supported video standards [VIDIOC_ENUMSTD] -S, --get-standard query the video standard [VIDIOC_G_STD] -s, --set-standard=<num> set the video standard to <num> [VIDIOC_S_STD] <num> a numerical v4l2_std value, or one of: pal or pal-X (X = B/G/H/N/Nc/I/D/K/M/60) (V4L2_STD_PAL) ntsc or ntsc-X (X = M/J/K) (V4L2_STD_NTSC) secam or secam-X (X = B/G/H/D/K/L/Lc) (V4L2_STD_SECAM) --get-detected-standard display detected input video standard [VIDIOC_QUERYSTD] --list-dv-timings list supp. standard dv timings [VIDIOC_ENUM_DV_TIMINGS] --set-dv-bt-timings query: use the output of VIDIOC_QUERY_DV_TIMINGS index=<index>: use the index as provided by --list-dv-timings or give a fully specified timings: width=<width>,height=<height>,interlaced=<0/1>, polarities=<polarities mask>,pixelclock=<pixelclock Hz>, hfp=<horizontal front porch>,hs=<horizontal sync>, hbp=<horizontal back porch>,vfp=<vertical front porch>, vs=<vertical sync>,vbp=<vertical back porch>, il_vfp=<vertical front porch for bottom field>, il_vs=<vertical sync for bottom field>, il_vbp=<vertical back porch for bottom field>, set the digital video timings according to the BT 656/1120 standard [VIDIOC_S_DV_TIMINGS] --get-dv-timings get the digital video timings in use [VIDIOC_G_DV_TIMINGS] --query-dv-timings query the detected dv timings [VIDIOC_QUERY_DV_TIMINGS] --get-dv-timings-cap get the dv timings capabilities [VIDIOC_DV_TIMINGS_CAP] Video Capture Formats options: --list-formats display supported video formats [VIDIOC_ENUM_FMT] --list-formats-mplane display supported video multi-planar formats [VIDIOC_ENUM_FMT] --list-formats-ext display supported video formats including frame sizes and intervals --list-formats-ext-mplane display supported video multi-planar formats including frame sizes and intervals --list-framesizes=<f> list supported framesizes for pixelformat <f> [VIDIOC_ENUM_FRAMESIZES] pixelformat is the fourcc value as a string --list-frameintervals=width=<w>,height=<h>,pixelformat=<f> list supported frame intervals for pixelformat <f> and the given width and height [VIDIOC_ENUM_FRAMEINTERVALS] pixelformat is the fourcc value as a string -V, --get-fmt-video query the video capture format [VIDIOC_G_FMT] -v, --set-fmt-video=width=<w>,height=<h>,pixelformat=<f> set the video capture format [VIDIOC_S_FMT] pixelformat is either the format index as reported by --list-formats, or the fourcc value as a string --try-fmt-video=width=<w>,height=<h>,pixelformat=<f> try the video capture format [VIDIOC_TRY_FMT] pixelformat is either the format index as reported by --list-formats, or the fourcc value as a string --get-fmt-video-mplane query the video capture format through the multi-planar API [VIDIOC_G_FMT] --set-fmt-video-mplane --try-fmt-video-mplane=width=<w>,height=<h>,pixelformat=<f> set/try the video capture format using the multi-planar API [VIDIOC_S/TRY_FMT] pixelformat is either the format index as reported by --list-formats-mplane, or the fourcc value as a string Video Output Formats options: --list-formats-out display supported video output formats [VIDIOC_ENUM_FMT] --get-fmt-video-out query the video output format [VIDIOC_G_FMT] --set-fmt-video-out --try-fmt-video-out=width=<w>,height=<h>,pixelformat=<f> set/try the video output format [VIDIOC_TRY_FMT] pixelformat is either