구차니의 잡동사니 모음

에뮬레이터 배포판(?)

[링크 : http://blog.petrockblock.com/retropie/]

[링크 : http://blog.petrockblock.com/retropie/retropie-downloads/]

network-manager가 기본이긴 하나..

wpa2가 안된다고하니 wicd를 써보라는 지인의 조언...

[링크 : https://help.ubuntu.com/community/WICD]

[링크 : http://wicd.sourceforge.net/]

-> [링크 : https://launchpad.net/wicd]

+

UI만 바뀌지 그게 그거인 기분..

어짜피 안 잡힐놈은 안 잡히는건 동일한건가..

될려나.. 나중에 해봐야지

LANG="ko_KR.eucKR"

SUPPORTED="en_US.UTF-8:en_US:en:ko_KR.eucKR:ko_KR:ko"

SYSFONT="lat0-sun16"

SYSFONTACM="8859-15"

[링크 : http://compeople.tistory.com/68]

/etc/sysconfig/i18n

LANG="en_US.UTF-8" 

SUPPORTED="en_US.UTF-8:en_US:en" 

SYSFONT="latarcyrheb-sun16"

[링크 : https://www.centos.org/docs/5/html/5.1/Deployment_Guide/s2-sysconfig-i18n.html]

LANG="ko_KR.UTF-8"

SYSFONT="latarcyrheb-sun16"

[링크 : http://iwithjoy.tistory.com/entry/CentOS-ssh-접속-한글깨짐-수정]

+

$ ls -al /usr/share/consolefonts

$ vi /etc/default/console-setup

# Valid font faces are: VGA (sizes 8, 14 and 16), Terminus (sizes

# 12x6, 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBold (sizes

# 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBoldVGA (sizes 14

# and 16) and Fixed (sizes 13, 14, 15, 16 and 18).  Only when

# CODESET=Ethiopian: Goha (sizes 12, 14 and 16) and

# GohaClassic (sizes 12, 14 and 16).

# Set FONTFACE and FONTSIZE to empty strings if you want setupcon to

# set up the keyboard but to leave the console font unchanged.

FONTFACE="Fixed"

FONTSIZE="16"

# You can also directly specify nonstandard font or console map to load.

# Use space as separator if you want to load more than one font.

# You can use FONT_MAP in order to specify the Unicode map of the font

# in case the font doesn't have it embedded.

# FONT='lat9w-08.psf.gz brl-8x8.psf'

# FONT_MAP=/usr/share/consoletrans/lat9u.uni

# CONSOLE_MAP=/usr/local/share/consoletrans/my_special_encoding.acm

# You can also specify a screen size that setupcon will enforce.  This can not

# exceed what the current screen resolution can display according to the size of

# the loaded font.

#

# SCREEN_WIDTH=80

# SCREEN_HEIGHT=25

[링크 : http://unix.stackexchange.com/questions/30855/how-to-list-console-and-kernel-fonts]

부디.. 67mm 컨버터 링에 맞길 ㅠㅠ

(무려 해외주문인데 ㅠㅠ)

이게 정상적으로 작동하면.. sx50hs가 50배에서 100배! ㄷㄷㄷ

[링크 : http://itempage3.auction.co.kr/DetailView.aspx?ItemNo=A963806614]

출근길에 잠시 켜서 잡아 봤는데..

켜지는데 한 45초?

여전히 터치는 날뛰어서 쓰기 힘들고

그나마.. ctrl-alt-f6 ctrl-alt-f7을 통해 터미널 변경하면 마우스는 다시 진정하니

약간은 우회가 가능한 수준..

그래도 드래그는 못하니 무리무리..

예전에 막 죽어나가던 녀석을 포맷해서 해보니 10개도 잡긴한데..

드라이버 문제일것 같지만..

2014/12/26 - [개소리 왈왈/컴퓨터 / 노트북] - umid mbook m1 무선랜 .. 윈도우 XP용 드라이버가 문제인가?

[링크 : http://www.marvell.com/wireless/assets/8686.pdf]

+ 수동으로 opengalax 설치 모니터 터치 됨

- 터치 좌표 날뜀, 드래그는 실질적 불가

- 날뛸때는 터미널 바꾸었다 돌아오면 복구는 가능

- wifi가 잘 안됨(내장 / 버팔로 외장 모두) 리눅스 드라이버 문제인가...

