질문 올렸다가 누군가의 댓글에 3.5파이 4극이냐고
어.. 찾아보니 이런 사례도 있었나 보다. 집에가서 해봐야겠네
'2026/09'에 해당되는 글 63건
- 2026.09.08 피아노 55잭에 소리가 작아!
- 2026.09.08 luckfox pico mini - ubuntu 이미지, 윈도우에서 굽기
- 2026.09.08 luckfox pico plus update on linux
- 2026.09.08 CY7C68013A 입력 전압범위
- 2026.09.07 CY7C68013A on linux
- 2026.09.07 sigrok(pulseview) + CY7C68013A
- 2026.09.07 espeak-ng TTS
- 2026.09.07 festival lite TTS
- 2026.09.07 luckfox pico plus
- 2026.09.06 주말도 피곤
모종의 음모/midi 피아노2026. 9. 8. 12:21
embeded/luckfox2026. 9. 8. 11:54
아래 링크 따라해봄
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Plus-Mini/Flash-image]
soc toolkit은 관리자 권한으로 실행해야지 usb disk를 찾는다. 머냐.. 찜찜하게
ubuntu...zip 을 압축 풀고 update.img를 제외하고 전부 선택하면 된다.
| DDR 306b9977f5 wesley.yao 23/12/21-09:28:37,fwver: v1.15 S5P1 4x fc27 rgef0 rgef1 DDRConf1 DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Size=64MB 528MHz DDR bin out U-Boot SPL board init U-Boot SPL 2017.09 (Jun 26 2025 - 11:26:17) Trying to boot from MMC2 ENVF: Primary 0x00000000 - 0x00008000 ENVF: Primary 0x00000000 - 0x00008000 No misc partition Trying fit image at 0x440 sector ## Verified-boot: 0 ## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(155eb2eff5...) + sha256(39851d494f...) + OK ## Checking fdt 0x00260998 ... sha256(9f596c5683...) + OK Total: 428.120/510.978 ms Jumping to U-Boot(0x00200000) U-Boot 2017.09 (Mar 13 2025 - 22:07:02 +0800) Model: Rockchip RV1106 EVB Board MPIDR: 0xf00 PreSerial: 2, raw, 0xff4c0000 DRAM: 64 MiB Sysmem: init Relocation Offset: 03d81000 Relocation fdt: 02dfa778 - 02dfede0 CR: M/C/I Using default environment no mmc device at slot 1 ENVF: Primary 0x00000000 - 0x00008000 ENVF: Primary 0x00000000 - 0x00008000 mmc@ffa90000: 0, mmc@ffaa0000: 1 (SD) Bootdev(atags): mmc 1 MMC1: Legacy, 52Mhz PartType: ENV DM: v2 No misc partition boot mode: None RESC: 'boot', blk@0x00001db6 resource: sha256+ FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK Model: Luckfox Pico Mini ## retrieving sd_update.txt ... bad MBR sector signature 0x0000 ** Invalid partition 1 ** CLK: (uboot. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz aclk_peri_root 400000 KHz hclK_peri_root 200000 KHz pclk_peri_root 100000 KHz aclk_bus_root 300000 KHz pclk_top_root 100000 KHz pclk_pmu_root 100000 KHz hclk_pmu_root 200000 KHz No misc partition Net: eth0: ethernet@ffa80000 Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image at 0x290ab40 with size 0x002eec00 Fdt Ramdisk skip relocation No misc partition ## Loading kernel from FIT Image at 0290ab40 ... Using 'conf' configuration ## Verified-boot: 0 Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x02914140 Data Size: 3036240 Bytes = 2.9 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: sha256 Hash value: 771db266e47561fe03689039c5f37c245966055ca6c4b8626f8bbcb5a287d0c5 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 0290ab40 ... Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x0290b340 Data Size: 36058 Bytes = 35.2 KiB Architecture: ARM Load Address: 0x00c00000 Hash algo: sha256 Hash value: ec878326be328d02cf921dd47e26715622d000bcf412e78c8a936ec0f5bb3285 Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x0290ab40 to 0x00c00000 Booting using the fdt blob at 0x00c00000 Loading Kernel Image from 0x02914140 to 0x00008000 ... OK kernel loaded at 0x00008000, end = 0x002ed450 Using Device Tree in place at 00c00000, end 00c0bcd9 Adding bank: 0x00000000 - 0x04000000 (size: 0x04000000) Total: 937.378/1453.452 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.160 (root@DESKTOP-RUMO6US) (arm-rockchip830-linux-uclibcgnueabihf-gcc (crosstool-NG 1.24.0) 8.3.0, GNU ld (crosstool-NG 1.24.05 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Luckfox Pico Mini [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 1024 KiB at 0x03f00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: user_debug=31 storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal rootwait earlycon=uart8250,mmio32,0xff4c05 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 57176K/65536K available (3793K kernel code, 379K rwdata, 1816K rodata, 196K init, 138K bss, 7336K reserved, 1024K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000018] Switching to timer-based delay loop, resolution 41ns [ 0.000513] Console: colour dummy device 80x30 [ 0.000565] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000581] pid_max: default: 4096 minimum: 301 [ 0.000758] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000772] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001422] CPU: Testing write buffer coherency: ok [ 0.002107] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.002584] devtmpfs: initialized [ 0.009512] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.009709] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009729] futex hash table entries: 16 (order: -5, 192 bytes, linear) [ 0.009866] pinctrl core: initialized pinctrl subsystem [ 0.011124] NET: Registered protocol family 16 [ 0.011568] DMA: failed to allocate 0 KiB pool for atomic coherent allocation [ 0.012163] Registered FIQ tty driver [ 0.012504] thermal_sys: Registered thermal governor 'step_wise' [ 0.012511] thermal_sys: Registered thermal governor 'user_space' [ 0.012752] cpuidle: using governor menu [ 0.026002] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000 [ 0.026819] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000 [ 0.027620] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000 [ 0.028315] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000 [ 0.028416] rockchip-pinctrl pinctrl: probed pinctrl [ 0.038327] fiq_debugger fiq_debugger.0: IRQ uart_irq not found [ 0.038352] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 0.038642] printk: console [ttyFIQ0] enabled [ 0.038867] Registered fiq debugger ttyFIQ0 [ 0.041050] SCSI subsystem initialized [ 0.041273] usbcore: registered new interface driver usbfs [ 0.041322] usbcore: registered new interface driver hub [ 0.041372] usbcore: registered new device driver usb [ 0.041638] mc: Linux media interface: v0.10 [ 0.041677] videodev: Linux video capture interface: v2.00 [ 0.042883] Advanced Linux Sound Architecture Driver Initialized. [ 0.043708] rockchip-cpuinfo cpuinfo: SoC : 11031000 [ 0.043735] rockchip-cpuinfo cpuinfo: Serial : 3c6d8f8ee95e4dd0 [ 0.044129] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: probe success! [ 0.044968] clocksource: Switched to clocksource arch_sys_counter [ 0.051609] NET: Registered protocol family 2 [ 0.051855] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.052289] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.052319] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052336] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052352] TCP: Hash tables configured (established 1024 bind 1024) [ 0.052467] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.052490] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.052630] NET: Registered protocol family 1 [ 0.053300] RPC: Registered named UNIX socket transport module. [ 0.053326] RPC: Registered udp transport module. [ 0.053332] RPC: Registered tcp transport module. [ 0.053339] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.054444] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully! [ 0.055591] Initialise system trusted keyrings [ 0.055864] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.059606] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.060492] NFS: Registering the id_resolver key type [ 0.060568] Key type id_resolver registered [ 0.060579] Key type id_legacy registered [ 0.060626] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.061126] Key type asymmetric registered [ 0.061149] Asymmetric key parser 'x509' registered [ 0.061175] io scheduler mq-deadline registered [ 0.061568] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found [ 0.066562] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.066592] dma-pl330 ff420000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.067425] rockchip-pvtm ff240000.pvtm: pvtm@0 probed [ 0.067605] rockchip-pvtm ff390000.pvtm: pvtm@0 probed [ 0.067911] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 0.068472] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.074189] random: crng init done [ 0.083411] brd: module loaded [ 0.089361] loop: module loaded [ 0.091595] spi-nand spi2.0: Winbond SPI NAND was found. [ 0.091625] spi-nand spi2.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.100923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.101278] usbcore: registered new interface driver usb-storage [ 0.101472] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.101527] Mass Storage Function, version: 2009/09/11 [ 0.101541] LUN: removable file: (no medium) [ 0.101572] no file given for LUN0 [ 0.101608] udc ffb00000.usb: failed to start g_mass_storage: -22 [ 0.102147] i2c /dev entries driver [ 0.103735] i2c i2c-4: 1 i2c clients have been registered at 0x30 [ 0.104130] i2c i2c-4: 2 i2c clients have been registered at 0x30 [ 0.105229] usbcore: registered new interface driver uvcvideo [ 0.105247] USB Video Class driver (1.1.1) Welcome to Ubuntu 22.04.3 LTS! [ 0.106016] cpu cpu0: leakage=15 [ 0.106800] cpu cpu0: avs=0 [ 0.106970] cpu cpu0: opp calibration done [ 0.107130] cpu cpu0: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 [ 0.107595] Synopsys Designware Multimedia Card Interface Driver [ 0.108510] dtbocfg: 0.1.0 [ 0.108583] dtbocfg: OK [ 0.110069] dwmmc_rockchip ffaa0000.mmc: No normal pinctrl state [ 0.110100] dwmmc_rockchip ffaa0000.mmc: No idle pinctrl state [ 0.110362] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode. [ 0.110415] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller. [ 0.110435] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a [ 0.110481] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 48,32 bit host data width,256 deep fifo [ 0.112245] rv1106-acodec ff480000.acodec: current soc_id: rv1103 [ 0.112355] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_ms: 0 [ 0.114188] NET: Registered protocol family 17 [ 0.114339] Key type dns_resolver registered [ 0.115458] Loading compiled-in X.509 certificates [ 0.131919] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.143640] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 0.199077] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0) [ 0.199234] mmc1: new high speed SDHC card at address aaaa [ 0.200185] mmcblk1: mmc1:aaaa SL08G 7.40 GiB [ 0.201223] mmcblk1: p1(env) p2(idblock) p3(uboot) p4(boot) p5(oem) p6(userdata) p7(rootfs) [ 0.228638] ALSA device list: [ 0.228673] #0: rv-acodec [ 0.242141] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null) [ 0.242251] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. [ 0.250194] devtmpfs: mounted [ 0.250425] Freeing unused kernel memory: 196K [ 0.250434] Kernel memory protection not selected by kernel config. [ 0.250467] Run /sbin/init as init process [ 0.736059] systemd[1]: System time before build time, advancing clock. [ 0.753328] systemd[1]: Failed to look up module alias 'autofs4': Function not implemented [ 0.773975] systemd[1]: systemd 249.11-0ubuntu3.11 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL ) [ 0.774918] systemd[1]: Detected architecture arm. [ 1.903361] systemd[1]: Queued start job for default target Graphical Interface. [ 1.908512] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 1.911295] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 1.913680] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 1.915458] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 1.916576] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 1.917599] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 1.918557] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ OK ] Reached target Local Encrypted Volumes. [ 1.919104] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Remote File Systems. [ 1.920227] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Slice Units. [ 1.920820] systemd[1]: Reached target Slice Units. [ OK ] Reached target Swaps. [ 1.921465] systemd[1]: Reached target Swaps. [ OK ] Reached target Local Verity Protected Volumes. [ 1.922135] systemd[1]: Reached target Local Verity Protected Volumes. [ OK ] Listening on Syslog Socket. [ 1.923752] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ 1.924897] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). [ 1.948168] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ OK ] Listening on Journal Socket. [ 1.949378] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on udev Control Socket. [ 1.951076] systemd[1]: Listening on Journal Socket. [ OK ] Listening on udev Kernel Socket. [ 1.953737] systemd[1]: Listening on udev Control Socket. Mounting Kernel Debug File System... [ 1.955378] systemd[1]: Listening on udev Kernel Socket. Starting Journal Service... [ 1.956719] systemd[1]: Condition check resulted in Huge Pages File System being skipped. Starting Load Kernel Module configfs... [ 1.957447] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. Starting Load Kernel Module drm... [ 1.961599] systemd[1]: Mounting Kernel Debug File System... Starting Load Kernel Module efi_pstore... [ 1.962951] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. Starting Load Kernel Module fuse... [ 1.966082] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. Starting Load Kernel Modules... [ 1.966136] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) Starting Remount Root and Kernel File Systems... [ 1.976021] systemd[1]: Starting Journal Service... Starting Coldplug All udev Devices... [ 1.986332] systemd[1]: Condition check resulted in Create List of Static Device Nodes being skipped. [ OK ] Mounted Kernel Debug File System. [ 2.003514] systemd[1]: Starting Load Kernel Module configfs... [ 2.034590] systemd[1]: Starting Load Kernel Module drm... [ OK ] Finished Load Kernel Module configfs. [ 2.065952] systemd[1]: Starting Load Kernel Module efi_pstore... [ 2.092134] systemd[1]: Starting Load Kernel Module fuse... [ 2.127047] systemd[1]: Starting Load Kernel Modules... [ 2.149059] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.180449] systemd[1]: Starting Coldplug All udev Devices... [ 2.231724] systemd[1]: Mounted Kernel Debug File System. [ 2.242669] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ OK ] Finished Load Kernel Module drm. [ 2.255396] systemd[1]: Finished Load Kernel Module configfs. [ 2.306533] systemd[1]: modprobe@drm.service: Deactivated successfully. [ OK ] Finished Load Kernel Module efi_pstore. [ 2.307823] systemd[1]: Finished Load Kernel Module drm. [ 2.310247] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ OK ] Finished Load Kernel Module fuse. [ 2.323757] systemd[1]: Finished Load Kernel Module efi_pstore. [ OK ] Finished Load Kernel Modules. [ 2.331081] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.340210] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Remount Root and Kernel File Systems. [ 2.345533] EXT4-fs (mmcblk1p7): re-mounted. Opts: (null) [ 2.351206] systemd[1]: Finished Load Kernel Modules. [ 2.375236] systemd[1]: Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... [ 2.377500] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 2.395573] systemd[1]: Mounting Kernel Configuration File System... [ 2.405844] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. Starting Load/Save Random Seed... [ 2.423654] systemd[1]: Starting Load/Save Random Seed... [ 2.455953] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 2.509363] systemd[1]: Starting Create System Users... Starting Create System Users... [ 2.562007] systemd[1]: Mounted Kernel Configuration File System. [ OK ] Mounted Kernel Configuration File System. [ 2.611546] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. Starting Load Kernel Module efi_pstore... Starting Load Kernel Module fuse... [ OK ] Finished Load Kernel Module efi_pstore. [ OK ] Found device /dev/ttyFIQ0. [ OK ] Finished Load Kernel Module fuse. [ OK ] Found device /dev/mmcblk1p6. [ OK ] Found device /dev/mmcblk1p5. [ OK ] Reached target Hardware activated USB gadget. Mounting /oem... Mounting /userdata... [ OK ] Mounted /oem. [ OK ] Mounted /userdata. [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Network Name Resolution... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Reached target System Initialization. [ OK ] Started ACPI Events Check. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily dpkg database backup timer. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Message of the Day. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Path Units. [ OK ] Reached target Timer Units. [ OK ] Listening on ACPID Listen Socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Save/Restore Sound Card State... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... [ OK ] Started Save initial kernel messages after boot. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Dispatcher daemon for systemd-networkd... Starting Authorization Manager... Starting System Logging Service... Starting User Login Management... Starting WPA supplicant... [ OK ] Finished Raise network interfaces. [ OK ] Finished Save/Restore Sound Card State. [ OK ] Reached target Sound Card. [ OK ] Started System Logging Service. [ OK ] Started WPA supplicant. [ OK ] Started Authorization Manager. Starting Modem Manager... [ OK ] Started User Login Management. [ OK ] Started Network Manager. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Network Time Service... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting vsftpd FTP server... [ OK ] Started vsftpd FTP server. [ OK ] Finished Permit User Sessions. Starting Hostname Service... [ OK ] Started Network Time Service. [ 14.188232] sc3336 4-0030: could not get default pinstate [ 14.188264] sc3336 4-0030: could not get sleep pinstate [ 15.104003] rkcif rkcif-mipi-lvds: failed to get dphy hw node [ 15.104056] : terminal subdev does not exist [ 15.104069] : terminal subdev does not exist [ 15.104077] : terminal subdev does not exist [ 15.104086] : terminal subdev does not exist [ 15.104097] : get_remote_sensor: video pad[0] is null [ 15.104108] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 15.104126] : get_remote_sensor: video pad[0] is null [ 15.104134] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 15.104149] : get_remote_sensor: video pad[0] is null [ 15.104156] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 15.104170] : get_remote_sensor: video pad[0] is null [ 15.104177] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 15.197383] rockchip-mipi-csi2: Async registered subdev [ 17.359228] rc.local[275]: 0 [ 17.563134] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_a_pp is not found! [ 17.563165] vepu_pp_init:526: No aclk reset resource define [ 17.563177] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_h_pp is not found! [ 17.563185] vepu_pp_init:529: No hclk reset resource define [ 17.703716] RKNPU ff660000.npu: dev_pm_opp_set_regulators: no regulator (rknpu) found: -19 [ 17.760752] rc.local[288]: Input rkcif-mipi-lvds Format:SBGGR10_1X10 Size:2304x1296@30fps Offset(0,0) [ 24.032674] rc.local[356]: cat: '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 24.084765] rc.local[358]: cat: '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 24.120213] rc.local[360]: cat: '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 24.146917] rc.local[362]: cat: '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 24.174028] rc.local[364]: cat: '/sys/bus/usb/devices/*/uevent': No such file or directory [ 24.207367] rc.local[366]: cat: '/sys/bus/usb/devices/*/uevent': No such file or directory [ 24.232187] rc.local[368]: cat: '/sys/bus/usb/devices/*/uevent': No such file or directory [ 24.267132] rc.local[370]: cat: '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 25.268919] rc.local[350]: wlan0 not found. Stop run rkwifi_server. [ 25.354028] rc.local[384]: resize2fs 1.46.5 (30-Dec-2021) [ 26.336900] rc.local[384]: Filesystem at /dev/mmcblk1p5 is mounted on /oem; on-line resizing required [ 26.338154] rc.local[384]: old_desc_blocks = 1, new_desc_blocks = 1 [ 26.339087] rc.local[384]: The filesystem on /dev/mmcblk1p5 is now 131072 (4k) blocks long. [ 26.654170] rc.local[395]: resize2fs 1.46.5 (30-Dec-2021) [ 31.106295] rc.local[395]: Filesystem at /dev/mmcblk1p6 is mounted on /userdata; on-line resizing required [ 31.110425] rc.local[395]: old_desc_blocks = 1, new_desc_blocks = 1 [ 31.118636] rc.local[395]: The filesystem on /dev/mmcblk1p6 is now 262144 (1k) blocks long. [ 31.269909] rc.local[404]: resize2fs 1.46.5 (30-Dec-2021) [ 36.048860] rc.local[404]: Filesystem at /dev/mmcblk1p7 is mounted on /; on-line resizing required [ 36.074125] rc.local[404]: old_desc_blocks = 1, new_desc_blocks = 1 [ 36.075627] rc.local[404]: The filesystem on /dev/mmcblk1p7 is now 1572864 (4k) blocks long. [ 36.826968] rc.local[352]: Filesystem resized successfully. [ 38.315487] rc.local[352]: Swap successfully. [ 38.649020] rc.local[189]: /etc/rc.local: line 24: warning: command substitution: ignored null byte in input [ 38.701204] rc.local[473]: Debug: configfs_init [ 50.244421] rc.local[520]: /usr/bin/luckfox-config: line 234: warning: command substitution: ignored null byte in input [ 52.294743] rc.local[520]: Only Luckfox Pico Ultra /Luckfox Pico Ultra W support RGB [ 53.907365] rc.local[520]: Complete configuration loading [ 53.976024] rc.local[775]: hwclock: Cannot access the Hardware Clock via any known method. [ 53.979581] rc.local[775]: hwclock: Use the --verbose option to see the details of our search for an access method. Ubuntu 22.04.3 LTS luckfox ttyFIQ0 [username:password] root:root pico:luckfox luckfox login: root Password: ==== ==== ======== ======== =========== =========== ==== =============== ==== ==== ========= ==== ==== ==== = = ============ ============ ================================ ====== ========== ======= ===== ======= ===== ========== === =========== ============ ============ ======= ====== ====== ===== ============ ======== ==== === === === ======= === === ========= ====== === === === === === === === === === === === === === === === === === === ====== === === === ===== === === === === ====== ========= === === ===== === === === === === === === === === === === === ========= ====== ======= === === === ====== === === Welcome to Ubuntu 22.04.3 LTS (GNU/Linux 5.10.160 armv7l) * Documentation: https://wiki.luckfox.com * Management: https://www.luckfox.com This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@luckfox:~# root@luckfox:~# ifconfig lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 loop txqueuelen 1000 (Local Loopback) RX packets 190 bytes 14100 (14.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 190 bytes 14100 (14.1 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.32.0.70 netmask 255.255.0.0 broadcast 172.32.255.255 ether 3a:91:cb:ae:12:82 txqueuelen 1000 (Ethernet) RX packets 83 bytes 14315 (14.3 KB) RX errors 0 dropped 63 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@luckfox:~# netstat -tnlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 499/adbd tcp 0 0 0.0.0.0:5555 0.0.0.0:* LISTEN 499/adbd tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 128/systemd-resolve tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 215/sshd: /usr/sbin root@luckfox:~# free -h total used free shared buff/cache available Mem: 56Mi 23Mi 4.0Mi 0.0Ki 27Mi 27Mi Swap: 1.0Gi 16Mi 1.0Gi root@luckfox:~# lsmod Module Size Used by rve 23436 0 rockit 225880 0 rknpu 27019 0 mpp_vcodec 414257 1 rockit rga3 90762 1 rockit phy_rockchip_csi2_dphy 9338 0 phy_rockchip_csi2_dphy_hw 10066 0 video_rkisp 171838 1 rockit video_rkcif 162117 1 rockit sc3336 9940 1 rk_dvbm 5941 2 mpp_vcodec,video_rkisp root@luckfox:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 5.9G 1.9G 3.8G 34% / tmpfs 29M 0 29M 0% /dev/shm tmpfs 12M 988K 11M 9% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk1p5 488M 91M 375M 20% /oem /dev/mmcblk1p6 238M 15K 233M 1% /userdata tmpfs 5.7M 0 5.7M 0% /run/user/0 |
'embeded > luckfox' 카테고리의 다른 글
| luckfox pico plus update on linux (0) | 2026.09.08 |
|---|---|
| luckfox pico plus (0) | 2026.09.07 |
| luckfox pico ultra - rknn 예제 (0) | 2026.04.27 |
| luckfox pico ultra 카메라 모션 디텍트 끄기 (0) | 2026.04.27 |
| luckfox pico ultra - rv1106 riscv (0) | 2026.04.24 |
embeded/luckfox2026. 9. 8. 11:05
머.. 실행해보니 막상 별건 없는 느낌인데
| $ ./upgrade_tool uf ../Luckfox_Pico_Plus_Flash_250607/update.img Using /home/minimonk/다운로드/my/luckfox/upgrade_tool_v2.17_for_linux/config.ini Loading firmware... Support Type:1106 FW Ver:0.0.00 FW Time:2025-06-26 11:28:18 Loader ver:1.01 Loader Time:2025-06-26 11:26:19 Start to upgrade firmware... Download Boot Start Download Boot Success Wait For Maskrom Start Wait For Maskrom Success Test Device Start Test Device Success Check Chip Start Check Chip Success Get FlashInfo Start Get FlashInfo Success Prepare IDB Start Prepare IDB Success Download IDB Start Download IDB Success Download Firmware Start Download Image... (100%) Download Firmware Success Upgrade firmware ok. |
업데이트 관련해서는 별다른 메시지는 없는것 같다.