the format index as reported by --list-formats-out, or the fourcc value as a string --list-formats-out-mplane display supported video output multi-planar formats [VIDIOC_ENUM_FMT] --get-fmt-video-out-mplane query the video output format using the multi-planar API [VIDIOC_G_FMT] --set-fmt-video-out-mplane --try-fmt-video-out-mplane=width=<w>,height=<h>,pixelformat=<f> set/try the video output format with the multi-planar API [VIDIOC_S/TRY_FMT] pixelformat is either the format index as reported by --list-formats-out-mplane, or the fourcc value as a string Video Overlay options: --list-formats-overlay display supported overlay formats [VIDIOC_ENUM_FMT] --overlay=<on> turn overlay on (1) or off (0) (VIDIOC_OVERLAY) --get-fmt-overlay query the video overlay format [VIDIOC_G_FMT] --get-fmt-output-overlay query the video output overlay format [VIDIOC_G_FMT] --set-fmt-overlay --try-fmt-overlay --set-fmt-output-overlay --try-fmt-output-overlay=chromakey=<key>,global_alpha=<alpha>, top=<t>,left=<l>,width=<w>,height=<h>,field=<f> set/try the video or video output overlay format [VIDIOC_S/TRY_FMT], <f> can be one of: any, none, top, bottom, interlaced, seq_tb, seq_bt, alternate, interlaced_tb, interlaced_bt --get-fbuf query the overlay framebuffer data [VIDIOC_G_FBUF] --set-fbuf=chromakey=<b>,global_alpha=<b>,local_alpha=<b>,local_inv_alpha=<b> set the overlay framebuffer [VIDIOC_S_FBUF] b = 0 or 1 VBI Formats options: --get-sliced-vbi-cap query the sliced VBI capture capabilities [VIDIOC_G_SLICED_VBI_CAP] --get-sliced-vbi-out-cap query the sliced VBI output capabilities [VIDIOC_G_SLICED_VBI_CAP] -B, --get-fmt-sliced-vbi query the sliced VBI capture format [VIDIOC_G_FMT] --get-fmt-sliced-vbi-out query the sliced VBI output format [VIDIOC_G_FMT] -b, --set-fmt-sliced-vbi --try-fmt-sliced-vbi --set-fmt-sliced-vbi-out --try-fmt-sliced-vbi-out=<mode> set/try the sliced VBI capture/output format to <mode> [VIDIOC_S/TRY_FMT], <mode> is a comma separated list of: off: turn off sliced VBI (cannot be combined with other modes) teletext: teletext (PAL/SECAM) cc: closed caption (NTSC) wss: widescreen signal (PAL/SECAM) vps: VPS (PAL/SECAM) --get-fmt-vbi query the VBI capture format [VIDIOC_G_FMT] --get-fmt-vbi-out query the VBI output format [VIDIOC_G_FMT] Selection/Cropping options: --get-cropcap query the crop capabilities [VIDIOC_CROPCAP] --get-crop query the video capture crop window [VIDIOC_G_CROP] --set-crop=top=<x>,left=<y>,width=<w>,height=<h> set the video capture crop window [VIDIOC_S_CROP] --get-cropcap-output query crop capabilities for video output [VIDIOC_CROPCAP] --get-crop-output query the video output crop window [VIDIOC_G_CROP] --set-crop-output=top=<x>,left=<y>,width=<w>,height=<h> set the video output crop window [VIDIOC_S_CROP] --get-cropcap-overlay query crop capabilities for video overlay [VIDIOC_CROPCAP] --get-crop-overlay query the video overlay crop window [VIDIOC_G_CROP] --set-crop-overlay=top=<x>,left=<y>,width=<w>,height=<h> set the video overlay crop window [VIDIOC_S_CROP] --get-cropcap-output-overlay query the crop capabilities for video output overlays [VIDIOC_CROPCAP] --get-crop-output-overlay query the video output overlay crop window [VIDIOC_G_CROP] --set-crop-output-overlay=top=<x>,left=<y>,width=<w>,height=<h> set the