+ add

[링크 : https://wikidevi.com/wiki/Wireless_adapters/Chipset_table]

[링크 : https://wireless.wiki.kernel.org/en/users/Drivers/libertas]

 -> [링크 : http://linuxwireless.sipsolutions.net/en/users/Drivers/libertas/]

+

- 무선랜 marvell sd8686 sdio 칩셋 설치 방법 : /lib/firmware/sd8686.bin과 sd8686_helper.bin 파일이 있어야 하는데... sudo apt-get install firmware-libertas 로 설치해주면 suspend 모드만 빼고는 잘 작동한다.

[링크 : http://cafe.naver.com/umid/16190]

+ wli-uc-gnm 관련(버팔로 usb)

sudo apt-get install firmware-ralink

[링크 : http://dogwood.skr.jp/blog/2013/06/46/]

[링크 : https://wiki.debian.org/rt2800usb]

[링크 : https://help.ubuntu.com/community/HardwareSupportComponentsWirelessNetworkCardsBuffalo]

+

추가(독점)드라이버 사용하도록 해주어야 한다

[링크 : http://installion.co.uk/debian/wheezy/nonfree/f/firmware-ralink/install/index.html]

우분누 15.10(wily) 부터는 삭제 된 듯

[링크 : http://www.ubuntuupdates.org/package/core/wily/main/proposed/linux-firmware]

[링크 : https://launchpad.net/ubuntu/wily/+source/libertas-firmware]

[링크 : http://installion.co.uk/debian/wheezy/nonfree/f/firmware-ralink/install/index.html]

먼가 안 맞나..

linux-firmware 라는 패키지에 설치되어 있다고 에러가 발생한다

안되는건 마찬가지 ㅠㅠ

lubuntu 에서 openbox를 채용하고 있는지 모르겠지만

윈도매니저에서의 단축키 찾는중..

Openbox default key combinations

Alt-F4 Close the active window

Alt-Space Show the client menu for the active window

Alt-Tab Cycle between windows on the desktop

Alt-Shift-Tab Cycle between windows on the desktop in reverse order

Control-Alt-Tab Cycle between panel and desktop windows on the desktop

Windows-D Hide all windows to show the desktop

Windows-E Run the Konqueror file manager (This is an example of how to run a program with a key binding)

Alt-Escape Lower the active window behind other windows, and activate the last window that was in use

Windows-F1 Go to the first desktop instantly

Windows-F2 Go to the second desktop instantly

Windows-F3 Go to the third desktop instantly

Windows-F4 Go to the fourth desktop instantly

Control-Alt-Left Open the desktop switching dialog, to go to the desktop to the left of the current one

Control-Alt-RightOpen the desktop switching dialog, to go to the desktop to the right of the current one

Control-Alt-Up Open the desktop switching dialog, to go to the desktop above the current one (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Control-Alt-Down Open the desktop switching dialog, to go to the desktop below the current one (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Shift-Alt-Left Open the desktop switching dialog, to go to the desktop to the left of the current one, and bring the active window with you

Shift-Alt-Right Open the desktop switching dialog, to go to the desktop to the right of the current one, and bring the active window with you

Shift-Alt-Up Open the desktop switching dialog, to go to the desktop above the current one, and bring the active window with you (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Shift-Alt-Down Open the desktop switching dialog, to go to the desktop below the current one, and bring the active window with you (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Alt-Left mouse button Move a window

Alt-Right mouse button Resize a window. The window is resized towards the edge that the mouse is nearest to. So use Alt-Right mouse button in the top right corner of a window to resize that corner.

Alt-Scroll wheel Change desktops forward and backward

[링크 : https://wiki.debian.org/Openbox#Keyboard_shortcuts]

그래서.. TED 라던가..

각종 플러그 인들이 요 근래부터 설치가 안된걸려나?

Published: Sunday, 01 November 2015 23:21

The OpenELEC team is proud to announce OpenELEC 6.0 (6.0.0)

The most visible change is Kodi 15.2 (Isengard). Beginning with Kodi 15.0 most audio encoder, audio decoder, PVR and visualisation addons are no longer pre-bundled into OpenELEC but can be downloaded from the Kodi addon repo if required. PVR backends such as VDR and TVHeadend will install needed dependencies automatically. For further information on Kodi 15.1 please read http://kodi.tv/kodi-15-2-isengard-final-release/.