카메라 달지 않고 업데이트 이후 부팅
| RKUART DDR 306b9977f5 wesley.yao 23/12/21-09:28:37,fwver: v1.15 S5P1 4x fc27 F DDRConf1 DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Size=64MB 528MHz DDR bin out Boot1 Release Time: Feb 6 2024 17:30:35, version: 1.09 NO FTL rom_version: 0x30303256 Boot from dev = 129 hamming_distance:1103 1106 2 chip_id:5256110300,0 ChipType = 27 0xff3e0040: 0x49 sfc nor id: ff ef aa sfc_nand id: ef aa 21 sfc_nand_density 40000 sfc_nand_density 3fc00 UsbBoot ...9656 0xff3e0040: 0x49 powerOn 14807 SoftReset, 56049DDR 306b9977f5 wesley.yao 23/12/21-09:28:37,fwver: v1.15 S5P1 4x fc27 F DDRConf1 DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Size=64MB 528MHz DDR bin out U-Boot SPL board init U-Boot SPL 2017.09 (Jun 26 2025 - 11:26:17) Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 1 MMC: no card present mmc_init: -123, time 2 spl: mmc init failed with error: -123 Trying to boot from MTD1 ENVF: Primary 0x00000000 - 0x00040000 No misc partition Trying fit image at 0x400 sector ## Verified-boot: 0 ## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(4d47532412...) + shaK ## Checking fdt 0x00261170 ... sha256(9f596c5683...) + OK Total: 134.120/215.341 ms Jumping to U-Boot(0x00200000) U-Boot 2017.09 (Jun 26 2025 - 11:26:17 +0800) Model: Rockchip RV1106 EVB Board MPIDR: 0xf00 PreSerial: 2, raw, 0xff4c0000 DRAM: 64 MiB Sysmem: init Relocation Offset: 03d80000 Relocation fdt: 02df9f58 - 02dfede8 CR: M/C/I Using default environment Bootdev(atags): mtd 1 ENVF: Primary 0x00000000 - 0x00040000 PartType: ENV DM: v2 No misc partition boot mode: normal RESC: 'boot', blk@0x00002002 resource: sha256+ FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK Model: Luckfox Pico Plus ## retrieving sd_update.txt ... MMC: no card present mmc_init: -123, time 2 CLK: (uboot. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz aclk_peri_root 400000 KHz hclK_peri_root 200000 KHz pclk_peri_root 100000 KHz aclk_bus_root 300000 KHz pclk_top_root 100000 KHz pclk_pmu_root 100000 KHz hclk_pmu_root 200000 KHz Net: eth0: ethernet@ffa80000 Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image at 0x28f8b00 with size 0x00300400 Fdt Ramdisk skip relocation No misc partition ## Loading kernel from FIT Image at 028f8b00 ... Using 'conf' configuration ## Verified-boot: 0 Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x02902100 Data Size: 3108184 Bytes = 3 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: sha256 Hash value: 0392dc0511d1bf4d71172f243b3539e9a64ec2e4bc38da8376d2c12f033f7 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 028f8b00 ... Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x028f9300 Data Size: 36148 Bytes = 35.3 KiB Architecture: ARM Load Address: 0x00c00000 Hash algo: sha256 Hash value: b1e59866e424e3ea19754e15354aa22223981fe5eba6357dbc80cb718ac6d Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x028f8b00 to 0x00c00000 Booting using the fdt blob at 0x00c00000 Loading Kernel Image from 0x02902100 to 0x00008000 ... OK kernel loaded at 0x00008000, end = 0x002fed58 Using Device Tree in place at 00c00000, end 00c0bd33 Adding bank: 0x00000000 - 0x04000000 (size: 0x04000000) Total: 590.720/811.159 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.160 (hxj@luckfox-System-Product-Name) (arm-ro5 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] OF: fdt: Machine model: Luckfox Pico Plus [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 24576 KiB at 0x02800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: user_debug=31 storagemedia=mtd androidboot.5 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, li) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, lin) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 33452K/65536K available (3879K kernel code, 390K rwdata,) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s [ 0.000020] Switching to timer-based delay loop, resolution 41ns [ 0.000520] Console: colour dummy device 80x30 [ 0.000568] Calibrating delay loop (skipped), value calculated using timer f) [ 0.000586] pid_max: default: 4096 minimum: 301 [ 0.000765] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line) [ 0.000779] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,) [ 0.001433] CPU: Testing write buffer coherency: ok [ 0.002114] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.002601] devtmpfs: initialized [ 0.009583] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 [ 0.009829] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.009861] futex hash table entries: 16 (order: -5, 192 bytes, linear) [ 0.009957] pinctrl core: initialized pinctrl subsystem [ 0.011206] NET: Registered protocol family 16 [ 0.011684] DMA: failed to allocate 0 KiB pool for atomic coherent allocation [ 0.012282] Registered FIQ tty driver [ 0.012625] thermal_sys: Registered thermal governor 'step_wise' [ 0.012631] thermal_sys: Registered thermal governor 'user_space' [ 0.012875] cpuidle: using governor menu [ 0.026579] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000 [ 0.027400] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000 [ 0.028191] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000 [ 0.028882] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000 [ 0.028985] rockchip-pinctrl pinctrl: probed pinctrl [ 0.039316] fiq_debugger fiq_debugger.0: IRQ uart_irq not found [ 0.039342] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 0.039626] printk: console [ttyFIQ0] enabled [ 0.039826] Registered fiq debugger ttyFIQ0 [ 0.041979] SCSI subsystem initialized [ 0.042213] usbcore: registered new interface driver usbfs [ 0.042275] usbcore: registered new interface driver hub [ 0.042331] usbcore: registered new device driver usb [ 0.042582] mc: Linux media interface: v0.10 [ 0.042624] videodev: Linux video capture interface: v2.00 [ 0.043859] Advanced Linux Sound Architecture Driver Initialized. [ 0.044701] rockchip-cpuinfo cpuinfo: SoC : 11031000 [ 0.044728] rockchip-cpuinfo cpuinfo: Serial : 3c6d8f8ee95e4dd0 [ 0.045128] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: prob! [ 0.045996] clocksource: Switched to clocksource arch_sys_counter [ 0.052725] NET: Registered protocol family 2 [ 0.052978] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linea) [ 0.053402] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096) [ 0.053438] TCP established hash table entries: 1024 (order: 0, 4096 bytes, ) [ 0.053457] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.053474] TCP: Hash tables configured (established 1024 bind 1024) [ 0.053589] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.053614] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.053767] NET: Registered protocol family 1 [ 0.054443] RPC: Registered named UNIX socket transport module. [ 0.054466] RPC: Registered udp transport module. [ 0.054476] RPC: Registered tcp transport module. [ 0.054482] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.055561] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully! [ 0.056753] Initialise system trusted keyrings [ 0.057084] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.060817] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.061647] NFS: Registering the id_resolver key type [ 0.061718] Key type id_resolver registered [ 0.061728] Key type id_legacy registered [ 0.061777] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.062293] Key type asymmetric registered [ 0.062317] Asymmetric key parser 'x509' registered [ 0.062343] io scheduler mq-deadline registered [ 0.062762] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found [ 0.067706] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-0 [ 0.067745] dma-pl330 ff420000.dma-controller: DBUFF-128x8bytes Num_Ch6 [ 0.068595] rockchip-pvtm ff240000.pvtm: pvtm@0 probed [ 0.068786] rockchip-pvtm ff390000.pvtm: pvtm@0 probed [ 0.069143] rockchip-system-monitor rockchip-system-monitor: system monitor e [ 0.069703] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.075497] random: crng init done [ 0.084473] brd: module loaded [ 0.090458] loop: module loaded [ 0.092715] spi-nand spi2.0: Winbond SPI NAND was found. [ 0.092744] spi-nand spi2.0: 128 MiB, block size: 128 KiB, page size: 2048, 4 [ 0.093978] 7 cmdlinepart partitions found on MTD device spi-nand0 [ 0.093998] Creating 7 MTD partitions on "spi-nand0": [ 0.094014] 0x000000000000-0x000000040000 : "env" [ 0.095926] 0x000000040000-0x000000080000 : "idblock" [ 0.097819] 0x000000080000-0x000000100000 : "uboot" [ 0.099742] 0x000000100000-0x000000500000 : "boot" [ 0.101617] 0x000000500000-0x000002300000 : "oem" [ 0.103556] 0x000002300000-0x000002900000 : "userdata" [ 0.105521] 0x000002900000-0x000007e00000 : "rootfs" [ 0.109003] rk_gmac-dwmac ffa80000.ethernet: IRQ eth_lpi not found [ 0.109201] rk_gmac-dwmac ffa80000.ethernet: PTP uses main clock [ 0.109254] rk_gmac-dwmac ffa80000.ethernet: no regulator found [ 0.109267] rk_gmac-dwmac ffa80000.ethernet: clock input or output? (input). [ 0.109278] rk_gmac-dwmac ffa80000.ethernet: Can not read property: tx_delay. [ 0.109288] rk_gmac-dwmac ffa80000.ethernet: set tx_delay to 0xffffffff [ 0.109297] rk_gmac-dwmac ffa80000.ethernet: Can not read property: rx_delay. [ 0.109307] rk_gmac-dwmac ffa80000.ethernet: set rx_delay to 0xffffffff [ 0.109392] rk_gmac-dwmac ffa80000.ethernet: integrated PHY? (yes). [ 0.109409] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_rx [ 0.109422] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_tx [ 0.109456] rk_gmac-dwmac ffa80000.ethernet: cannot get clock clk_mac_speed [ 0.109464] rk_gmac-dwmac ffa80000.ethernet: clock input from PHY [ 0.109705] rk_gmac-dwmac ffa80000.ethernet: init for RMII [ 0.109953] rk_gmac-dwmac ffa80000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.109974] rk_gmac-dwmac ffa80000.ethernet: DWMAC4/5 [ 0.109990] rk_gmac-dwmac ffa80000.ethernet: DMA HW capability register suppd [ 0.110000] rk_gmac-dwmac ffa80000.ethernet: RX Checksum Offload Engine suppd [ 0.110009] rk_gmac-dwmac ffa80000.ethernet: TX Checksum insertion supported [ 0.110016] rk_gmac-dwmac ffa80000.ethernet: Wake-Up On Lan supported [ 0.110024] rk_gmac-dwmac ffa80000.ethernet: TSO supported [ 0.110032] rk_gmac-dwmac ffa80000.ethernet: Enable RX Mitigation via HW Watr [ 0.110042] rk_gmac-dwmac ffa80000.ethernet: TSO feature enabled [ 0.110053] rk_gmac-dwmac ffa80000.ethernet: Using 40 bits DMA width [ 0.117676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.118038] usbcore: registered new interface driver usb-storage [ 0.118189] usbcore: registered new interface driver usb_ch343 [ 0.118201] ch343: USB serial driver for ch342/ch343/ch344/ch347/ch9101/ch91. [ 0.118208] ch343: V1.5 On 2022.12 [ 0.118387] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.118436] Mass Storage Function, version: 2009/09/11 [ 0.118450] LUN: removable file: (no medium) [ 0.118486] no file given for LUN0 [ 0.118525] udc ffb00000.usb: failed to start g_mass_storage: -22 [ 0.119100] i2c /dev entries driver [ 0.120736] i2c i2c-4: 1 i2c clients have been registered at 0x30 [ 0.121116] i2c i2c-4: 2 i2c clients have been registered at 0x30 [ 0.122128] usbcore: registered new interface driver uvcvideo [ 0.122145] USB Video Class driver (1.1.1) [ 0.122932] cpu cpu0: leakage=15 [ 0.123705] cpu cpu0: avs=0 [ 0.123873] cpu cpu0: opp calibration done [ 0.124052] cpu cpu0: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_t0 [ 0.124509] Synopsys Designware Multimedia Card Interface Driver [ 0.125385] dtbocfg: 0.1.0 [ 0.125442] dtbocfg: OK [ 0.127023] dwmmc_rockchip ffaa0000.mmc: No normal pinctrl state [ 0.127056] dwmmc_rockchip ffaa0000.mmc: No idle pinctrl state [ 0.127302] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode. [ 0.127356] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller. [ 0.127374] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a [ 0.127423] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 50,32 bit o [ 0.127550] mmc_host mmc1: card is non-removable. [ 0.128732] usbcore: registered new interface driver snd-usb-audio [ 0.129332] rv1106-acodec ff480000.acodec: current soc_id: rv1103 [ 0.129432] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_0 [ 0.131231] NET: Registered protocol family 17 [ 0.131347] Key type dns_resolver registered [ 0.132394] Loading compiled-in X.509 certificates [ 0.149060] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,) [ 0.160704] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 0.188173] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz,) [ 0.239332] ubi0: attaching mtd6 [ 0.248728] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz,) [ 0.295952] mmc_host mmc1: Bus speed (slot 0) = 187500Hz (slot req 100000Hz,) [ 0.376680] ubi0: scanning is finished [ 0.402041] ubi0: volume 0 ("rootfs") re-sized from 393 to 656 LEBs [ 0.402694] ubi0: attached mtd6 (name "rootfs", size 85 MiB) [ 0.402716] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.402726] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.402736] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.402745] ubi0: good PEBs: 680, bad PEBs: 0, corrupted PEBs: 0 [ 0.402754] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 0.402765] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image seq3 [ 0.402775] ubi0: available PEBs: 0, total reserved PEBs: 680, PEBs reserved0 [ 0.403967] ALSA device list: [ 0.403990] #0: rv-acodec [ 0.404649] ubi0: background thread "ubi_bgt0d" started, PID 55 [ 0.404891] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 0.448841] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rooe [ 0.448873] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O s [ 0.448888] UBIFS (ubi0:0): FS size: 81899520 bytes (78 MiB, 645 LEBs), jour) [ 0.448898] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 0.448910] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID C568l [ 0.454026] VFS: Mounted root (ubifs filesystem) readonly on device 0:14. [ 0.456236] devtmpfs: mounted [ 0.456458] Freeing unused kernel memory: 200K [ 0.456469] Kernel memory protection not selected by kernel config. [ 0.456499] Run /sbin/init as init process [ 0.479462] process '/bin/busybox' started with executable stack [ 0.607684] UBIFS (ubi0:0): start fixing up free space [ 6.267389] UBIFS (ubi0:0): free space fixup complete [ 6.276168] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 58 Saving 256 bits of creditable seed for next boot Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.498043] udevd[88]: starting version 3.2.7 [ 6.514080] udevd[88]: specified group 'input' unknown [ 6.515135] udevd[88]: specified group 'kvm' unknown [ 6.538487] udevd[89]: starting eudev-3.2.7 [ 6.930451] udevd[102]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 6.934561] udevd[103]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 6.944669] udevd[104]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 6.955273] udevd[105]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 6.960659] udevd[106]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 6.969659] udevd[107]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 6.979129] udevd[108]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y done /etc/init.d/S20linkmount info: mount point path [IGNORE] not found, skip... ***********/dev/ubi4_0 not exist*********** ***********/dev/ubi4 not exist*********** [ 7.406750] ubi4: attaching mtd4 [ 7.456924] ubi4: scanning is finished [ 7.482199] ubi4: volume 0 ("oem") re-sized from 155 to 216 LEBs [ 7.487133] ubi4: attached mtd4 (name "oem", size 30 MiB) UBI device number 4, total 240 LEBs (30474240 bytes, 29.1 MiB), available 0 LEB) [ 7.487157] ubi4: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 7.487167] ubi4: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 try to make volume: /dev/ubi4_0 ... [ 7.487177] ubi4: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 7.487186] ubi4: good PEBs: 240, bad PEBs: 0, corrupted PEBs: 0 ubimkvol: error!: bad volume size: "0" [ 7.487196] ubi4: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 7.487206] ubi4: max/mean erase counter: 1/0, WL threshold: 4096, image seq3 [ 7.487215] ubi4: available PEBs: 0, total reserved PEBs: 240, PEBs reserved0 [ 7.488560] ubi4: background thread "ubi_bgt4d" started, PID 128 [ 7.543260] UBIFS (ubi4:0): Mounting in unauthenticated mode [ 7.544115] UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 133 [ 7.566468] UBIFS (ubi4:0): start fixing up free space [ 9.904302] UBIFS (ubi4:0): free space fixup complete [ 9.921198] UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "oem" [ 9.921237] UBIFS (ubi4:0): LEB size: 126976 bytes (124 KiB), min./max. I/O s [ 9.921252] UBIFS (ubi4:0): FS size: 26157056 bytes (24 MiB, 206 LEBs), jour) [ 9.921261] UBIFS (ubi4:0): reserved for root: 0 bytes (0 KiB) [ 9.921274] UBIFS (ubi4:0): media format: w4/r0 (latest is w5/r0), UUID 4666l ***********/dev/ubi5_0 not exist*********** [ 9.959310] ubi5: attaching mtd5 ***********/dev/ubi5 not exist*********** [ 9.967838] ubi5: scanning is finished [ 9.992894] ubi5: volume 0 ("userdata") re-sized from 13 to 24 LEBs [ 9.997890] ubi5: attached mtd5 (name "userdata", size 6 MiB) UBI device number 5, total 48 LEBs (6094848 bytes, 5.8 MiB), available 0 LEBs () [ 9.997918] ubi5: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 9.997929] ubi5: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 try to make volume: /dev/ubi5_0 ... [ 9.997938] ubi5: VID header offset: 2048 (aligned 2048), data offset: 4096 ubimkvol: error!: bad volume size: "0" [ 9.997946] ubi5: good PEBs: 48, bad PEBs: 0, corrupted PEBs: 0 [ 9.997956] ubi5: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 9.997966] ubi5: max/mean erase counter: 1/0, WL threshold: 4096, image seq2 [ 9.997976] ubi5: available PEBs: 0, total reserved PEBs: 48, PEBs reserved 0 [ 10.000248] ubi5: background thread "ubi_bgt5d" started, PID 142 [ 10.039661] UBIFS (ubi5:0): Mounting in unauthenticated mode [ 10.040418] UBIFS (ubi5:0): background thread "ubifs_bgt5_0" started, PID 147 [ 10.062991] UBIFS (ubi5:0): start fixing up free space [ 10.086564] UBIFS (ubi5:0): free space fixup complete [ 10.105122] UBIFS (ubi5:0): UBIFS: mounted UBI device 5, volume 0, name "use" [ 10.105151] UBIFS (ubi5:0): LEB size: 126976 bytes (124 KiB), min./max. I/O s [ 10.105165] UBIFS (ubi5:0): FS size: 1777664 bytes (1 MiB, 14 LEBs), journal) [ 10.105173] UBIFS (ubi5:0): reserved for root: 0 bytes (0 KiB) Initializing random number generator... [ 10.105186] UBIFS (ubi5:0): media fol done. Starting network: /dev/ubi5_0 on /userdata type ubifs (rw,relatime,assert=read-) [ 10.261858] rk_dvbm ffa70000.rkdvbm: probe start [ 10.261908] rk_dvbm ffa70000.rkdvbm: dvbm ctx 6f55e22e [ 10.262480] rk_dvbm ffa70000.rkdvbm: probe success [ 10.286794] sc3336 4-0030: driver version: 00.01.01 [ 10.286887] sc3336 4-0030: Failed to get reset-gpios [ 10.286948] sc3336 4-0030: could not get default pinstate OK [ 10.286960] sc3336 4-0030: could not get sleep pinstate Starting ntpd: [ 10.286988] sc3336 4-0030: supply avdd not found, using dummyr [ 10.287259] sc3336 4-0030: supply dovdd not found, using dummy regulator [ 10.287350] sc3336 4-0030: supply dvdd not found, using dummy regulator [ 10.305436] sc3336 4-0030: Unexpected sensor id(000000), ret(-5) [ 10.378077] rkcifhw ffa10000.rkcif: no iommu attached, using non-iommu buffes [ 10.378115] rkcifhw ffa10000.rkcif: No reserved memory region assign to CIF [ 10.378540] rkcif rkcif-mipi-lvds: rkcif driver version: v00.02.00 [ 10.378665] rkcif rkcif-mipi-lvds: attach to cif hw node [ 10.378681] rkcif rkcif-mipi-lvds: failed to get dphy hw node [ 10.378691] rkcif rkcif-mipi-lvds: rkcif wait line 0 [ 10.378702] rkcif rkcif-mipi-lvds: rkcif fastboot reserve bufs num 3 [ 10.378718] : terminal subdev does not exist [ 10.378729] : terminal subdev does not exist [ 10.378737] : terminal subdev does not exist [ 10.378746] : terminal subdev does not exist [ 10.378759] : get_remote_sensor: video pad[0] is null [ 10.378769] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 10.378781] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 10.378789] : get_remote_sensor: video pad[0] is null [ 10.378796] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 10.378806] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 10.378814] : get_remote_sensor: video pad[0] is null [ 10.378822] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 10.378830] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 10.378839] : get_remote_sensor: video pad[0] is null [ 10.378845] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 10.378855] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 10.393905] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified [ 10.395203] rockchip-mipi-csi2-hw ffa20000.mipi-csi2-hw: enter mipi csi2 hw ! [ 10.395431] rockchip-mipi-csi2-hw ffa20000.mipi-csi2-hw: probe success, v4l2! [ 10.395592] rockchip-mipi-csi2-hw ffa30000.mipi-csi2-hw: enter mipi csi2 hw ! [ 10.395731] rockchip-mipi-csi2-hw ffa30000.mipi-csi2-hw: probe success, v4l2! [ 10.396315] rockchip-mipi-csi2 mipi0-csi2: attach to csi2 hw node [ 10.396392] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2! [ 10.396415] rockchip-mipi-csi2: Async registered subdev [ 10.396425] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds! [ 10.461868] rkisp_hw ffa00000.rkisp: is_thunderboot: 0 [ 10.461903] rkisp_hw ffa00000.rkisp: Missing rockchip,grf property [ 10.461953] rkisp_hw ffa00000.rkisp: max input:0x0@0fps [ 10.462134] rkisp_hw ffa00000.rkisp: get sram size:253952 [ 10.462152] rkisp_hw ffa00000.rkisp: no iommu attached, using non-iommu buffs [ 10.462163] rkisp_hw ffa00000.rkisp: No reserved memory region. default cma ! [ 10.462612] rkisp rkisp-vir0: rkisp driver version: v02.05.00 [ 10.462765] rkisp rkisp-vir0: No memory-region-thunderboot specified [ 10.464190] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was no! [ 10.497905] rockchip-csi2-dphy-hw ff3e8000.csi2-dphy-hw: csi2 dphy hw probe ! 0 [ 10.515610] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully! 0 [ 10.835646] rkcif rkcif-mipi-lvds: clear unready subdev num: 3 [ 10.837405] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote ! [ 10.837434] rkcif-mipi-lvds: Async subdev notifier completed [ 10.837460] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote ! [ 10.837469] rkcif-mipi-lvds: There is not terminal subdev, not synchronized P [ 10.837510] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote ! [ 10.837519] rkcif-mipi-lvds: There is not terminal subdev, not synchronized P [ 10.838328] rkisp rkisp-vir0: clear unready subdev num: 1 [ 10.838814] rkisp-vir0: Async subdev notifier completed [ 10.879695] rga: rga2, irq = 36, match scheduler [ 10.880987] rga: rga2 hardware loaded successfully, hw_version:3.3.87975. [ 10.881014] rga: rga2 probe successfully [ 10.881323] rga_iommu: IOMMU binding successfully, default mapping core[0x4] [ 10.883248] rga: Module initialized. v1.3.1 OK [ 11.000806] mpp_vcodec: loading out-of-tree module taints kernel. [ 11.016911] mpp_vcodec: init new [ 11.017101] mpp_service mpp-srv: 424abb9b author: Yandong Lin 2024-04-29 [mph [ 11.017118] mpp_service mpp-srv: probe start [ 11.019595] mpp_rkvenc_540c ffa50000.rkvenc: probing start [ 11.019887] mpp_rkvenc_540c ffa50000.rkvenc: probing finish [ 11.020382] mpp_vepu_pp ffa60000.rkvenc-pp: probe device [ 11.020515] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_a_pp is not found! [ 11.020528] vepu_pp_init:526: No aclk reset resource define [ 11.020537] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_h_pp is not found! Input (null) Format:SRGGB8_1X8 Size:800x600@4fps Offset(0,0) [ 11.020546] vepu_pp_init:529: No hclk reset resource define [ 11.022279] mpp_vepu_pp ffa60000.rkvenc-pp: probing finish ssh-keygen: generating new host keys: RSA [ 11.022596] mpp_service mpp-srv: ps [ 11.055309] RKNPU ff660000.npu: RKNPU: rknpu iommu device-tree entry not foue [ 11.055904] RKNPU ff660000.npu: RKNPU: Initialized RKNPU driver: v0.9.2 for 5 [ 11.056082] RKNPU ff660000.npu: dev_pm_opp_set_regulators: no regulator (rkn9 [ 11.135270] rockit_load start [ 11.169165] rockit_load end [ 11.191990] rve: rve_irq, irq = 52, match scheduler [ 11.196718] rve: Driver loaded successfully rve[2] ver:[2021]58.1a [ 11.196746] rve: probe successfully [ 11.198192] rve: Module initialized. v1.0.6 / ln: /oem/usr/www/userdata: No such file or directory ln: /oem/usr/www/usb0: No such file or directory ln: /oem/usr/www/sdcard: No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory Error: not found rkipc.ini !!! /oem/usr/bin/RkLunch.sh: exit: line 107: Illegal number: -1 cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/usb/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/usb/devices/*/uevent': No such file or directory [ 11.450841] rk_gmac-dwmac ffa80000.ethernet eth0: PHY [stmmac-0:02] driver [) [ 11.451244] dwmac4: Master AXI performs any burst length [ 11.451273] rk_gmac-dwmac ffa80000.ethernet eth0: No Safety Features supportd cat: can't open '/sys/bus/usb/devices/*/uevent': No such file or directory [ 11.451297] rk_gmac-dwmac ffa80000.ethernet eth0: PTP not supported by HW [ 11.451632] rk_gmac-dwmac ffa80000.ethernet eth0: configuring for phy/rmii le [ 11.516818] udevd[306]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 11.520880] udevd[307]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.522176] udevd[308]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.523245] udevd[309]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.524496] udevd[310]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.549618] udevd[315]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.554886] udevd[316]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.631542] udevd[321]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.632930] udevd[322]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy [ 11.637540] udevd[324]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/viy wlan0 not found. Stop run rkwifi_server. [ 13.526773] rk_gmac-dwmac ffa80000.ethernet eth0: Link is Up - 100Mbps/Full x ECDSA ED25519 Starting sshd: OK Starting telnetd: OK /etc/init.d/S50usbdevice: line 144: can't open : no such file Debug: configfs_init [ 15.742929] file system registered mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functionsy [ 15.761416] using random self ethernet address [ 15.761444] using random host ethernet address mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functionsy [ 15.775455] Mass Storage Function, version: 2009/09/11 [ 15.775489] LUN: removable file: (no medium) [ 15.862578] read descriptors [ 15.862779] read strings [ 16.858708] usb0: HOST MAC 46:4c:89:6a:73:1a [ 16.858736] usb0: MAC 26:3b:89:4b:d2:1c [ 16.977179] dwc3 ffb00000.usb: device reset [ 17.095582] dwc3 ffb00000.usb: device reset [ 17.222181] android_work: sent uevent USB_STATE=CONNECTED [ 17.227248] android_work: sent uevent USB_STATE=CONFIGURED /usr/bin/luckfox-config: line 234: warning: command substitution: ignored null t Only Luckfox Pico Ultra /Luckfox Pico Ultra W support RGB Complete configuration loading /root/main.py and /root/boot.py not exist ,pass... OK hwclock: can't open '/dev/misc/rtc': No such file or directory RTC does not require time calibration current_ip = 172.32.0.70 TARGET_IP = 172.32.0.93 luckfox : set usb0 ip 172.32.0.93 usb0 config success Welcome to luckfox pico luckfox login: [ 164.326325] rk_gmac-dwmac ffa80000.ethernet eth0: Link is Down |
카메라 달고
| DDR 306b9977f5 wesley.yao 23/12/21-09:28:37,fwver: v1.15 S5P1 4x fc27 rgef0 rgef1 DDRConf1 DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Size=64MB 528MHz DDR bin out U-Boot SPL board init U-Boot SPL 2017.09 (Jun 26 2025 - 11:26:17) Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 2 MMC: no card present mmc_init: -123, time 2 spl: mmc init failed with error: -123 Trying to boot from MTD1 ENVF: Primary 0x00000000 - 0x00040000 No misc partition Trying fit image at 0x400 sector ## Verified-boot: 0 ## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(4d47532412...) + sha256(60a6b1a2c6...) + OK ## Checking fdt 0x00261170 ... sha256(9f596c5683...) + OK Total: 133.963/216.804 ms Jumping to U-Boot(0x00200000) U-Boot 2017.09 (Jun 26 2025 - 11:26:17 +0800) Model: Rockchip RV1106 EVB Board MPIDR: 0xf00 PreSerial: 2, raw, 0xff4c0000 DRAM: 64 MiB Sysmem: init Relocation Offset: 03d80000 Relocation fdt: 02df9f58 - 02dfede8 CR: M/C/I Using default environment Bootdev(atags): mtd 1 ENVF: Primary 0x00000000 - 0x00040000 PartType: ENV DM: v2 No misc partition boot mode: None RESC: 'boot', blk@0x00002002 resource: sha256+ FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK Model: Luckfox Pico Plus ## retrieving sd_update.txt ... MMC: no card present mmc_init: -123, time 2 CLK: (uboot. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz aclk_peri_root 400000 KHz hclK_peri_root 200000 KHz pclk_peri_root 100000 KHz aclk_bus_root 300000 KHz pclk_top_root 100000 KHz pclk_pmu_root 100000 KHz hclk_pmu_root 200000 KHz Net: eth0: ethernet@ffa80000 Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image at 0x28f8b00 with size 0x00300400 Fdt Ramdisk skip relocation No misc partition ## Loading kernel from FIT Image at 028f8b00 ... Using 'conf' configuration ## Verified-boot: 0 Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x02902100 Data Size: 3108184 Bytes = 3 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: sha256 Hash value: 0392dc0511d1bf4d71172f243b3539e9a64ec2e4bc38da8376d2c12f033f3687 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 028f8b00 ... Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x028f9300 Data Size: 36148 Bytes = 35.3 KiB Architecture: ARM Load Address: 0x00c00000 Hash algo: sha256 Hash value: b1e59866e424e3ea19754e15354aa22223981fe5eba6357dbc80cb718ac6adbd Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x028f8b00 to 0x00c00000 Booting using the fdt blob at 0x00c00000 Loading Kernel Image from 0x02902100 to 0x00008000 ... OK kernel loaded at 0x00008000, end = 0x002fed58 Using Device Tree in place at 00c00000, end 00c0bd33 Adding bank: 0x00000000 - 0x04000000 (size: 0x04000000) Total: 593.829/815.731 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.160 (hxj@luckfox-System-Product-Name) (arm-rockchip830-linux-uclibcgnueabihf-gcc (crosstool-NG 1.24.0) 8.3.0, GNU ld (crosstoo5 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Luckfox Pico Plus [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 24576 KiB at 0x02800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: user_debug=31 storagemedia=mtd androidboot.storagemedia=mtd androidboot.mode=normal rootwait earlycon=uart8250,mmio32,0xff45 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 33452K/65536K available (3879K kernel code, 390K rwdata, 1884K rodata, 200K init, 139K bss, 7508K reserved, 24576K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000019] Switching to timer-based delay loop, resolution 41ns [ 0.000517] Console: colour dummy device 80x30 [ 0.000568] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000586] pid_max: default: 4096 minimum: 301 [ 0.000762] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000775] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001422] CPU: Testing write buffer coherency: ok [ 0.002110] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.002609] devtmpfs: initialized [ 0.009608] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.009860] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009888] futex hash table entries: 16 (order: -5, 192 bytes, linear) [ 0.009982] pinctrl core: initialized pinctrl subsystem [ 0.011220] NET: Registered protocol family 16 [ 0.011699] DMA: failed to allocate 0 KiB pool for atomic coherent allocation [ 0.012300] Registered FIQ tty driver [ 0.012644] thermal_sys: Registered thermal governor 'step_wise' [ 0.012651] thermal_sys: Registered thermal governor 'user_space' [ 0.012902] cpuidle: using governor menu [ 0.026588] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000 [ 0.027413] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000 [ 0.028202] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000 [ 0.028889] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000 [ 0.028991] rockchip-pinctrl pinctrl: probed pinctrl [ 0.039296] fiq_debugger fiq_debugger.0: IRQ uart_irq not found [ 0.039320] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 0.039589] printk: console [ttyFIQ0] enabled [ 0.039790] Registered fiq debugger ttyFIQ0 [ 0.041950] SCSI subsystem initialized [ 0.042177] usbcore: registered new interface driver usbfs [ 0.042240] usbcore: registered new interface driver hub [ 0.042291] usbcore: registered new device driver usb [ 0.042542] mc: Linux media interface: v0.10 [ 0.042583] videodev: Linux video capture interface: v2.00 [ 0.043815] Advanced Linux Sound Architecture Driver Initialized. [ 0.044649] rockchip-cpuinfo cpuinfo: SoC : 11031000 [ 0.044673] rockchip-cpuinfo cpuinfo: Serial : 3c6d8f8ee95e4dd0 [ 0.045079] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: probe success! [ 0.045940] clocksource: Switched to clocksource arch_sys_counter [ 0.052700] NET: Registered protocol family 2 [ 0.052955] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.053382] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.053419] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.053437] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.053455] TCP: Hash tables configured (established 1024 bind 1024) [ 0.053568] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.053593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.053748] NET: Registered protocol family 1 [ 0.054410] RPC: Registered named UNIX socket transport module. [ 0.054433] RPC: Registered udp transport module. [ 0.054440] RPC: Registered tcp transport module. [ 0.054446] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.055530] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully! [ 0.056716] Initialise system trusted keyrings [ 0.057048] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.060773] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.061613] NFS: Registering the id_resolver key type [ 0.061732] Key type id_resolver registered [ 0.061743] Key type id_legacy registered [ 0.061791] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.062303] Key type asymmetric registered [ 0.062327] Asymmetric key parser 'x509' registered [ 0.062352] io scheduler mq-deadline registered [ 0.062768] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found [ 0.067717] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-241330 Seeding 256 bits and crediting [ 0.067754] dma-pl330 ff420000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 Saving 256 bits of creditable seed for next boot [ 0.068604] rockchip-pvtm ff240000.pvtm: pvtm@0 probed Starting syslogd: OK [ 0.068782] rockchip-pvtm ff390000.pvtm: pvtm@0 probed Starting klogd: [ 0.069130] rockchip-system-monitor rockchip-system-monitor: system monitor probe OK [ 0.069686] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.075490] random: crng init done [ 0.084526] brd: module loaded [ 0.090482] loop: module loaded [ 0.092740] spi-nand spi2.0: Winbond SPI NAND was found. Running sysctl: [ 0.092769] spi-nand spi2.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.094000] 7 cmdlinepart partitions found on MTD device spi-nand0 [ 0.094019] Creating 7 MTD partitions on "spi-nand0": [ 0.094034] 0x000000000000-0x000000040000 : "env" [ 0.095937] 0x000000040000-0x000000080000 : "idblock" [ 0.097817] 0x000000080000-0x000000100000 : "uboot" [ 0.099725] 0x000000100000-0x000000500000 : "boot" [ 0.101586] 0x000000500000-0x000002300000 : "oem" [ 0.103538] 0x000002300000-0x000002900000 : "userdata" OK [ 0.105484] 0x000002900000-0x000007e00000 : "rootfs" Populating /dev using udev: [ 0.109004] rk_gmac-dwmac ffa80000.ethernet: IRQ eth_lpi not found [ 0.109203] rk_gmac-dwmac ffa80000.ethernet: PTP uses main clock [ 0.109257] rk_gmac-dwmac ffa80000.ethernet: no regulator found [ 0.109270] rk_gmac-dwmac ffa80000.ethernet: clock input or output? (input). [ 0.109281] rk_gmac-dwmac ffa80000.ethernet: Can not read property: tx_delay. [ 0.109290] rk_gmac-dwmac ffa80000.ethernet: set tx_delay to 0xffffffff [ 0.109299] rk_gmac-dwmac ffa80000.ethernet: Can not read property: rx_delay. [ 0.109309] rk_gmac-dwmac ffa80000.ethernet: set rx_delay to 0xffffffff [ 0.109393] rk_gmac-dwmac ffa80000.ethernet: integrated PHY? (yes). [ 0.109409] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_rx [ 0.109421] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_tx [ 0.109456] rk_gmac-dwmac ffa80000.ethernet: cannot get clock clk_mac_speed [ 0.109465] rk_gmac-dwmac ffa80000.ethernet: clock input from PHY [ 0.109706] rk_gmac-dwmac ffa80000.ethernet: init for RMII [ 0.109952] rk_gmac-dwmac ffa80000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.109974] rk_gmac-dwmac ffa80000.ethernet: DWMAC4/5 [ 0.109990] rk_gmac-dwmac ffa80000.ethernet: DMA HW capability register supported [ 0.110001] rk_gmac-dwmac ffa80000.ethernet: RX Checksum Offload Engine supported [ 0.110009] rk_gmac-dwmac ffa80000.ethernet: TX Checksum insertion supported [ 0.110016] rk_gmac-dwmac ffa80000.ethernet: Wake-Up On Lan supported [ 0.110024] rk_gmac-dwmac ffa80000.ethernet: TSO supported [ 0.110033] rk_gmac-dwmac ffa80000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.110042] rk_gmac-dwmac ffa80000.ethernet: TSO feature enabled [ 0.110054] rk_gmac-dwmac ffa80000.ethernet: Using 40 bits DMA width [ 0.117707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.118072] usbcore: registered new interface driver usb-storage [ 0.118231] usbcore: registered new interface driver usb_ch343 [ 0.118243] ch343: USB serial driver for ch342/ch343/ch344/ch347/ch9101/ch9102/ch9103/ch9104, etc. [ 0.118249] ch343: V1.5 On 2022.12 [ 0.118426] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.118472] Mass Storage Function, version: 2009/09/11 [ 0.118486] LUN: removable file: (no medium) [ 0.118524] no file given for LUN0 [ 0.118558] udc ffb00000.usb: failed to start g_mass_storage: -22 [ 0.119151] i2c /dev entries driver [ 0.120751] i2c i2c-4: 1 i2c clients have been registered at 0x30 [ 0.121132] i2c i2c-4: 2 i2c clients have been registered at 0x30 [ 0.122143] usbcore: registered new interface driver uvcvideo [ 0.122160] USB Video Class driver (1.1.1) [ 0.122943] cpu cpu0: leakage=15 [ 0.123711] cpu cpu0: avs=0 [ 0.123882] cpu cpu0: opp calibration done [ 0.124064] cpu cpu0: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 [ 0.124524] Synopsys Designware Multimedia Card Interface Driver [ 0.125422] dtbocfg: 0.1.0 [ 0.125481] dtbocfg: OK [ 0.127049] dwmmc_rockchip ffaa0000.mmc: No normal pinctrl state [ 0.127083] dwmmc_rockchip ffaa0000.mmc: No idle pinctrl state [ 0.127332] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode. [ 0.127384] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller. [ 0.127402] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a [ 0.127447] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 50,32 bit host data width,256 deep fifo [ 0.127571] mmc_host mmc1: card is non-removable. [ 0.128756] usbcore: registered new interface driver snd-usb-audio [ 0.129369] rv1106-acodec ff480000.acodec: current soc_id: rv1103 [ 0.129470] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_ms: 0 [ 0.131285] NET: Registered protocol family 17 [ 0.131401] Key type dns_resolver registered [ 0.132447] Loading compiled-in X.509 certificates [ 0.149047] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.160683] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 0.188190] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 0.239257] ubi0: attaching mtd6 [ 0.248602] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) [ 0.296033] mmc_host mmc1: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1) [ 0.412063] ubi0: scanning is finished [ 0.416880] ubi0: attached mtd6 (name "rootfs", size 85 MiB) [ 0.416907] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.416916] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.416925] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.416934] ubi0: good PEBs: 680, bad PEBs: 0, corrupted PEBs: 0 [ 0.416943] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 0.416953] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 390075883 [ 0.416963] ubi0: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 20 [ 0.418189] ALSA device list: [ 0.418209] #0: rv-acodec [ 0.418996] ubi0: background thread "ubi_bgt0d" started, PID 55 [ 0.419102] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 0.435641] UBIFS (ubi0:0): recovery needed [ 0.464321] UBIFS (ubi0:0): recovery deferred [ 0.464457] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode [ 0.464473] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 0.464487] UBIFS (ubi0:0): FS size: 81899520 bytes (78 MiB, 645 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 0.464496] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 0.464508] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID C56877BC-9B0F-4083-82F3-9ED0A04F937F, small LPT model [ 0.464937] VFS: Mounted root (ubifs filesystem) readonly on device 0:14. [ 0.465744] devtmpfs: mounted [ 0.466012] Freeing unused kernel memory: 200K [ 0.466023] Kernel memory protection not selected by kernel config. [ 0.466053] Run /sbin/init as init process [ 0.473350] process '/bin/busybox' started with executable stack [ 0.532097] UBIFS (ubi0:0): completing deferred recovery [ 0.567564] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 58 [ 0.573267] UBIFS (ubi0:0): deferred recovery completed [ 0.800126] udevd[88]: starting version 3.2.7 [ 0.816457] udevd[88]: specified group 'input' unknown [ 0.817463] udevd[88]: specified group 'kvm' unknown [ 0.840905] udevd[89]: starting eudev-3.2.7 [ 1.250973] udevd[103]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd0ro': No such file or directory [ 1.255209] udevd[105]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd2ro': No such file or directory [ 1.255847] udevd[104]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd1ro': No such file or directory [ 1.259272] udevd[106]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd3ro': No such file or directory [ 1.260577] udevd[107]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd4ro': No such file or directory [ 1.289622] udevd[109]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd6ro': No such file or directory [ 1.294649] udevd[108]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd5ro': No such file or directory done /etc/init.d/S20linkmount info: mount point path [IGNORE] not found, skip... ***********/dev/ubi4_0 not exist*********** ***********/dev/ubi4 not exist*********** [ 1.724522] ubi4: attaching mtd4 [ 1.784798] ubi4: scanning is finished [ 1.793420] ubi4: attached mtd4 (name "oem", size 30 MiB) [ 1.793451] ubi4: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes UBI device number 4, total 240 LEBs (30474240 bytes, 29.1 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [ 1.793461] ubi4: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 try to make volume: /dev/ubi4_0 ... [ 1.793471] ubi4: VID header offset: 2048 (aligned 2048), data offset: 4096 ubimkvol: error!: bad volume size: "0" [ 1.793479] ubi4: good PEBs: 240, bad PEBs: 0, corrupted PEBs: 0 [ 1.793489] ubi4: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.793500] ubi4: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 856855343 [ 1.793509] ubi4: available PEBs: 0, total reserved PEBs: 240, PEBs reserved for bad PEB handling: 20 [ 1.794785] ubi4: background thread "ubi_bgt4d" started, PID 129 [ 1.822237] UBIFS (ubi4:0): Mounting in unauthenticated mode [ 1.822515] UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 134 [ 1.839833] UBIFS (ubi4:0): recovery needed [ 1.889204] UBIFS (ubi4:0): recovery completed [ 1.889326] UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "oem" [ 1.889342] UBIFS (ubi4:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 1.889355] UBIFS (ubi4:0): FS size: 26157056 bytes (24 MiB, 206 LEBs), journal size 4190208 bytes (3 MiB, 33 LEBs) [ 1.889364] UBIFS (ubi4:0): reserved for root: 0 bytes (0 KiB) ***********/dev/ubi5_0 not exist*********** [ 1.889377] UBIFS (ubi4:0): media format: w4/r0 (latest is w5/r0), UUID 46669579-30C0-42F7-B140-BC1C222FA599, small LPT model ***********/dev/ubi5 not exist*********** [ 1.929043] ubi5: attaching mtd5 [ 1.941611] ubi5: scanning is finished UBI device number 5, total 48 LEBs (6094848 bytes, 5.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [ 1.950211] ubi5: attached mtd5 (name "userdata", size 6 MiB) try to make volume: /dev/ubi5_0 ... [ 1.950239] ubi5: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubimkvol: error!: bad volume size: "0" [ 1.950248] ubi5: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.950258] ubi5: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.950267] ubi5: good PEBs: 48, bad PEBs: 0, corrupted PEBs: 0 [ 1.950276] ubi5: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.950286] ubi5: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1133520942 [ 1.950297] ubi5: available PEBs: 0, total reserved PEBs: 48, PEBs reserved for bad PEB handling: 20 [ 1.952447] ubi5: background thread "ubi_bgt5d" started, PID 143 [ 1.973134] UBIFS (ubi5:0): Mounting in unauthenticated mode [ 1.973404] UBIFS (ubi5:0): background thread "ubifs_bgt5_0" started, PID 148 [ 1.990342] UBIFS (ubi5:0): recovery needed Initializing random number generator... [ 2.039237] UBIFS (ubi5:0): recovery completed [ 2.039368] UBIFS (ubi5:0): UBIFS: mounted UBI device 5, volume 0, name "userdata" [ 2.039383] UBIFS (ubi5:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes done. [ 2.039396] UBIFS (ubi5:0): FS size: 1777664 bytes (1 MiB, 14 LEBs), journal size 1142785 bytes (1 MiB, 9 LEBs) [ 2.039406] UBIFS (ubi5:0): reserved for root: 0 bytes (0 KiB) [ 2.039418] UBIFS (ubi5:0): media format: w4/r0 (latest is w5/r0), UUID CC149189-A83A-40F1-8FC2-61374A6C968F, small LPT model /dev/ubi5_0 on /userdata type ubifs (rw,relatime,assert=read-only,ubi=5,vol=0) Starting network: [ 2.177175] rk_dvbm ffa70000.rkdvbm: probe start [ 2.177224] rk_dvbm ffa70000.rkdvbm: dvbm ctx f401c79f [ 2.177803] rk_dvbm ffa70000.rkdvbm: probe success [ 2.202066] sc3336 4-0030: driver version: 00.01.01 [ 2.202159] sc3336 4-0030: Failed to get reset-gpios [ 2.202216] sc3336 4-0030: could not get default pinstate OK [ 2.202226] sc3336 4-0030: could not get sleep pinstate Starting ntpd: [ 2.202253] sc3336 4-0030: supply avdd not found, using dummy regulator [ 2.202505] sc3336 4-0030: supply dovdd not found, using dummy regulator [ 2.202593] sc3336 4-0030: supply dvdd not found, using dummy regulator [ 2.220847] sc3336 4-0030: Detected OV00cc41 sensor [ 2.293353] rkcifhw ffa10000.rkcif: no iommu attached, using non-iommu buffers [ 2.293394] rkcifhw ffa10000.rkcif: No reserved memory region assign to CIF [ 2.293828] rkcif rkcif-mipi-lvds: rkcif driver version: v00.02.00 [ 2.293954] rkcif rkcif-mipi-lvds: attach to cif hw node [ 2.293969] rkcif rkcif-mipi-lvds: failed to get dphy hw node [ 2.293981] rkcif rkcif-mipi-lvds: rkcif wait line 0 [ 2.293993] rkcif rkcif-mipi-lvds: rkcif fastboot reserve bufs num 3 [ 2.294009] : terminal subdev does not exist [ 2.294021] : terminal subdev does not exist [ 2.294028] : terminal subdev does not exist [ 2.294036] : terminal subdev does not exist [ 2.294047] : get_remote_sensor: video pad[0] is null [ 