video output overlay crop window [VIDIOC_S_CROP] --get-selection=target=<target> query the video capture selection rectangle [VIDIOC_G_SELECTION] See --set-selection command for the valid <target> values. --set-selection=target=<target>,flags=<flags>,top=<x>,left=<y>,width=<w>,height=<h> set the video capture selection rectangle [VIDIOC_S_SELECTION] target=crop|crop_bounds|crop_default|compose|compose_bounds| compose_default|compose_padded flags=le|ge --get-selection-output=target=<target> query the video output selection rectangle [VIDIOC_G_SELECTION] See --set-selection command for the valid <target> values. --set-selection-output=target=<target>,flags=<flags>,top=<x>,left=<y>,width=<w>,height=<h> set the video output selection rectangle [VIDIOC_S_SELECTION] See --set-selection command for the arguments. Miscellaneous options: --wait-for-event=<event> wait for an event [VIDIOC_DQEVENT] <event> is the event number or one of: eos, vsync, ctrl=<id>, frame_sync where <id> is the name of the control --poll-for-event=<event> poll for an event [VIDIOC_DQEVENT] see --wait-for-event for possible events -P, --get-parm display video parameters [VIDIOC_G_PARM] -p, --set-parm=<fps> set video framerate in <fps> [VIDIOC_S_PARM] --get-output-parm display output video parameters [VIDIOC_G_PARM] --set-output-parm=<fps> set output video framerate in <fps> [VIDIOC_S_PARM] --get-jpeg-comp query the JPEG compression [VIDIOC_G_JPEGCOMP] --set-jpeg-comp=quality=<q>,markers=<markers>,comment=<c>,app<n>=<a> set the JPEG compression [VIDIOC_S_JPEGCOMP] <n> is the app segment: 0-9/a-f, <a> is the actual string. <markers> is a colon separated list of: dht: Define Huffman Tables dqt: Define Quantization Tables dri: Define Restart Interval --encoder-cmd=cmd=<cmd>,flags=<flags> Send a command to the encoder [VIDIOC_ENCODER_CMD] cmd=start|stop|pause|resume flags=stop_at_gop_end --try-encoder-cmd=cmd=<cmd>,flags=<flags> Try an encoder command [VIDIOC_TRY_ENCODER_CMD] See --encoder-cmd for the arguments. --decoder-cmd=cmd=<cmd>,flags=<flags>,stop_pts=<pts>,start_speed=<speed>, start_format=<none|gop> Send a command to the decoder [VIDIOC_DECODER_CMD] cmd=start|stop|pause|resume flags=start_mute_audio|pause_to_black|stop_to_black| stop_immediately --try-decoder-cmd=cmd=<cmd>,flags=<flags> Try a decoder command [VIDIOC_TRY_DECODER_CMD] See --decoder-cmd for the arguments. Video Streaming options: --stream-count=<count> stream <count> buffers. The default is to keep streaming forever. This count does not include the number of initial skipped buffers as is passed by --stream-skip. --stream-skip=<count> skip the first <count> buffers. The default is 0. --stream-to=<file> stream to this file. The default is to discard the data. If <file> is '-', then the data is written to stdout and the --silent option is turned on automatically. --stream-poll use non-blocking mode and select() to stream. --stream-mmap=<count> capture video using mmap() [VIDIOC_(D)QBUF] count: the number of buffers to allocate. The default is 3. --stream-user=<count> capture video using user pointers [VIDIOC_(D)QBUF] count: the number of buffers to allocate. The default is 3. --stream-from=<file> stream from this file. The default is to generate a pattern. If <file> is '-', then the data is read