[링크 : http://openelec.tv/news/22-releases/172-release-openelec-6-0-released]

언어 추가 설치 부터 되는게 없네 -_-

수동으로 zip 파일 받아서 addon 설치 하듯 해야 한다 -_-

xterm은 설정이 되고

리부팅 이후에는 lxterm도 적용은 되나.. 클릭이나 드래그로는 안되서

우클릭을 해야 이전 페이지로 갈수 있다는건... 설정을 잘못한걸려나?

[링크 : http://www.aboutlinux.info/2005/10/configuring-xterm-in-linux.html]

[링크 : https://wiki.archlinux.org/index.php/Xterm]

흐음.. 이게 그나마 가장 자세한데.. 영안되네 ㅠㅠ

[링크 : http://beforewisdom.com/blog/tech/xterm-with-a-scrollbar/]

---

걍 lxterminal을 쓰자 ㅋㅋㅋ

ctrl-shift-t로 단축키

[링크 : http://askubuntu.com/questions/95435/term-xterm-or-uxterm]

흐음.. lubuntu 15.10에 하려니 영 안되네...

그냥 구버전의 opengalax를 설치 하고 기존의 설정값을 쓰는걸로 해결..

$ sudo ./setup.sh

(*) Driver installer for touch controller

(*) Script Version = 1.04.5701

(I) Check user permission: root, you are the supervisor.

(I) Platform application binary interface = i686

(W) X server detected.

Declaration and Disclaimer

The programs, including but not limited to software and/or firmware (hereinafter referred to "Programs" or "PROGRAMS", are owned by eGalax_eMPIA Technology Inc. (hereinafter referred to EETI) and are compiled from EETI Source code. EETI hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use and create derivative works of Programs for the sole purpose in conjunction with an EETI Product, including but not limited to integrated circuit and/or controller. Any reproduction, copies, modification, translation, compilation, application, or representation of Programs except as specified above is prohibited without the express written permission by EETI.

Disclaimer: EETI MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO PROGRAMS, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. EETI reserves the right to make changes without further notice to the Programs described herein. Licensee agrees that EETI does not assume any liability, damages or costs, including but not limited to attorney fees, arising out from Programs themselves or those arising out from the application or combination Programs into other products or circuit. The use or the inclusion of EETI's Programs implies that the Licensee assumes all risk of such use and in doing so indemnifies EETI against all charges, including but not limited to any claims to infringement of any third party's intellectual property right.

Do you agree with above patent declaration?

 [Y] Yes, I agree.  [N] No, I don't agree.

Y

(Q) Which interface controller do you use?

(I) [1] RS232 [2] USB [3] PS2 : 3

(I) Please confirm the touch controller is linked with your device. Press [Enter] key to continue..........

(I) /etc/rcS.d path found.

ln: failed to create symbolic link `/etc/rcS.d/S99eGTouch': 파일이 있습니다

(I) Module serio_raw.ko is detected under lsmod

(I) Configure PS/2 aux driver.

(I) Found /serio_raw/ located under /sys/bus/serio/devices/serio4/

(I) Found uinput at path /dev/uinput

(I) Place eGTouch driver archive to /usr/local/eGTouch32withX.

(I) Create eGTouch daemon shortcut in /usr/bin.

(I) Create eGTouchU tool shortcut in /usr/bin.

(I) Create eCalib tool shortcut in /usr/bin.

(Q) How many controllers do you want to plug-in to system? [1-10]

(I) Default [1]:1

1

(I) Device Nums is set to 1

(W) Found udev rule: 52-egalax-virtual.conf.

(I) Create eGTouchU shortcut in application list.

(I) Driver installation completed. Setup version 1.04.5701.

(I) Please reboot the system.

[링크 : http://pof.eslack.org/2012/06/18/ubuntu-12-04-on-onkyo-bx407a4/]

[링크 : http://home.eeti.com.tw/drivers_Linux.html]

크아아아앙!!!

한것도 없는데 또 하루가 지나버렸... OTL

mbook 이나 리눅스깔고 장난치고..

tc1100 이나 win7이나 언넝 깔아야지 ㅠㅠ