2.294058] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.294070] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 2.294078] : get_remote_sensor: video pad[0] is null [ 2.294086] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.294094] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 2.294102] : get_remote_sensor: video pad[0] is null [ 2.294109] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.294117] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 2.294126] : get_remote_sensor: video pad[0] is null [ 2.294132] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.294141] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 2.309171] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified [ 2.310491] rockchip-mipi-csi2-hw ffa20000.mipi-csi2-hw: enter mipi csi2 hw probe! [ 2.310691] rockchip-mipi-csi2-hw ffa20000.mipi-csi2-hw: probe success, v4l2_dev:mipi-csi2-hw! [ 2.310878] rockchip-mipi-csi2-hw ffa30000.mipi-csi2-hw: enter mipi csi2 hw probe! [ 2.311043] rockchip-mipi-csi2-hw ffa30000.mipi-csi2-hw: probe success, v4l2_dev:mipi-csi2-hw! [ 2.311529] rockchip-mipi-csi2 mipi0-csi2: attach to csi2 hw node [ 2.311600] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized! [ 2.311621] rockchip-mipi-csi2: Async registered subdev [ 2.311636] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds! [ 2.376171] rkisp_hw ffa00000.rkisp: is_thunderboot: 0 [ 2.376204] rkisp_hw ffa00000.rkisp: Missing rockchip,grf property [ 2.376254] rkisp_hw ffa00000.rkisp: max input:0x0@0fps [ 2.376434] rkisp_hw ffa00000.rkisp: get sram size:253952 [ 2.376449] rkisp_hw ffa00000.rkisp: no iommu attached, using non-iommu buffers [ 2.376461] rkisp_hw ffa00000.rkisp: No reserved memory region. default cma area! [ 2.376889] rkisp rkisp-vir0: rkisp driver version: v02.05.00 [ 2.377046] rkisp rkisp-vir0: No memory-region-thunderboot specified [ 2.378396] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized! [ 2.409710] rockchip-csi2-dphy-hw ff3e8000.csi2-dphy-hw: csi2 dphy hw probe successfully! [ 2.427277] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_sc3336 4-0030:bus type 5 [ 2.427309] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully! 0 [ 2.729629] rkcif rkcif-mipi-lvds: clear unready subdev num: 2 [ 2.731510] rkcif-mipi-lvds: Async subdev notifier completed [ 2.732925] rkisp-vir0: Async subdev notifier completed [ 2.733794] rkisp rkisp-vir0: clear unready subdev num: 0 [ 2.772340] rga: rga2, irq = 36, match scheduler [ 2.773451] rga: rga2 hardware loaded successfully, hw_version:3.3.87975. [ 2.773480] rga: rga2 probe successfully [ 2.773798] rga_iommu: IOMMU binding successfully, default mapping core[0x4] [ 2.775303] rga: Module initialized. v1.3.1 OK [ 2.899225] mpp_vcodec: loading out-of-tree module taints kernel. [ 2.918474] mpp_vcodec: init new [ 2.918675] mpp_service mpp-srv: 424abb9b author: Yandong Lin 2024-04-29 [mpp_enc]: fix wrap enc sw timeout when resolution switch [ 2.918690] mpp_service mpp-srv: probe start [ 2.920674] mpp_rkvenc_540c ffa50000.rkvenc: probing start [ 2.920967] mpp_rkvenc_540c ffa50000.rkvenc: probing finish [ 2.921468] mpp_vepu_pp ffa60000.rkvenc-pp: probe device [ 2.921582] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_a_pp is not found! [ 2.921594] vepu_pp_init:526: No aclk reset resource define [ 2.921604] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_h_pp is not found! Input rkcif-mipi-lvds Format:SBGGR10_1X10 Size:2304x1296@30fps Offset(0,0) [ 2.921611] vepu_pp_init:529: No hclk reset resource define [ 2.923359] mpp_vepu_pp ffa60000.rkvenc-pp: probing finish [ 2.923681] mpp_service mpp-srv: probe success [ 2.954319] RKNPU ff660000.npu: RKNPU: rknpu iommu device-tree entry not found!, using non-iommu mode [ 2.954918] RKNPU ff660000.npu: RKNPU: Initialized RKNPU driver: v0.9.2 for 20230825 [ 2.955035] RKNPU ff660000.npu: dev_pm_opp_set_regulators: no regulator (rknpu) found: -19 Starting sshd: [ 3.043190] rockit_load start [ 3.064704] rockit_load end [ 3.085357] rve: rve_irq, irq = 52, match scheduler [ 3.085926] rve: Driver loaded successfully rve[2] ver:[2021]58.1a [ 3.086005] rve: probe successfully [ 3.088428] rve: Module initialized. v1.0.6 / ln: /oem/usr/www/userdata: No such file or directory ln: /oem/usr/www/usb0: No such file or directory ln: /oem/usr/www/sdcard: No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory sc3336 9940 1 cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/usb/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/usb/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/usb/devices/*/uevent': No such file or directory cat: can't open '/sys/bus/sdio/devices/*/uevent': No such file or directory [ 3.431562] rk_gmac-dwmac ffa80000.ethernet eth0: PHY [stmmac-0:02] driver [RK630 PHY] (irq=POLL) [ 3.431966] dwmac4: Master AXI performs any burst length [ 3.431997] rk_gmac-dwmac ffa80000.ethernet eth0: No Safety Features support found [ 3.432019] rk_gmac-dwmac ffa80000.ethernet eth0: PTP not supported by HW [ 3.432347] rk_gmac-dwmac ffa80000.ethernet eth0: configuring for phy/rmii link mode OK wlan0 not found. Stop run rkwifi_server. Starting telnetd: OK /etc/init.d/S50usbdevice: line 144: can't open : no such file Debug: configfs_init [ 3.929663] file system registered mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory [ 3.971746] using random self ethernet address [ 3.971783] using random host ethernet address mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/acm.gs6': No such file or directory [ 3.998965] Mass Storage Function, version: 2009/09/11 [ 3.998999] LUN: removable file: (no medium) [ 4.139705] read descriptors [ 4.139916] read strings [common.c][rkipc_version_dump]:rkipc version: unknown rkipc version for missing VCS info [common.c][rkipc_version_dump]:rkipc info: unknown rkipc build info [common.c][rkipc_version_dump]:rkipc type: COMPILE_FOR_RV1103_IPC [rkipc.c][main]:rkipc_ini_path_ is (null), rkipc_iq_file_path_ is /oem/usr/share/iqfiles, rkipc_log_level is 2 [param.c][rk_param_init]:g_ini_path_ is /userdata/rkipc.ini [network.c][rk_net_proc]:Creat rk_net_proc thread! [isp.c][rk_isp_init]:g_iq_file_dir_ is /oem/usr/share/iqfiles [isp.c][rk_isp_init]:cam_id is 0, hdr_mode is close, scenario is normal [ 4.226884] stream_cif_mipi_id0: s_power 1, entity use_count 1 [network.c][ntp_client_thread]:refresh_time_s is 60, ntp_server is 119.28.183.184 [ 4.227768] stream_cif_mipi_id0: s_power 0, entity use_count 0 rkaiq log level ff1 XCORE:K:rk_aiq_init_lib, ISP HW ver: 32 XCORE:K: ************************** VERSION INFOS ************************** version release date: 2024-2-18 AIQ: AIQ v5.0x5.0 git logs: 25bd14e RV1106: smart_door: release rga/isp/mpp for V1.3.0 99d080a RV1106/RV1103: Battery/Doorbell: release kmpp/rockit-ko for V1.3.2 6458e2a RV1106/RV1103: Battery/Doorbell: release kmpp/rockit-ko for V1.3.1 e8dab39 RV1106: CVR: release rga/isp/mpp for V1.1.0 a021b32 RV1106/RV1103: Battery/Doorbell: release kmpp/rockit-ko for V1.3.0 ************************ VERSION INFOS END ************************ [isp.c][sample_common_isp_init]:ID: 0, sensor_name is m00_b_sc3336 4-0030, iqfiles is /oem/usr/share/iqfiles XCORE:K:rk_aiq_uapi_sysctl_preInit_devBufCnt: dev_ent:rkraw_rx, buf_cnt:2 [isp.c][sample_common_isp_init]:main_scene is normal, sub_scene is day [isp.c][sample_common_isp_init]:00:00:04.227150: rk_aiq_uapi2_sysctl_preInit_scene begin XCORE:K:rk_aiq_uapi_sysctl_preInit_scene: main_scene: normal, sub_scene: day [isp.c][sample_common_isp_init]:00:00:04.227444: rk_aiq_uapi2_sysctl_preInit_scene over XCORE:E:invalid main scene len! [ 4.476021] stream_cif_mipi_id0: s_power 1, entity use_count 1 [ 4.478694] stream_cif_mipi_id0: open video, entity use_countt 2 IPCSERVER:K:cid[0] Process path:/tmp/UNIX.domain0, sockfd:14 [ 4.478940] stream_cif_mipi_id1: open video, entity use_countt 1 XCORE:K:cid[0] rk_aiq_uapi_sysctl_init success. iq:/oem/usr/share/iqfiles/sc3336_CMK-OT2119-PC1_30IRC-F16.json [isp.c][sample_common_isp_init]:00:00:04.477478: rk_aiq_uapi2_sysctl_init over [ 4.512880] rkisp rkisp-vir0: first params buf queue XCORE:K:cid[0] rk_aiq_uapi_sysctl_prepare success. mode:0 [isp.c][sample_common_isp_run]:00:00:04.507136: rk_aiq_uapi2_sysctl_prepare succeed CAMHW:K:cid[0] start success. isGroup:0, isOnline:1, isMultiIsp:0, init_ens:0x1bfc0ffc4739 XCORE:K:cid[0] rk_aiq_uapi_sysctl_start success. [isp.c][sample_common_isp_run]:00:00:04.509710: rk_aiq_uapi2_sysctl_start succeed failed to open /sys/class/pwm/pwmchip3/export [isp.c][rk_isp_set_light_strength]:pwm3 init failed -2 [isp.c][rk_isp_set_blc_strength]:blc mode is not enabled [isp.c][rk_isp_set_hlc_level]:hlc mode is not enabled [isp.c][rk_isp_set_white_blance_red]:white blance is auto, not support set gain [isp.c][rk_isp_set_white_blance_green]:white blance is auto, not support set gain [isp.c][rk_isp_set_white_blance_blue]:white blance is auto, not support set gain [ 4.658110] vsys dev open 27 ALDCH:E:uapi want to disalbe ldch, but ldch has been disalbed! [ 4.674773] stream_cif_mipi_id0: open video, entity use_countt 3 ALDCH:E:uapi want to disalbe ldch, but ldch has been disalbed! [ 4.674880] stream_cif_mipi_id0: close video, entity use_count 2 rockit log path (null), log_size = 0, can use export rt_log_path=, export rt_log_size= change [ 4.682117] stream_cif_mipi_id0: open video, entity use_countt 3 log_file = (nil) [ 4.683782] stream_cif_mipi_id0: close video, entity use_count 2 RTVersion 00:00:04-637 {dump :064} --------------------------------------------------------- [ 4.699112] stream_cif_mipi_id0: open video, entity use_countt 3 RTVersion 00:00:04-638 {dump :065} rockit version: git-4720dc10a Tue Apr 30 15:47:55 2024 +0800 [ 4.699305] stream_cif_mipi_id0: close video, entity use_count 2 RTVersion 00:00:04-639 {dump :066} rockit building: built- 2024-04-30 15:53:43 [ 4.705241] stream_cif_mipi_id0: open video, entity use_countt 3 RTVersion 00:00:04-639 {dump :067} --------------------------------------------------------- [ 4.705333] stream_cif_mipi_id0: close video, entity use_count 2 rockit default level 4, can use export rt_log_level=x, x=0,1,2,3,4,5,6 change [ 4.710484] rkisp-vir0: rockit wrap buf:0x2d12000 (null) 00:00:04-639 {read_log_level :098} text is all=4 [ 4.710507] rkisp queue buf done (null) 00:00:04-640 {read_log_level :100} module is all, log_level is 4 [ 4.711239] rkisp-vir0: wrap_line mode can not set the mirror (null) 00:00:04-644 {monitor_log_level :149} #Start monitor_log_level thread, arg:(nil) [ 4.711482] rkisp_hw ffa00000.rkisp: set isp clk = 198000000Hz [video.c][rk_video_init]:enable_jpeg is 1, enable_venc_0 is 1, enable_venc_1 is 1, enable_rtsp is 1, enable_rtmp is 0 [ 4.713347] rkcif-mipi-lvds: stream[0] start streaming RKViDev 00:00:04-660 {vi_set_dev_attr :612} VI_DEV_ATTR_S all parameter reserved [ 4.713501] rockchip-mipi-csi2 mipi0-csi2: stream on, src_sd: a2acbb11, sd_name:rockchip-csi2-dphy0 RTIsp3x 00:00:04-668 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 [ 4.713516] rockchip-mipi-csi2 mipi0-csi2: stream ON RTDeviceSensorV4 00:00:04-676 {ispOpenDevice :502} v4l2_open(/dev/video0), handler=46 [ 4.713576] rockchip-csi2-dphy0: dphy0, data_rate_mbps 510 RTDeviceSensorV4 00:00:04-676 {ispOpenDevice :502} v4l2_open(/dev/v4l-subdev2), handler=48 [ 4.713614] rockchip-csi2-dphy csi2-dphy0: csi2_dphy_s_stream stream on:1, dphy0, ret 0 RTDeviceSensorV4 00:00:04-677 {close :112} do RTDeviceSensorV4L2 close [ 4.738775] rkisp-vir0: wrap_line mode can not set the mirror RTDeviceSensorV4 00:00:04-678 {close :112} do RTDeviceSensorV4L2 close [ 4.745841] mpp_vcodec: 45: num_chan = 0 [INFO rtsp_demo.c:280:rtsp_new_demo] rtsp server demo starting on port 554 [ 4.746211] mpp_vcodec: 387: attr->max_width = 2304, attr->max_height = 1296 [DEBUG rtsp_demo.c:480:rtsp_new_session] add session path: /live/0 [ 4.756595] mpp_vcodec: 103: create channel 0 handle 0fc824ac online 1 rtsp streamq_alloc size is 1753484 [ 4.781637] 836: MPP_ENC_SET_CFG in rtsp streamq_alloc size is 59884 [ 4.781694] 532: MPP_ENC_SET_RC_CFG bps 11197440 [10497600 : 11897280] fps [30:30] gop 60 [DEBUG rtsp_demo.c:480:rtsp_new_session] add session path: /live/1 [ 4.781718] h265e_proc_prep_cfg:422: MPP_ENC_SET_PREP_CFG w:h [2304:1296] stride [2304:1296] rtsp streamq_alloc size is 1753484 [ 4.781729] 270: send header for set cfg change input/format rtsp streamq_alloc size is 59884 [ 4.783732] 836: MPP_ENC_SET_CFG in RKViChn 00:00:04-686 {prepareRuntime :354} --------------------------------------------------------- [ 4.783757] 532: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [30:30] gop 50 RKViChn 00:00:04-686 {prepareRuntime :356} vi version: 1.22, name:vvi [ 4.783770] 270: send header for set cfg change rc_mode/fps/gop RKViChn 00:00:04-686 {prepareRuntime :357} rockit-ko version: vmpi:28ee389dbc33 [ 4.784004] 836: MPP_ENC_SET_CFG in RKViChn 00:00:04-686 {prepareRuntime :358} rockit-ko building: -2024-05-24-18:15:06 [ 4.784020] 532: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 RKViChn 00:00:04-686 {prepareRuntime :359} --------------------------------------------------------- [ 4.784032] 270: send header for set cfg change rc_mode/fps/gop cmpi 00:00:04-690 {prepareRuntime :378} mb pool create success, MBCnt= 2 [ 4.784216] 836: MPP_ENC_SET_CFG in [video.c][rkipc_pipe_0_init]:set vi channel wrap line: 324, wrapBuffSize = 1119744 [ 4.784236] 532: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 cmpi 00:00:04-691 {updateWrapLine :1968} tmp wrap_line: 324, cur wrap_line: 324, cur_w: 2304, cur_h: 1296, max_res_width: 2304 [ 4.784247] 270: send header for set cfg change rc_mode/fps/gop RTIsp3x 00:00:04-692 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 [ 4.784765] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-694 {createRuntime :634} >>>>>>>>> Sensor link info dump: <<<<<<<<< [ 4.784793] 532: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 cmpi 00:00:04-695 {createRuntime :636} vicap media name : /dev/media0 [ 4.784810] 270: send header for set cfg change rc_mode/fps/gop cmpi 00:00:04-695 {createRuntime :637} vicap model name : rkcif-mipi-lvds [ 4.788285] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-695 {createRuntime :638} camera id : 0 [ 4.788326] 532: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 cmpi 00:00:04-695 {createRuntime :639} sensor name : m00_b_sc3336 4-0030 [ 4.788354] 270: send header for set cfg change rc_mode/fps/gop cmpi 00:00:04-695 {createRuntime :641} stream_cif_mipi_id0 video name: /dev/video0 [ 4.789179] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-695 {createRuntime :642} stream_cif_mipi_id1 video name: /dev/video1 [ 4.789201] 532: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 cmpi 00:00:04-695 {createRuntime :643} stream_cif_mipi_id2 video name: /dev/video2 [ 4.789214] 270: send header for set cfg change rc_mode/fps/gop cmpi 00:00:04-695 {createRuntime :644} stream_cif_mipi_id3 video name: /dev/video3 [ 4.789475] 1155: mode cbr bps [1920000:2048000:2176000] fps fix [25/1] -> fix [25/1] gop i [50] v [0] cmpi 00:00:04-695 {createRuntime :646} sensor raw width : 2304 [ 4.793218] stream_cif_mipi_id0: open video, entity use_countt 3 cmpi 00:00:04-695 {createRuntime :647} sensor raw height : 1296 [ 4.793346] stream_cif_mipi_id0: close video, entity use_count 2 cmpi 00:00:04-695 {createRuntime :648} --------------------------------------------------------- [ 4.807355] stream_cif_mipi_id0: open video, entity use_countt 3 cmpi 00:00:04-695 {createRuntime :654} isp media name : /dev/media1 [ 4.807476] stream_cif_mipi_id0: close video, entity use_count 2 cmpi 00:00:04-695 {createRuntime :655} isp model name : rkisp0 [ 4.809995] rkisp queue buf done cmpi 00:00:04-695 {createRuntime :656} isp driver name : rkisp-vir0 [ 4.810240] rkisp-vir0: wrap_line mode can not set the mirror cmpi 00:00:04-695 {createRuntime :657} isp dev name : /dev/v4l-subdev3 [ 