from stdin. --stream-loop loop when the end of the file we are streaming from is reached. The default is to stop. --stream-pattern=<count> choose output pattern. The default is 0. --stream-out-mmap=<count> output video using mmap() [VIDIOC_(D)QBUF] count: the number of buffers to allocate. The default is 3. --stream-out-user=<count> output video using user pointers [VIDIOC_(D)QBUF] count: the number of buffers to allocate. The default is 3. --list-buffers list all video buffers [VIDIOC_QUERYBUF] --list-buffers-out list all video output buffers [VIDIOC_QUERYBUF] --list-buffers-vbi list all VBI buffers [VIDIOC_QUERYBUF] --list-buffers-vbi-out list all VBI output buffers [VIDIOC_QUERYBUF] --list-buffers-sliced-vbi list all sliced VBI buffers [VIDIOC_QUERYBUF] --list-buffers-sliced-vbi-out list all sliced VBI output buffers [VIDIOC_QUERYBUF] |
$ v4l2-ctl --list-devices mmal service 16.1 (platform:bcm2835-v4l2): /dev/video0 |
$ v4l2-ctl -D Driver Info (not using libv4l2): Driver name : bm2835 mmal Card type : mmal service 16.1 Bus info : platform:bcm2835-v4l2 Driver version: 4.1.6 Capabilities : 0x85200005 Video Capture Video Overlay Read/Write Streaming Device Capabilities Device Caps : 0x05200005 Video Capture Video Overlay Read/Write Streaming |
$ v4l2-ctl --get-fmt-video Format Video Capture: Width/Height : 1920/1088 Pixel Format : 'H264' Field : None Bytes per Line: 0 Size Image : 2088960 Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601) Custom Info : feedcafe |
$ v4l2-ctl --list-formats ioctl: VIDIOC_ENUM_FMT Index : 0 Type : Video Capture Pixel Format: 'YU12' Name : 4:2:0, planar, YUV Index : 1 Type : Video Capture Pixel Format: 'YUYV' Name : 4:2:2, packed, YUYV Index : 2 Type : Video Capture Pixel Format: 'RGB3' Name : RGB24 (LE) Index : 3 Type : Video Capture Pixel Format: 'JPEG' (compressed) Name : JPEG Index : 4 Type : Video Capture Pixel Format: 'H264' (compressed) Name : H264 Index : 5 Type : Video Capture Pixel Format: 'MJPG' (compressed) Name : MJPEG Index : 6 Type : Video Capture Pixel Format: 'YVYU' Name : 4:2:2, packed, YVYU Index : 7 Type : Video Capture Pixel Format: 'VYUY' Name : 4:2:2, packed, VYUY Index : 8 Type : Video Capture Pixel Format: 'UYVY' Name : 4:2:2, packed, UYVY Index : 9 Type : Video Capture Pixel Format: 'NV12' Name : 4:2:0, planar, NV12 Index : 10 Type : Video Capture Pixel Format: 'BGR3' Name : RGB24 (BE) Index : 11 Type : Video Capture Pixel Format: 'YV12' Name : 4:2:0, planar, YVU Index : 12 Type : Video Capture Pixel Format: 'NV21' Name : 4:2:0, planar, NV21 Index : 13 Type : Video Capture Pixel Format: 'BGR4' Name : RGB32 (BE) |
$ v4l2-ctl -L User Controls brightness (int) : min=0 max=100 step=1 default=50 value=50 flags=slider contrast (int) : min=-100 max=100 step=1 default=0 value=0 flags=slider saturation (int) : min=-100 max=100 step=1 default=0 value=0 flags=slider red_balance (int) : min=1 max=7999 step=1 default=1000 value=1000 flags=slider blue_balance (int) : min=1 max=7999 step=1 default=1000 value=1000 flags=slider horizontal_flip (bool) : default=0 value=0 vertical_flip (bool) : default=0 value=0 power_line_frequency (menu) : min=0 max=3 default=1 value=1 0: Disabled 1: 50 Hz 2: 60 Hz 3: Auto sharpness (int) : min=-100 max=100 step=1 default=0 value=0 flags=slider color_effects (menu) : min=0 max=15 default=0 value=0 0: None 1: Black & White 2: Sepia 3: Negative 4: Emboss 5: Sketch 6: Sky Blue 7: Grass Green 8: Skin Whiten 9: Vivid 10: Aqua 11: Art Freeze 12: Silhouette 13: Solarization 14: Antique 15: Set Cb/Cr rotate (int) : min=0 max=360 step=90 default=0 value=0 color_effects_cbcr (int) : min=0 max=65535 step=1 default=32896 value=32896 Codec Controls video_bitrate_mode (menu) : min=0 max=1 default=0 value=0 flags=update 0: Variable Bitrate 1: Constant Bitrate video_bitrate (int) : min=25000 max=25000000 step=25000 default=10000000 value=10000000 repeat_sequence_header (bool) : default=0 value=0 h264_i_frame_period (int) : min=0 max=2147483647 step=1 default=60 value=60 h264_level (menu) : min=0 max=11 default=11 value=11 0: 1 1: 1b 2: 1.1 3: 1.2 4: 1.3 5: 2 6: 2.1 7: 2.2 8: 3 9: 3.1 10: 3.2 11: 4 h264_profile (menu) : min=0 max=4 default=4 value=4 0: Baseline 1: Constrained Baseline 2: Main 4: High Camera Controls auto_exposure (menu) : min=0 max=3 default=0 value=0 0: Auto Mode 1: Manual Mode exposure_time_absolute (int) : min=1 max=10000 step=1 default=1000 value=1000 exposure_dynamic_framerate (bool) : default=0 value=0 auto_exposure_bias (intmenu): min=0 max=24 default=12 value=12 0: -4000 (0xfffffffffffff060) 1: -3667 (0xfffffffffffff1ad) 2: -3333 (0xfffffffffffff2fb) 3: -3000 (0xfffffffffffff448) 4: -2667 (0xfffffffffffff595) 5: -2333 (0xfffffffffffff6e3) 6: -2000 (0xfffffffffffff830) 7: -1667 (0xfffffffffffff97d) 8: -1333 (0xfffffffffffffacb) 9: -1000 (0xfffffffffffffc18) 10: -667 (0xfffffffffffffd65) 11: -333 (0xfffffffffffffeb3) 12: 0 (0x0) 13: 333 (0x14d) 14: 667 (0x29b) 15: 1000 (0x3e8) 16: 1333 (0x535) 17: 1667 (0x683) 18: 2000 (0x7d0) 19: 2333 (0x91d) 20: 2667 (0xa6b) 21: 3000 (0xbb8) 22: 3333 (0xd05) 23: 3667 (0xe53) 24: 4000 (0xfa0) white_balance_auto_preset (menu) : min=0 max=9 default=1 value=1 0: Manual 1: Auto 2: Incandescent 3: Fluorescent 4: Fluorescent H 5: Horizon 6: Daylight 7: Flash 8: Cloudy 9: Shade image_stabilization (bool) : default=0 value=0 iso_sensitivity (intmenu): min=0 max=4 default=0 value=0 0: 0 (0x0) 1: 100 (0x64) 2: 200 (0xc8) 3: 400 (0x190) 4: 800 (0x320) exposure_metering_mode (menu) : min=0 max=2 default=0 value=0 0: Average 1: Center Weighted 2: Spot scene_mode (menu) : min=0 max=13 default=0 value=0 0: None 8: Night 11: Sports JPEG Compression Controls compression_quality (int) : min=1 max=100 step=1 default=30 value=30 |
$ v4l2-ctl --get-priority Priority: 2 |
$ v4l2-ctl --set-fmt-video=width=1920,height=1080,pixelformat=4 |
2015/08/09 - [개소리 왈왈/라즈베리 파이(rpi)] - 라즈베리 파이 csi v4l
opencv 템플릿 매칭 / wiring pi PWM ing.. (0) | 2015.10.05 |
---|---|
webiopi - rpi IoT (2) | 2015.10.01 |
라즈베리 파이 2 + usb webcam + servo 2ch (2) | 2015.09.28 |
라즈베리 파이 PWM 데이터 시트 (0) | 2015.09.28 |
wiring pi PWM / c 코드 (0) | 2015.09.28 |
openCV 2.4.6 부터 Use openMP 옵션이 추가된 기분?
[링크 : https://iamsrijon.wordpress.com/./how-to-compile-opencv-to-utilize-multiple-core-processor-in-linux/]
[링크 : http://answers.opencv.org/question/20955/enabling-openmp-while-building-opencv-libraries/]
결국은. 또 다시 크로스 컴파일이거나...
빌드의 시간인가!?!??
물론.. opencv2가 아닌 opencv에서도 수작업으로 병렬화는 가능한듯
[링크 : https://huseyincakir.wordpress.com/2009/11/05/using-openmp-with-opencv/]
openCV2 2.4.0 에서도 무언가 테스트는 했는데 코드가 없어서 아쉽네..