4.811230] rkisp-vir0: wrap_line mode can not set the mirror cmpi 00:00:04-695 {createRuntime :659} isp rawrd0_m_path : /dev/video17 [ 4.811924] mpp_vcodec: 45: num_chan = 1 cmpi 00:00:04-695 {createRuntime :660} isp rawrd1_l_path : [ 4.812113] mpp_vcodec: 387: attr->max_width = 704, attr->max_height = 576 cmpi 00:00:04-695 {createRuntime :661} isp rawrd2_s_path : /dev/video18 [ 4.813852] mpp_vcodec: 103: create channel 1 handle f1cc4be3 online 0 cmpi 00:00:04-695 {createRuntime :664} mainpath video name : /dev/video11 [ 4.814695] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-696 {createRuntime :665} selfpath video name : /dev/video12 [ 4.814731] 532: MPP_ENC_SET_RC_CFG bps 1520640 [1425600 : 1615680] fps [30:30] gop 60 cmpi 00:00:04-696 {createRuntime :666} bypasspath video name : /dev/video13 [ 4.814753] h265e_proc_prep_cfg:422: MPP_ENC_SET_PREP_CFG w:h [704:576] stride [704:576] cmpi 00:00:04-696 {createRuntime :667} sensor link type : 2 [ 4.814774] 270: send header for set cfg change input/format cmpi 00:00:04-696 {createRuntime :668} sensor is united : 0 [ 4.815178] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-696 {createRuntime :672} --------------------------------------------------------- [ 4.815201] 532: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 cmpi 00:00:04-696 {createRuntime :708} [WRAP MODE]:set wrap buffer cnt = 2, wrap buff size = 1119744 [ 4.815215] 270: send header for set cfg change rc_mode/fps/gop RTIsp3x 00:00:04-699 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 [ 4.815396] 836: MPP_ENC_SET_CFG in RTDeviceV4L2 00:00:04-701 {open :137} cameraIndex:0, entityName:rkisp_mainpath [ 4.815419] 532: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 RTDeviceV4L2 00:00:04-701 {open :143} open video name(/dev/video11) [ 4.815435] 270: send header for set cfg change rc_mode/fps/gop RKViChn 00:00:04-701 {setFrameRate :1469} [vi] dev(0) ch(0) illegal param s32SrcFrameRate(0) s32DstFrameRate(0) [ 4.815589] 836: MPP_ENC_SET_CFG in RTDeviceV4L2 00:00:04-702 {ispCameraInfo :567} current device:/dev/video11 isn't compatible(cap:0x84201000) device,memoryType:4, retry:0 [ 4.815605] 532: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 RTDeviceV4L2 00:00:04-702 {ispInitFormat :767} ioctl VIDIOC_S_FMT OK [ 4.815617] 270: send header for set cfg change rc_mode/fps/gop cmpi 00:00:04-704 {start :1093} =========== vi Start startRuntime =========== [ 4.815725] 836: MPP_ENC_SET_CFG in RTDeviceV4L2 00:00:04-705 {ispStreamOn :458} do ispStreamOn start [ 4.815738] 532: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 CAMHW:K:camId:0, notify_isp_stream_status on [ 4.815748] 270: send header for set cfg change rc_mode/fps/gop RTDeviceV4L2 00:00:04-724 {ispStreamOn :511} do ispStreamOn done [ 4.815921] 836: MPP_ENC_SET_CFG in [video.c][rk_video_set_frame_rate]:num is 25, den is 1 [ 4.816098] 532: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 [video.c][rk_video_set_frame_rate]:old VI framerate is [-1:-1] [ 4.816114] 270: send header for set cfg change rc_mode/fps/gop [video.c][rk_video_set_frame_rate]:new VI framerate is [25:25] [ 4.819363] 836: MPP_ENC_SET_CFG in MpiAdapterEncode 00:00:04-739 {ma_encode_create :1743} ringbuf buf_size 1495040 [ 4.819399] 532: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 MpiAdapterEncode 00:00:04-760 {ma_encode_create :1782} mem_fd = 54 [ 4.819420] 270: send header for set cfg change rc_mode/fps/gop RKViChn 00:00:04-785 {prepareRuntime :354} --------------------------------------------------------- [ 4.821509] mpp_vcodec: 45: num_chan = 2 RKViChn 00:00:04-785 {prepareRuntime :356} vi version: 1.22, name:vvi [ 4.823223] mpp_vcodec: 103: create channel 4 handle 4f812336 online 1 RKViChn 00:00:04-785 {prepareRuntime :357} rockit-ko version: vmpi:28ee389dbc33 [ 4.823982] 836: MPP_ENC_SET_CFG in RKViChn 00:00:04-785 {prepareRuntime :358} rockit-ko building: -2024-05-24-18:15:06 [ 4.824049] 532: MPP_ENC_SET_RC_CFG bps 11197440 [10497600 : 11897280] fps [30:30] gop 60 RKViChn 00:00:04-785 {prepareRuntime :359} --------------------------------------------------------- [ 4.824379] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-785 {prepareRuntime :378} mb pool create success, MBCnt= 4 [ 4.824404] 532: MPP_ENC_SET_RC_CFG bps 11197440 [10497600 : 11897280] fps [30:30] gop 0 RTIsp3x 00:00:04-787 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 [ 4.824560] 836: MPP_ENC_SET_CFG in cmpi 00:00:04-788 {createRuntime :634} >>>>>>>>> Sensor link info dump: <<<<<<<<< [ 4.824578] 532: MPP_ENC_SET_RC_CFG bps 11197440 [10497600 : 11897280] fps [30:30] gop 0 cmpi 00:00:04-788 {createRuntime :636} vicap media name : /dev/media0 [ 4.832688] stream_cif_mipi_id0: open video, entity use_countt 3 cmpi 00:00:04-788 {createRuntime :637} vicap model name : rkcif-mipi-lvds [ 4.832858] stream_cif_mipi_id0: close video, entity use_count 2 cmpi 00:00:04-788 {createRuntime :638} camera id : 0 [ 4.857265] stream_cif_mipi_id0: open video, entity use_countt 3 cmpi 00:00:04-788 {createRuntime :639} sensor name : m00_b_sc3336 4-0030 [ 4.857488] stream_cif_mipi_id0: close video, entity use_count 2 cmpi 00:00:04-788 {createRuntime :641} stream_cif_mipi_id0 video name: /dev/video0 [ 4.867636] 1155: mode cbr bps [480000:512000:544000] fps fix [30/1] -> fix [30/1] gop i [50] v [0] cmpi 00:00:04-788 {createRuntime :642} stream_cif_mipi_id1 video name: /dev/video1 [ 4.877511] rkisp queue buf done cmpi 00:00:04-788 {createRuntime :643} stream_cif_mipi_id2 video name: /dev/video2 [ 4.877688] rkisp-vir0: wrap_line mode can not set the mirror cmpi 00:00:04-788 {createRuntime :644} stream_cif_mipi_id3 video name: /dev/video3 [ 4.882209] vepu_pp_create_chn 0 cmpi 00:00:04-788 {createRuntime :646} sensor raw width : 2304 [ 5.140990] usb0: HOST MAC 02:a1:d6:cb:89:b1 cmpi 00:00:04-788 {createRuntime :647} sensor raw height : 1296 [ 5.141018] usb0: MAC 2e:22:e7:b1:0f:44 cmpi 00:00:04-789 {createRuntime :648} --------------------------------------------------------- [ 5.270403] dwc3 ffb00000.usb: device reset cmpi 00:00:04-789 {createRuntime :654} isp media name : /dev/media1 [ 5.387869] dwc3 ffb00000.usb: device reset cmpi 00:00:04-789 {createRuntime :655} isp model name : rkisp0 [ 5.516631] android_work: sent uevent USB_STATE=CONNECTED cmpi 00:00:04-789 {createRuntime :656} isp driver name : rkisp-vir0 [ 5.516752] android_work: sent uevent USB_STATE=CONFIGURED cmpi 00:00:04-789 {createRuntime :657} isp dev name : /dev/v4l-subdev3 cmpi 00:00:04-789 {createRuntime :659} isp rawrd0_m_path : /dev/video17 cmpi 00:00:04-789 {createRuntime :660} isp rawrd1_l_path : cmpi 00:00:04-789 {createRuntime :661} isp rawrd2_s_path : /dev/video18 cmpi 00:00:04-789 {createRuntime :664} mainpath video name : /dev/video11 cmpi 00:00:04-789 {createRuntime :665} selfpath video name : /dev/video12 cmpi 00:00:04-789 {createRuntime :666} bypasspath video name : /dev/video13 cmpi 00:00:04-789 {createRuntime :667} sensor link type : 2 cmpi 00:00:04-789 {createRuntime :668} sensor is united : 0 cmpi 00:00:04-789 {createRuntime :672} --------------------------------------------------------- cmpi 00:00:04-789 {createRuntime :711} [non-WRAP MODE]: buff size = 608256 RTIsp3x 00:00:04-801 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 RTDeviceV4L2 00:00:04-802 {open :137} cameraIndex:0, entityName:rkisp_selfpath RTDeviceV4L2 00:00:04-803 {open :143} open video name(/dev/video12) RKViChn 00:00:04-803 {setFrameRate :1469} [vi] dev(0) ch(1) illegal param s32SrcFrameRate(0) s32DstFrameRate(0) RTDeviceV4L2 00:00:04-803 {ispCameraInfo :567} current device:/dev/video12 isn't compatible(cap:0x84201000) device,memoryType:4, retry:0 RTDeviceV4L2 00:00:04-803 {ispInitFormat :767} ioctl VIDIOC_S_FMT OK cmpi 00:00:04-804 {start :1093} =========== vi Start startRuntime =========== RTDeviceV4L2 00:00:04-804 {ispStreamOn :458} do ispStreamOn start RTDeviceV4L2 00:00:04-804 {ispStreamOn :511} do ispStreamOn done [video.c][rk_video_set_frame_rate]:num is 30, den is 1 [video.c][rk_video_set_frame_rate]:old VI framerate is [-1:-1] [video.c][rk_video_set_frame_rate]:new VI framerate is [25:30] RKViChn 00:00:04-805 {setFrameRate :1469} [vi] dev(0) ch(1) illegal param s32SrcFrameRate(25) s32DstFrameRate(30) MpiAdapterEncode 00:00:04-805 {ma_encode_create :1743} ringbuf buf_size 204800 MpiAdapterEncode 00:00:04-808 {ma_encode_create :1782} mem_fd = 59 MpiAdapterEncode 00:00:04-815 {ma_encode_create :1743} ringbuf buf_size 1048576 MpiAdapterEncode 00:00:04-817 {ma_encode_create :1782} mem_fd = 61 RKViChn 00:00:04-824 {prepareRuntime :354} --------------------------------------------------------- RKViChn 00:00:04-824 {prepareRuntime :356} vi version: 1.22, name:vvi RKViChn 00:00:04-824 {prepareRuntime :357} rockit-ko version: vmpi:28ee389dbc33 RKViChn 00:00:04-824 {prepareRuntime :358} rockit-ko building: -2024-05-24-18:15:06 RKViChn 00:00:04-824 {prepareRuntime :359} --------------------------------------------------------- cmpi 00:00:04-825 {prepareRuntime :378} mb pool create success, MBCnt= 2 RTIsp3x 00:00:04-826 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 MpiAdapterEncode 00:00:04-831 {ma_encode_get_pack:2079} map ptr: 0xa3e30000, fd 65 [DEBUG utils.c:186:rtsp_codec_data_parse_from_user_h265] vps 23 [DEBUG utils.c:194:rtsp_codec_data_parse_from_user_h265] sps 43 [DEBUG utils.c:202:rtsp_codec_data_parse_from_user_h265] pps 9 cmpi 00:00:04-839 {createRuntime :634} >>>>>>>>> Sensor link info dump: <<<<<<<<< cmpi 00:00:04-839 {createRuntime :636} vicap media name : /dev/media0 cmpi 00:00:04-839 {createRuntime :637} vicap model name : rkcif-mipi-lvds cmpi 00:00:04-839 {createRuntime :638} camera id : 0 cmpi 00:00:04-839 {createRuntime :639} sensor name : m00_b_sc3336 4-0030 cmpi 00:00:04-839 {createRuntime :641} stream_cif_mipi_id0 video name: /dev/video0 cmpi 00:00:04-839 {createRuntime :642} stream_cif_mipi_id1 video name: /dev/video1 cmpi 00:00:04-839 {createRuntime :643} stream_cif_mipi_id2 video name: /dev/video2 cmpi 00:00:04-839 {createRuntime :644} stream_cif_mipi_id3 video name: /dev/video3 cmpi 00:00:04-839 {createRuntime :646} sensor raw width : 2304 cmpi 00:00:04-841 {createRuntime :647} sensor raw height : 1296 cmpi 00:00:04-842 {createRuntime :648} --------------------------------------------------------- cmpi 00:00:04-842 {createRuntime :654} isp media name : /dev/media1 cmpi 00:00:04-842 {createRuntime :655} isp model name : rkisp0 cmpi 00:00:04-842 {createRuntime :656} isp driver name : rkisp-vir0 cmpi 00:00:04-842 {createRuntime :657} isp dev name : /dev/v4l-subdev3 cmpi 00:00:04-842 {createRuntime :659} isp rawrd0_m_path : /dev/video17 cmpi 00:00:04-842 {createRuntime :660} isp rawrd1_l_path : cmpi 00:00:04-842 {createRuntime :661} isp rawrd2_s_path : /dev/video18 cmpi 00:00:04-843 {createRuntime :664} mainpath video name : /dev/video11 cmpi 00:00:04-843 {createRuntime :665} selfpath video name : /dev/video12 cmpi 00:00:04-843 {createRuntime :666} bypasspath video name : /dev/video13 cmpi 00:00:04-843 {createRuntime :667} sensor link type : 2 cmpi 00:00:04-843 {createRuntime :668} sensor is united : 0 cmpi 00:00:04-843 {createRuntime :672} --------------------------------------------------------- cmpi 00:00:04-843 {createRuntime :711} [non-WRAP MODE]: buff size = 290304 RTIsp3x 00:00:04-850 {ispInitDevice :591} sensor name = m00_b_sc3336 4-0030 RTDeviceV4L2 00:00:04-859 {open :137} cameraIndex:0, entityName:rkisp_bypasspath RTDeviceV4L2 00:00:04-859 {open :143} open video name(/dev/video13) RKViChn 00:00:04-859 {setFrameRate :1469} [vi] dev(0) ch(2) illegal param s32SrcFrameRate(0) s32DstFrameRate(0) MpiAdapterEncode 00:00:04-864 {ma_encode_get_pack:2079} map ptr: 0xa3c30000, fd 67 MpiAdapterEncode 00:00:04-865 {ma_encode_get_pack:2079} map ptr: 0xa3bcc000, fd 69 [DEBUG utils.c:186:rtsp_codec_data_parse_from_user_h265] vps 23 [DEBUG utils.c:194:rtsp_codec_data_parse_from_user_h265] sps 43 [DEBUG utils.c:202:rtsp_codec_data_parse_from_user_h265] pps 9 RTDeviceV4L2 00:00:04-871 {ispCameraInfo :567} current device:/dev/video13 isn't compatible(cap:0x84201000) device,memoryType:4, retry:0 RTDeviceV4L2 00:00:04-871 {ispInitFormat :767} ioctl VIDIOC_S_FMT OK cmpi 00:00:04-871 {start :1093} =========== vi Start startRuntime =========== RTDeviceV4L2 00:00:04-871 {ispStreamOn :458} do ispStreamOn start RTDeviceV4L2 00:00:04-871 {ispStreamOn :511} do ispStreamOn done [#Start osd_time_server thread, arg:(nil) server.c][rkipc_server_thread]:#Start rkipc_server_thread thread, arg:(nil) [storage.c][rkipc_storage_set_dev_attr]:mount path is /userdata, dev_path is /dev/ubi5_0 [storage.c][rkipc_storage_para_init]:DevAttr set: AutoDel--1, FreeSizeDel--500~1000, Path--/userdata/video0, Limit--300 [storage.c][rkipc_storage_para_init]:DevAttr set: AutoDel--1, FreeSizeDel--500~1000, Path--/userdata/video1, Limit--300 [storage.c][rkipc_storage_para_init]:DevAttr set: AutoDel--1, FreeSizeDel--500~1000, Path--/userdata/video2, Limit--300 [osd.c][osd_time_server]:osd_time_id is 1 [osd.c][osd_time_server]:osd_data.text.font_color is fff799 [osd.c][osd_time_server]:osd_data.text.format is 24hour CHR-YYYY-MM-DD [storage.c][rkipc_storage_auto_delete_init]:mountpath:/userdata,devpath:,devtype:,devattr: [storage.c][rkipc_storage_file_scan_thread]:/userdata, /dev/ubi5_0, ubifs, rw,relatime,assert=read-only,ubi=5,vol=0 [storage.c][rkipc_storage_file_scan_thread]:[00:00:04.930737] i is 0, before rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:04.931030] i is 0, after rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:04.931247] i is 1, before rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:04.931483] i is 1, after rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:04.931609] i is 2, before rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:04.931744] i is 2, after rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:total_size = 916, free_size = 868 [storage.c][rkipc_storage_file_monitor_thread]:pHandle->dev_sta.mount_status is 4 cmpi 00:00:04-965 {mb_create_pool :231} allocated buffer(this=0x1e0210, data=0xa2bbb000, size=40960, id=225) cmpi 00:00:04-966 {mb_create_pool :231} allocated buffer(this=0x1eb5c8, data=0xa2bb1000, size=40960, id=226) cmpi 00:00:04-973 {attachToChn :594} The channel attr attach mapid: 0x0. cmpi 00:00:04-974 {attachToChn :594} The channel attr attach mapid: 0x0. cmpi 00:00:04-974 {attachToChn :594} The channel attr attach mapid: 0x0. [network.c][rk_network_get_cable_state]:read Cable state [network.c][rk_network_get_cable_state]: [usb0] link down [network.c][rk_network_get_cable_state]:read Cable state [network.c][rk_network_get_cable_state]: [usb0] link down [network.c][rk_network_get_cable_state]:read Cable state [network.c][rk_network_get_cable_state]: [usb0] link up route: SIOCDELRT: No such process udhcpc: started, v1.36.1 udhcpc: broadcasting discover /usr/bin/luckfox-config: line 234: warning: command substitution: ignored null byte in input Only Luckfox Pico Ultra /Luckfox Pico Ultra W support RGB udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: no lease, forking to background udhcpc: started, v1.36.1 udhcpc: broadcasting discover udhcpc: broadcasting discover Complete configuration loading /root/main.py and /root/boot.py not exist ,pass... OK hwclock: can't open '/dev/misc/rtc': No such file or directory RTC does not require time calibration udhcpc: broadcasting discover current_ip = TARGET_IP = 172.32.0.93 luckfox : set usb0 ip 172.32.0.93 usb0 config success Welcome to luckfox pico luckfox login: udhcpc: no lease, forking to background |
카메라 앞을 알짱대면 이렇게 뜬다.
| [video.c][rkipc_ivs_get_results]:MD: md_area is 184320, md_area_threshold is 55987 [video.c][rkipc_ivs_get_results]:MD: md_area is 184320, md_area_threshold is 55987 |
+
이미지 교체하고 나서 카메라 다니까 문제없이 작동한다.
이전 내역대로 신버전 vlc를 통해서 접속해야 하고 150ms 이하로 떨어지니 한번의 화면만 보이고 그 이후로 갱신되지 않는다.
크.. free 2.4M
여기서 먼가 웹 서비스 하는게 있을것 같은데 공식위키에서 좀 더 뒤져봐야 할 듯.
| [root@luckfox bin]# free -h total used free shared buff/cache available Mem: 32.9M 20.4M 2.4M 252.0K 10.1M 9.4M Swap: 0 0 0 [root@luckfox bin]# pwd /oem/usr/bin [root@luckfox bin]# ls -al total 6104 drwxrwxr-x 2 1005 1005 8096 Jun 26 2025 . drwxrwxr-x 7 1005 1005 480 Jun 12 2025 .. -rwxr-xr-x 1 1005 1005 551 May 20 2025 RkLunch-stop.sh -rwxr-xr-x 1 1005 1005 2789 May 20 2025 RkLunch.sh -rwxr-xr-x 1 1005 1005 38656 Jun 26 2025 dumpsys -rwxrwxr-x 1 1005 1005 534592 Jun 26 2025 fastboot_server -rwxrwxr-x 1 1005 1005 470356 Jun 26 2025 j2s4b_dev -rwxrwxr-x 1 1005 1005 26112 Jun 26 2025 luckfox_adc_test -rwxrwxr-x 1 1005 1005 26580 Jun 26 2025 luckfox_gpio_test -rwxrwxr-x 1 1005 1005 26124 Jun 26 2025 luckfox_i2c_test -rwxrwxr-x 1 1005 1005 26192 Jun 26 2025 luckfox_pwm_test -rwxrwxr-x 1 1005 1005 26208 Jun 26 2025 luckfox_spi_test -rwxrwxr-x 1 1005 1005 26152 Jun 26 2025 luckfox_uart_test -rwxr-xr-x 1 1005 1005 54936 Jun 26 2025 modetest -rwxrwxr-x 1 1005 1005 92904 Jun 26 2025 mpi_enc_test -rwxrwxr-x 1 1005 1005 9668 Jun 26 2025 mpp_info_test -rwxrwxr-x 1 1005 1005 26364 Jun 26 2025 rgaImDemo -rwxrwxr-x 1 1005 1005 21964 Jun 26 2025 rk_adc_test -rwxrwxr-x 1 1005 1005 21976 Jun 26 2025 rk_event_test -rwxrwxr-x 1 1005 1005 21968 Jun 26 2025 rk_gpio_test -rwxrwxr-x 1 1005 1005 21964 Jun 26 2025 rk_led_test -rwxr-xr-x 1 1005 1005 18020 Jun 26 2025 rk_mpi_adec_test -rwxr-xr-x 1 1005 1005 18024 Jun 26 2025 rk_mpi_aenc_test -rwxr-xr-x 1 1005 1005 17952 Jun 26 2025 rk_mpi_af_test -rwxr-xr-x 1 1005 1005 46920 Jun 26 2025 rk_mpi_ai_test -rwxr-xr-x 1 1005 1005 13792 Jun 26 2025 rk_mpi_amix_test -rwxr-xr-x 1 1005 1005 26304 Jun 26 2025 rk_mpi_ao_test -rwxr-xr-x 1 1005 1005 13796 Jun 26 2025 rk_mpi_avio_test -rwxr-xr-x 1 1005 1005 75700 Jun 26 2025 rk_mpi_avs_test -rwxr-xr-x 1 1005 1005 42740 Jun 26 2025 rk_mpi_dup_venc_test -rwxr-xr-x 1 1005 1005 13896 Jun 26 2025 rk_mpi_mb_test -rwxr-xr-x 1 1005 1005 13896 Jun 26 2025 rk_mpi_mmz_test -rwxr-xr-x 1 1005 1005 67628 Jun 26 2025 rk_mpi_rgn_test -rwxr-xr-x 1 1005 1005 17920 Jun 26 2025 rk_mpi_sys_test -rwxr-xr-x 1 1005 1005 22124 Jun 26 2025 rk_mpi_tde_test -rwxr-xr-x 1 1005 1005 55156 Jun 26 2025 rk_mpi_venc_test -rwxr-xr-x 1 1005 1005 30424 Jun 26 2025 rk_mpi_vi_dup_test -rwxr-xr-x 1 1005 1005 63352 Jun 26 2025 rk_mpi_vi_test -rwxr-xr-x 1 1005 1005 55108 Jun 26 2025 rk_mpi_vpss_test -rwxrwxr-x 1 1005 1005 21972 Jun 26 2025 rk_pwm_test -rwxr-xr-x 1 1005 1005 21812 Jun 26 2025 rk_rve_sample_test -rwxrwxr-x 1 1005 1005 21964 Jun 26 2025 rk_system_test -rwxrwxr-x 1 1005 1005 21964 Jun 26 2025 rk_time_test -rwxrwxr-x 1 1005 1005 21984 Jun 26 2025 rk_watchdog_test -rwxrwxr-x 1 1005 1005 18032 Jun 26 2025 rkaiq_3A_server -rwxrwxr-x 1 1005 1005 302132 Jun 26 2025 rkaiq_tool_server -rwxr-xr-x 1 1005 1005 457488 Jun 26 2025 rkipc -rwxrwxr-x 1 1005 1005 204140 Jun 26 2025 rkisp_demo -rwxrwxr-x 1 1005 1005 9596 Jun 26 2025 sample_ai -rwxrwxr-x 1 1005 1005 13872 Jun 26 2025 sample_ai_aenc -rwxrwxr-x 1 1005 1005 22072 Jun 26 2025 sample_ai_aenc_adec_ao_stresstest -rwxrwxr-x 1 1005 1005 22096 Jun 26 2025 sample_avs -rwxrwxr-x 1 1005 1005 38808 Jun 26 2025 sample_avs_stresstest -rwxrwxr-x 1 1005 1005 125408 Jun 26 2025 sample_demo_aiisp -rwxrwxr-x 1 1005 1005 137740 Jun 26 2025 sample_demo_aiisp_stresstest -rwxrwxr-x 1 1005 1005 121252 Jun 26 2025 sample_demo_dual_aiisp -rwxrwxr-x 1 1005 1005 133580 Jun 26 2025 sample_demo_dual_aiisp_stresstest -rwxrwxr-x 1 1005 1005 100400 Jun 26 2025 sample_demo_dual_camera -rwxrwxr-x 1 1005 1005 104520 Jun 26 2025 sample_demo_dual_camera_wrap -rwxrwxr-x 1 1005 1005 100364 Jun 26 2025 sample_demo_multi_camera_eptz -rwxrwxr-x 1 1005 1005 117144 Jun 26 2025 sample_demo_vi_avs_venc -rwxrwxr-x 1 1005 1005 121264 Jun 26 2025 sample_demo_vi_avs_venc_stresstest -rwxrwxr-x 1 1005 1005 125364 Jun 26 2025 sample_demo_vi_venc -rwxrwxr-x 1 1005 1005 137720 Jun 26 2025 sample_demo_vi_venc_stresstest -rwxrwxr-x 1 1005 1005 30504 Jun 26 2025 sample_isp_stresstest -rwxrwxr-x 1 1005 1005 34612 Jun 26 2025 sample_mulit_isp_stresstest -rwxrwxr-x 1 1005 1005 22268 Jun 26 2025 sample_multi_vi -rwxrwxr-x 1 1005 1005 30580 Jun 26 2025 sample_multi_vi_avs -rwxrwxr-x 1 1005 1005 121300 Jun 26 2025 sample_multi_vi_avs_osd_venc -rwxrwxr-x 1 1005 1005 112980 Jun 26 2025 sample_rgn_stresstest -rwxrwxr-x 1 1005 1005 108840 Jun 26 2025 sample_rv1103_dual_memory_opt -rwxrwxr-x 1 1005 1005 108624 Jun 26 2025 sample_venc_stresstest -rwxrwxr-x 1 1005 1005 22260 Jun 26 2025 sample_vi -rwxrwxr-x 1 1005 1005 113032 Jun 26 2025 sample_vi_vpss_osd_venc -rwxrwxr-x 1 1005 1005 34680 Jun 26 2025 sample_vpss_stresstest -rwxrwxr-x 1 1005 1005 9612 Jun 26 2025 simple_adec_bind_ao -rwxrwxr-x 1 1005 1005 13820 Jun 26 2025 simple_adec_bind_ao_external_decoder -rwxrwxr-x 1 1005 1005 9584 Jun 26 2025 simple_ai_bind_aenc -rwxrwxr-x 1 1005 1005 13720 Jun 26 2025 simple_ai_bind_aenc_external_encoder -rwxrwxr-x 1 1005 1005 13720 Jun 26 2025 simple_ai_get_frame -rwxrwxr-x 1 1005 1005 9600 Jun 26 2025 simple_ao_send_frame -rw-rw-r-- 1 1005 1005 9683 Jun 26 2025 simple_cmd.txt -rwxrwxr-x 1 1005 1005 9580 Jun 26 2025 simple_vi_bind_ivs -rwxrwxr-x 1 1005 1005 9672 Jun 26 2025 simple_vi_bind_venc -rwxrwxr-x 1 1005 1005 13752 Jun 26 2025 simple_vi_bind_venc_change_resolution_rv1106 -rwxrwxr-x 1 1005 1005 13780 Jun 26 2025 simple_vi_bind_venc_chn_sharebuf_rv1106 -rwxrwxr-x 1 1005 1005 17984 Jun 26 2025 simple_vi_bind_venc_combo_rv1106 -rwxrwxr-x 1 1005 1005 9680 Jun 26 2025 simple_vi_bind_venc_jpeg -rwxrwxr-x 1 1005 1005 13788 Jun 26 2025 simple_vi_bind_venc_osd -rwxrwxr-x 1 1005 1005 83732 Jun 26 2025 simple_vi_bind_venc_rtsp -rwxrwxr-x 1 1005 1005 83752 Jun 26 2025 simple_vi_bind_venc_rtsp_dev_chn_sharebuf_rv1106 -rwxrwxr-x 1 1005 1005 83744 Jun 26 2025 simple_vi_bind_venc_rtsp_eptz -rwxrwxr-x 1 1005 1005 83756 Jun 26 2025 simple_vi_bind_venc_rtsp_three_camera_rv1106 -rwxrwxr-x 1 1005 1005 84052 Jun 26 2025 simple_vi_bind_venc_svc_rtsp -rwxrwxr-x 1 1005 1005 13780 Jun 26 2025 simple_vi_bind_venc_wrap_rv1106 -rwxrwxr-x 1 1005 1005 13796 Jun 26 2025 simple_vi_bind_vpss_bind_venc -rwxrwxr-x 1 1005 1005 9636 Jun 26 2025 simple_vi_get_frame -rwxrwxr-x 1 1005 1005 13884 Jun 26 2025 simple_vi_get_frame_rkaiq -rwxrwxr-x 1 1005 1005 9628 Jun 26 2025 simple_vi_get_frame_send_vo_rv1106 -rwxrwxr-x 1 1005 1005 13880 Jun 26 2025 simple_vi_get_frame_tde -rwxrwxr-x 1 1005 1005 13696 Jun 26 2025 vpu_api_test [root@luckfox bin]# grep -rni http . ./j2s4b_dev:24024:not enough space for format expansion (Please submit full bug report at https://gcc.gnu.org/bugs/): ./rk_mpi_vi_test:9609:http:// ./rk_mpi_vi_test:9610:https:// ./rk_mpi_vi_dup_test:5474:http:// ./rk_mpi_vi_dup_test:5475:https:// ./rk_mpi_rgn_test:10174:http:// ./rk_mpi_rgn_test:10175:https:// ./rk_mpi_avs_test:11469:http:// ./rk_mpi_avs_test:11470:https:// ./rk_mpi_vpss_test:8634:http:// ./rk_mpi_vpss_test:8635:https:// |
+
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Pi/MPI/]
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Plus-Mini/CSI-Camera/]
'embeded > luckfox' 카테고리의 다른 글
| luckfox pico mini - ubuntu 이미지, 윈도우에서 굽기 (0) | 2026.09.08 |
|---|---|
| luckfox pico plus (0) | 2026.09.07 |
| luckfox pico ultra - rknn 예제 (0) | 2026.04.27 |
| luckfox pico ultra 카메라 모션 디텍트 끄기 (0) | 2026.04.27 |
| luckfox pico ultra - rv1106 riscv (0) | 2026.04.24 |
하드웨어/logic analyzer2026. 9. 8. 10:20
작동은 3.3V
GPIO 입력 범위는 5V. RS232 같은거 아닌 i2c / ttl uart 등은 문제없이 볼 수 있겠네
high는 2~5.25V 라서 1.8 / 1.3V TTL은 무리고 3.3V 쪽까지는 무리없어 보인다.
'하드웨어 > logic analyzer' 카테고리의 다른 글
| CY7C68013A on linux (0) | 2026.09.07 |
|---|---|
| sigrok(pulseview) + CY7C68013A (0) | 2026.09.07 |
| EZ-USB FX2LP CY7C68013A (0) | 2026.09.03 |
하드웨어/logic analyzer2026. 9. 7. 17:30
ez-usb 를 리눅스에서 어떻게 하지 찾아보는 중.
일단은 plugdev로 인식시키면 되는건가?
요게 영향을 주는진 모르겠다.
| sudo usermod -a -G plugdev $(whoami) sudo vim /etc/udev/rules.d/99-ezusb.rules ATTRS{idVendor}=="04b4", ATTRS{idProduct}=="8613", MODE="660", GROUP="plugdev", TAG+="uaccess" sudo udevadm control --reload-rules sudo udevadm trigger |
[링크 : https://github.com/mbed-ce/fxload]
+
2026.09.06
패키지를 두 개 설치해야 한다.
요건 pulseview gui 프로그램
| $ sudo apt-cache search pulseview pulseview - sigrok logic analyzer, oscilloscope, and MSO GUI |
요건 fx2lafw 펌웨어 패키지
| $ sudo apt-cache search fx2lafw sigrok-firmware-fx2lafw - Firmware for Cypress FX2(LP) based logic analyzers |
윈도우는 짧던데.. 싶어서 다시 보니 윈도우는 장치목록이 스크롤 생겨서 그랬던 듯.
fx2lafw를 선택한다
scan 하면 똭!
음 좋아좋아 잘되네
+
만약에 이런 에러가 난다면 펌웨어 패키지 없어서 그러니, 가장 위의 패키지 중 펌웨러를 설치해보면 될 듯.
| $ pulseview Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. sr: resource: Failed to open resource 'fx2lafw-cypress-fx2.fw' (use loglevel 5/spew for details). sr: fx2lafw: Firmware upload failed for device 1.43 (logical), name fx2lafw-cypress-fx2.fw. sr: fx2lafw: Unable to get version info: LIBUSB_ERROR_TIMEOUT. sr: fx2lafw: Failed to get firmware version. sr: fx2lafw: Unable to open device. Notifying user of session error: "generic/unspecified error" |
'하드웨어 > logic analyzer' 카테고리의 다른 글
| CY7C68013A 입력 전압범위 (0) | 2026.09.08 |
|---|---|
| sigrok(pulseview) + CY7C68013A (0) | 2026.09.07 |
| EZ-USB FX2LP CY7C68013A (0) | 2026.09.03 |
하드웨어/logic analyzer2026. 9. 7. 16:49
이전에 구매했던 로직 애널라이저용 프로그램이 먼가 해서 찾아보는데
pulseview 라는 프로그램을 쓰고 있다.
fx2law 라고 뜨는 드라이버를 어디서 받나..
[링크 : https://m.blog.naver.com/mymissu/221387059280]
보드는 아래와 같고, cypress FX2(LP) 개발보드인데 saleae logic의 클론이라고.
Lcsoft CY7C68013A Mini Board
[링크 : https://sigrok.org/wiki/Lcsoft_Mini_Board]
linux / window / mac 지원하는데 sigrok-cli도 한번 살펴는 봐야겠다.
[링크 : https://sigrok.org/wiki/Downloads]
드라이버 안깔고 교체는 되는데 이름이 unknown device #1 이라고 나와버림.
이름만 바꾸면 되려나?
zadig가 포함되어있진 않다.
zadig에서 드라이버 설치하기 전에는 이렇게 "scan for devices using driver above" 버튼을 눌러도 아무것도 안뜨는데
zadig에서 winusb로 교체하고 나서 scan을 누르면 cypress FX2 with 16 channels 라고 뜬다.
하고나서 보니 fx2lafw 라고 이름이 바뀌어있다. 아까는 그냥 이상한 이름이더니 머냐?
PORT B / PORT D 순서로 채널이 사용가능하고 총 16채널
[링크 : https://forum.hobbycomponents.com/viewtopic.php?t=1891]
[링크 : http://myfreescalewebpage.free.fr/toolbox/logic/logic.htm]
PB4/PB6 에서 gnd랑 쇼트 시키기
PD5/PD7 에서 gnd랑 쇼트 시키기
+
2026.09.08
Jumper InstructionJumper cap of 24C128: controlling the ability of data reading and writing. Plug in the cap, AT24C128 is closed; remove it, AT24C128 is started.Jumper cap of D1, D2: controlling the power of LED light. Plug in the cap, the anode of LED 1 and 2 will be connected to the positive pole of power source through resistance. Remove the cap, the anode of D1 and D2 will be open. |
'하드웨어 > logic analyzer' 카테고리의 다른 글
| CY7C68013A 입력 전압범위 (0) | 2026.09.08 |
|---|---|
| CY7C68013A on linux (0) | 2026.09.07 |
| EZ-USB FX2LP CY7C68013A (0) | 2026.09.03 |
Linux/Ubuntu2026. 9. 7. 15:00
claude에게 festival로 한글 발음 해달라고 시키니 추천해준 프로그램
[링크 : https://discuss.pytorch.kr/t/espeak-ng-100-espeak-fork/4272]
[링크 : https://github.com/espeak-ng/espeak-ng]
teensy 4.0 보드를 위한 (cortex-M7@600Mhz) 포트가 있다고 하는데.. 아니 그 가격(5만원)이면 라즈베리 에서 돌리는게 쌀지도?
[링크 : https://github.com/vindar/espeak-ng_T4/]
[링크 : https://forum.pjrc.com/index.php?threads/espeak-ng-tts-library-ported-to-teensy-4.77001/]
근데 -v ko 있나 없나 영어식 발음인건 여전한데...?
-p 50 -s 175 이 기본이고
-p 는 0~99 사이값.