[링크 : http://museguy.tistory.com/16]
2.4.6
switched all the remaining parallel loops from TBB-only tbb::parallel_for() to universal cv::parallel_for_() with many possible backends (MS Concurrency, Apple's GDC, OpenMP, Intel TBB etc.)
2.4.3
Added universal parallel_for implementation using various backends: TBB (cross-platform: http://threadingbuildingblocks.org), OpenMP (cross-platform: http://en.wikipedia.org/wiki/OpenMP), Grand Central Dispatch (iOS/MacOSX: http://en.wikipedia.org/wiki/Grand_Central_Dispatch), Concurrency (Visual Studio 2010 or later: http://msdn.microsoft.com/en-us/library/dd492418.aspx), C= (http://www.hoopoesnest.com/cstripes/cstripes-details.htm). Many exiting parallel OpenCV algorithms have been converted to the new primitive. Therefore, you can enjoy performance improvements even without having to install TBB and ship it with OpenCV-based applications.
[링크 : http://code.opencv.org/projects/opencv/wiki/ChangeLog]
openmp 관련 정리글(win32) (0) | 2015.10.08 |
---|---|
openmp 테스트 on rpi (0) | 2015.10.06 |
openMP affinity 관련.. (0) | 2015.07.23 |
openMP parallel for private (4) | 2013.12.12 |
openMP private copyin copyprivate firstprivate lastprivate (0) | 2013.11.28 |
그냥 콘솔창에서도 사용이 가능해 보이니 돌려볼까..
[링크 : http://linuxpoison.blogspot.kr/2010/06/cppcheck-tool-for-static-c-c-code.html]
[링크 : http://cppcheck.sourceforge.net/]
[링크 : http://cppcheck.sourceforge.net/demo/]
우분투에서는 cppcheck 라는 이름으로 있군..
[링크 : http://packages.ubuntu.com/precise/devel/cppcheck]
$ sudo apt-get install cppcheck Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libtinyxml2.6.2 The following NEW packages will be installed: cppcheck libtinyxml2.6.2 0 upgraded, 2 newly installed, 0 to remove and 81 not upgraded. Need to get 604 kB of archives. After this operation, 1,466 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise/universe libtinyxml2.6.2 amd64 2 .6.2-1build1 [35.3 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/universe cppcheck amd64 1.52-1 [ 569 kB] Fetched 604 kB in 2s (225 kB/s) Selecting previously unselected package libtinyxml2.6.2. (Reading database ... 213921 files and directories currently installed.) Unpacking libtinyxml2.6.2 (from .../libtinyxml2.6.2_2.6.2-1build1_amd64.deb) ... Selecting previously unselected package cppcheck. Unpacking cppcheck (from .../cppcheck_1.52-1_amd64.deb) ... Processing triggers for man-db ... Setting up libtinyxml2.6.2 (2.6.2-1build1) ... Setting up cppcheck (1.52-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place |
Example usage: # Recursively check the current folder. Print the progress on the screen and write errors to a file: cppcheck . 2> err.txt # Recursively check ../myproject/ and don't print progress: cppcheck --quiet ../myproject/ # Check only files one.cpp and two.cpp and give all information there is: cppcheck -v -s one.cpp two.cpp # Check f.cpp and search include files from inc1/ and inc2/: cppcheck -I inc1/ -I inc2/ f.cpp For more information: |
-s를 써보라고 예제가 써있어서 해봤더니 style 체크.. 하지만 deprecated라 경고가 뜬다.
-s, --style Deprecated, please use '--enable=style' instead
의외로 경고 뿜뿜을 안해서 실망.. 복잡한 코드를 돌려봐야 하려나?
암튼. make 처럼 -j 옵션을 지원한다.
"\n" 의 cpu 점유율? (0) | 2015.10.12 |
---|---|
rand()와 RAND_MAX (0) | 2015.10.05 |
void형 포인터 ++ (0) | 2015.07.14 |
가변인자를 다시 넘겨주기 (2) | 2015.07.07 |
printf 가변인자의 비밀? (0) | 2015.06.18 |