-s는 분당 단어 갯수라 딱히 제한은 없는듯?
| $ espeak-ng "hello" $ espeak-ng "안녕하세요" $ espeak-ng -v ko "안녕하세요" $ espeak-ng -v ko -p 70 -s 300 "안녕하세요" |
| $ espeak-ng --help eSpeak NG text-to-speech: 1.50 Data at: /usr/lib/x86_64-linux-gnu/espeak-ng-data espeak-ng [options] ["<words>"] -f <text file> Text file to speak --stdin Read text input from stdin instead of a file If neither -f nor --stdin, then <words> are spoken, or if none then text is spoken from stdin, each line separately. -a <integer> Amplitude, 0 to 200, default is 100 -d <device> Use the specified device to speak the audio on. If not specified, the default audio device is used. -g <integer> Word gap. Pause between words, units of 10mS at the default speed -k <integer> Indicate capital letters with: 1=sound, 2=the word "capitals", higher values indicate a pitch increase (try -k20). -l <integer> Line length. If not zero (which is the default), consider lines less than this length as end-of-clause -p <integer> Pitch adjustment, 0 to 99, default is 50 -s <integer> Speed in approximate words per minute. The default is 175 -v <voice name> Use voice file of this name from espeak-ng-data/voices -w <wave file name> Write speech to this WAV file, rather than speaking it directly -b Input text encoding, 1=UTF8, 2=8 bit, 4=16 bit -m Interpret SSML markup, and ignore other < > tags -q Quiet, don't produce any speech (may be useful with -x) -x Write phoneme mnemonics to stdout -X Write phonemes mnemonics and translation trace to stdout -z No final sentence pause at the end of the text --compile=<voice name> Compile pronunciation rules and dictionary from the current directory. <voice name> specifies the language --compile-debug=<voice name> Compile pronunciation rules and dictionary from the current directory, including line numbers for use with -X. <voice name> specifies the language --compile-mbrola=<voice name> Compile an MBROLA voice --compile-intonations Compile the intonation data --compile-phonemes=<phsource-dir> Compile the phoneme data using <phsource-dir> or the default phsource directory --ipa Write phonemes to stdout using International Phonetic Alphabet --path="<path>" Specifies the directory containing the espeak-ng-data directory --pho Write mbrola phoneme data (.pho) to stdout or to the file in --phonout --phonout="<filename>" Write phoneme output from -x -X --ipa and --pho to this file --punct="<characters>" Speak the names of punctuation characters during speaking. If =<characters> is omitted, all punctuation is spoken. --sep=<character> Separate phonemes (from -x --ipa) with <character>. Default is space, z means ZWJN character. --split=<minutes> Starts a new WAV file every <minutes>. Used with -w --stdout Write speech output to stdout --tie=<character> Use a tie character within multi-letter phoneme names. Default is U+361, z means ZWJ character. --version Shows version number and date, and location of espeak-ng-data --voices=<language> List the available voices for the specified language. If <language> is omitted, then list all voices. --load Load voice from a file in current directory by name. -h, --help Show this help. |
'Linux > Ubuntu' 카테고리의 다른 글
| festival lite TTS (0) | 2026.09.07 |
|---|---|
| ubuntu 22.04 24.04 설치 파티션 차이 (0) | 2026.07.09 |
| hp 2760p 우분투 26.02 설치 실패 (0) | 2026.06.23 |
| ubuntu 26.04 + 595.71.05 + CUDA 13.2 (0) | 2026.06.17 |
| festival - a text-to-speech system(TTS) (0) | 2026.05.06 |
Linux/Ubuntu2026. 9. 7. 14:45
festival이 무거워서 가벼운 버전으로 만든거라는데..
mcu에서 돌릴수 있을 정도로 가벼운진 모르겠다.
[링크 : https://github.com/festvox/flite]
플래시가 좀 많이 필요한데 일단 esp32에서 돌아가는 듯?
'Linux > Ubuntu' 카테고리의 다른 글
| espeak-ng TTS (0) | 2026.09.07 |
|---|---|
| ubuntu 22.04 24.04 설치 파티션 차이 (0) | 2026.07.09 |
| hp 2760p 우분투 26.02 설치 실패 (0) | 2026.06.23 |
| ubuntu 26.04 + 595.71.05 + CUDA 13.2 (0) | 2026.06.17 |
| festival - a text-to-speech system(TTS) (0) | 2026.05.06 |
embeded/luckfox2026. 9. 7. 10:25
중간 결과
- rndis 연결 실패
- uart 아니고 ttl
- 카메라 연결하면 정상부팅 못함 (SC3336 , 3MP)
pico ultra는 256MB / 8GB, 5M@30p 인데 반해
pico plus는 64MB / 128MB, 4M@30p 이다.
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Plus-Mini]
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Ultra/]
boot 안누르고 켜면 usb쪽은 전원만 공급되고 별다른 메시지나 tty 장치로 인식되진 않는다.
로그 보려면 결국에는 ttl 2 usb가 있어야 한단 말인데..
| [ 1078.331129] usb 1-2: new high-speed USB device number 10 using xhci_hcd [ 1078.459427] usb 1-2: New USB device found, idVendor=2207, idProduct=110c, bcdDevice= 1.00 [ 1078.459446] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
이상하게 먼가 걸려있다가 늦게 뜬다. 머지?
| $ lsusb -v -d 2207:110c Bus 001 Device 010: ID 2207:110c Fuzhou Rockchip Electronics Company Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2207 Fuzhou Rockchip Electronics Company idProduct 0x110c bcdDevice 1.00 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 6 bInterfaceProtocol 5 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 cannot read device status, Resource temporarily unavailable (11) |
boot 누르지 않고 부팅시에는 아래와 같이 rndis가 뜬다.
| [ 1249.278957] usb 1-2: new high-speed USB device number 11 using xhci_hcd [ 1249.406378] usb 1-2: New USB device found, idVendor=2207, idProduct=0019, bcdDevice= 3.10 [ 1249.406397] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1249.406405] usb 1-2: Product: rk3xxx [ 1249.406410] usb 1-2: Manufacturer: rockchip [ 1249.406415] usb 1-2: SerialNumber: ca8ebbd389df2126 [ 1249.473826] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, e6:cd:d4:2b:60:c6 [ 1249.474223] usbcore: registered new interface driver rndis_host [ 1249.484915] rndis_host 1-2:1.0 enxe6cdd42b60c6: renamed from usb0 |
읭.. 아이피 안 잡히는데?
| $ ifconfig enxe6cdd42b60c6: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::201f:ab45:678e:15d5 prefixlen 64 scopeid 0x20<link> ether e6:cd:d4:2b:60:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
음.. 장치식별자가 다르게 떴네?
| $ lsusb -v -d 2207:0019 Bus 001 Device 011: ID 2207:0019 Fuzhou Rockchip Electronics Company rk3xxx Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2207 Fuzhou Rockchip Electronics Company idProduct 0x0019 bcdDevice 3.10 iManufacturer 1 rockchip iProduct 2 rk3xxx iSerial 3 ca8ebbd389df2126 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0062 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 4 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 224 Wireless bFunctionSubClass 1 Radio Frequency bFunctionProtocol 3 RNDIS iFunction 7 RNDIS Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 3 RNDIS iInterface 5 RNDIS Communications Control ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 01 ** UNRECOGNIZED: 04 24 02 00 ** UNRECOGNIZED: 05 24 06 00 01 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 6 RNDIS Ethernet Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 9 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) |
---
부트로그
판매된 상태 그대로 해봤는데 root/luckfox. buildroot 버전으로 되어있나 보다
| DDR V1.10 ec2fae0c96 wesley.yao 22/11/15-10:58:09 S5P1 fc27 F DDRConf1 DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Die BW=16 Size=64MB 528MHz DDR bin out U-Boot SPL board init U-Boot SPL 2017.09 (Jul 10 2024 - 15:27:08) unrecognized JEDEC id bytes: ff, ef, aa Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 2 spl: mmc init failed with error: -123 Trying to boot from MTD1 ENVF: Primary 0x00000000 - 0x00040000 ENVF: OK Trying fit image at 0x400 sector ## Verified-boot: 0 ## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(c2f767e435...) + shaK ## Checking fdt 0x0025bed0 ... sha256(51bba657c3...) + OK Total: 241.332 ms Jumping to U-Boot(0x00200000) U-Boot 2017.09 (Jul 10 2024 - 15:27:08 +0800) Model: Rockchip RV1106 EVB Board PreSerial: 2, raw, 0xff4c0000 DRAM: 64 MiB Sysmem: init Relocation Offset: 03d85000 Relocation fdt: 02dfacb0 - 02dfede0 CR: M/C/I Using default environment Bootdev(atags): mtd 1 ENVF: Primary 0x00000000 - 0x00040000 ENVF: OK PartType: ENV DM: v2 No misc partition boot mode: normal FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK Model: Luckfox Pico Plus CLK: (uboot. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz aclk_peri_root 400000 KHz hclK_peri_root 200000 KHz pclk_peri_root 100000 KHz aclk_bus_root 300000 KHz pclk_top_root 100000 KHz pclk_pmu_root 100000 KHz hclk_pmu_root 200000 KHz Net: eth0: ethernet@ffa80000 Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image at 0x290da80 with size 0x002ec200 Fdt Ramdisk skip relocation No misc partition ## Loading kernel from FIT Image at 0290da80 ... Using 'conf' configuration ## Verified-boot: 0 Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x02916a80 Data Size: 3027200 Bytes = 2.9 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: sha256 Hash value: 66929aa0a4d3f91d2b47fa6dae6865e75d0a7a606cda288fb10179af657e7 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 0290da80 ... Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x0290e280 Data Size: 34771 Bytes = 34 KiB Architecture: ARM Load Address: 0x00c00000 Hash algo: sha256 Hash value: 3692950246bab0e95c7f3f38c32aeedfaf37f07237d386d6a68d993ddadc1 Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x0290da80 to 0x00c00000 Booting using the fdt blob at 0x00c00000 Loading Kernel Image from 0x02916a80 to 0x00008000 ... OK kernel loaded at 0x00008000, end = 0x002eb100 Using Device Tree in place at 00c00000, end 00c0b7d2 Adding bank: 0x00000000 - 0x04000000 (size: 0x04000000) Total: 602.555 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.110 (hxj@luckfox-System-Product-Name) (arm-ro4 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] OF: fdt: Machine model: Luckfox Pico Plus [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 24576 KiB at 0x02800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: user_debug=31 storagemedia=mtd androidboot.) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, li) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, lin) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 33684K/65536K available (3784K kernel code, 319K rwdata,) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x1fb/0x360 wi0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s [ 0.000019] Switching to timer-based delay loop, resolution 41ns [ 0.000421] Console: colour dummy device 80x30 [ 0.000467] Calibrating delay loop (skipped), value calculated using timer f) [ 0.000485] pid_max: default: 4096 minimum: 301 [ 0.000658] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line) [ 0.000674] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,) [ 0.001297] CPU: Testing write buffer coherency: ok [ 0.001837] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.002257] devtmpfs: initialized [ 0.009055] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 [ 0.009246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.009270] futex hash table entries: 16 (order: -5, 192 bytes, linear) [ 0.009362] pinctrl core: initialized pinctrl subsystem [ 0.010224] NET: Registered protocol family 16 [ 0.010665] DMA: failed to allocate 0 KiB pool for atomic coherent allocation [ 0.011467] thermal_sys: Registered thermal governor 'step_wise' [ 0.011476] thermal_sys: Registered thermal governor 'user_space' [ 0.011728] cpuidle: using governor menu [ 0.011762] Registered FIQ tty driver [ 0.024771] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000 [ 0.025554] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000 [ 0.026294] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000 [ 0.027025] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000 [ 0.027134] rockchip-pinctrl pinctrl: probed pinctrl [ 0.036453] fiq_debugger fiq_debugger.0: IRQ uart_irq not found [ 0.036477] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 0.036761] printk: console [ttyFIQ0] enabled [ 0.036993] Registered fiq debugger ttyFIQ0 [ 0.039062] SCSI subsystem initialized [ 0.039294] usbcore: registered new interface driver usbfs [ 0.039344] usbcore: registered new interface driver hub [ 0.039395] usbcore: registered new device driver usb [ 0.039642] mc: Linux media interface: v0.10 [ 0.039689] videodev: Linux video capture interface: v2.00 [ 0.040866] Advanced Linux Sound Architecture Driver Initialized. [ 0.041629] rockchip-cpuinfo cpuinfo: SoC : 11031000 [ 0.041653] rockchip-cpuinfo cpuinfo: Serial : 3c6d8f8ee95e4dd0 [ 0.042024] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: prob! [ 0.042808] clocksource: Switched to clocksource arch_sys_counter [ 0.050354] NET: Registered protocol family 2 [ 0.050543] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linea) [ 0.051023] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096) [ 0.051080] TCP established hash table entries: 1024 (order: 0, 4096 bytes, ) [ 0.051111] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051132] TCP: Hash tables configured (established 1024 bind 1024) [ 0.051256] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.051301] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.051451] NET: Registered protocol family 1 [ 0.051964] RPC: Registered named UNIX socket transport module. [ 0.051984] RPC: Registered udp transport module. [ 0.051992] RPC: Registered tcp transport module. [ 0.051999] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.053222] Initialise system trusted keyrings [ 0.053455] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.057550] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.058376] NFS: Registering the id_resolver key type [ 0.058447] Key type id_resolver registered [ 0.058465] Key type id_legacy registered [ 0.058531] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.059024] Key type asymmetric registered [ 0.059051] Asymmetric key parser 'x509' registered [ 0.059077] io scheduler mq-deadline registered [ 0.059543] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found [ 0.064429] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-0 [ 0.064461] dma-pl330 ff420000.dma-controller: DBUFF-128x8bytes Num_Ch6 [ 0.065317] rockchip-pvtm ff240000.pvtm: pvtm@0 probed [ 0.065537] rockchip-pvtm ff390000.pvtm: pvtm@0 probed [ 0.066165] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.071109] random: fast init done [ 0.071252] random: crng init done [ 0.082400] brd: moduleSeeding 2048 bits and crediting loSaving 2048 bits of creditable seed for next boot aded [ 0.089031] loop: module loaded [ 0.091499] spi-nand spi2.0: Winbond SPI NAND was found. [ 0.091529] spi-nand spi2.Starting syslogd: 0: 128 MiB, block size: 128 KiB,4 [ 0.092911] 7 cmdlinepart partitions found oOK n MTD device spi-nand0 [ 0.092933] Creating 7 MTD partitions on "spi-nand0": [ 0.092965] 0x000000000000-0x000000040000 : "env" [ 0.094955] 0x000000040000-0x000000080000 Starting klogd: : "idblock" [ 0.097043] 0x000000080000-0x000000100000 : "uboot" [ 0.098950] 0OK x000000100000-0x000000500000 : "boot" [ 0.101077] 0x000000500000-0x000002300000 : "oem" [ 0.103210] 0x000002300000-0x000002d00000 : "userdata" [ 0.105286] 0x000002d00000-0x000007d00000 : "rootfs" [ 0.108812] rk_gmac-dwmac ffa80000.ethernet: IRQ eth_lpi not found [ 0.109010] rk_gmac-dwmac ffa80000.ethernet: PTP uses main clocRunning sysctk [ 0.109067] rk_gmac-dwmac ffa80000.ethernet: no regulator found [ 0.109083] rk_gmac-dwmac ffa80000.ethernet: clock input or output? (input). [ 0.109093] rk_gmac-dwmac ffa80000.ethernet: Can not read property: tx_delay. [ 0.109103] rk_gmac-dwmac ffa80000.ethernet: set tx_delay to 0xffffffff [ 0.109112] rk_gmac-dwmac ffa80000.ethernet: Can not read property: rx_delay. [ 0.109121] rk_gmac-dwmac ffa80000.ethernet: set rx_delay to 0xffffffff [ 0.109197] rk_gmac-dwmac ffa80000.ethernet: integrated PHY? (yes). [ 0.109214] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_rx [ 0.109227] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_tx [ 0.109258] rk_gmac-dwmac ffa80000.ethernet: cannot get clock clk_mac_speed [ 0.109267] rk_gmac-dwmac ffa80000.ethernet: clock input froOK m PHY [ 0.109534] rk_gmac-dwmac ffa80000.ethernet: init for RMII [ 0.109761] rk_gmac-dwmac ffa80000.ethernet: UserPopulating /dev using udev:1 [ 0.109794] rk_gmac-dwmac ffa80000.ethernet: DWMAC4/5 [ 0.109808] rk_gmac-dwmac ffa80000.ethernet: DMA HW capability register suppd [ 0.109819] rk_gmac-dwmac ffa80000.ethernet: RX Checksum Offload Engine suppd [ 0.109827] rk_gmac-dwmac ffa80000.ethernet: TX Checksum insertion supported [ 0.109835] rk_gmac-dwmac ffa80000.ethernet: Wake-Up On Lan supported [ 0.109843] rk_gmac-dwmac ffa80000.ethernet: TSO supported [ 0.109851] rk_gmac-dwmac ffa80000.ethernet: Enable RX Mitigation via HW Watr [ 0.109860] rk_gmac-dwmac ffa80000.ethernet: TSO feature enabled [ 0.109872] rk_gmac-dwmac ffa80000.ethernet: Using 40 bits DMA width [ 0.117749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.118161] usbcore: registered new interface driver usb-storage [ 0.118386] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.118449] Mass Storage Function, version: 2009/09/11 [ 0.118474] LUN: removable file: (no medium) [ 0.118514] no file given for LUN0 [ 0.118570] udc ffb00000.usb: failed to start g_mass_storage: -22 [ 0.119107] i2c /dev entries driver [ 0.120691] i2c i2c-4: 1 i2c clients have been registered at 0x30 [ 0.121160] i2c i2c-4: 2 i2c clients have been registered at 0x30 [ 0.122325] usbcore: registered new interface driver uvcvideo [ 0.122348] USB Video Class driver (1.1.1) [ 0.123675] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully! [ 0.125184] cpu cpu0: failed to register system monitor [ 0.125703] Synopsys Designware Multimedia Card Interface Driver [ 0.126748] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode. [ 0.126815] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller. [ 0.126834] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a [ 0.126885] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 47,32 bit o [ 0.128103] dtbocfg: 0.1.0 [ 0.128179] dtbocfg: OK [ 0.130541] rv1106-acodec ff480000.acodec: current soc_id: rv1103 [ 0.130669] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_0 [ 0.132603] NET: Registered protocol family 17 [ 0.132727] Key type dns_resolver registered [ 0.133787] Loading compiled-in X.509 certificates [ 0.134519] [ 0.134559] ***************************************************************** [ 0.134569] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE * [ 0.134576] ** * [ 0.134582] ** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNE* [ 0.134588] ** * [ 0.134595] ** This means that this kernel is built to expose clk operations* [ 0.134602] ** such as parent or rate setting, enabling, disabling, etc. * [ 0.134607] ** to userspace, which may compromise security on your system. * [ 0.134614] ** * [ 0.134620] ** If you see this message and you are not debugging the * [ 0.134626] ** kernel, report this immediately to your vendor! * [ 0.134633] ** * [ 0.134639] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE * [ 0.134646] ***************************************************************** [ 0.139659] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,) [ 0.155143] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 0.224541] ubi0: attaching mtd6 [ 0.410622] ubi0: scanning is finished [ 0.415841] ubi0: attached mtd6 (name "rootfs", size 80 MiB) [ 0.415870] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.415880] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.415889] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.415907] ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0 [ 0.415918] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 0.415929] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image seq0 [ 0.415940] ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved0 [ 0.417286] ALSA device list: [ 0.417324] #0: rv-acodec [ 0.417997] ubi0: background thread "ubi_bgt0d" started, PID 54 [ 0.418278] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 0.458242] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rooe [ 0.458274] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O s [ 0.458288] UBIFS (ubi0:0): FS size: 76820480 bytes (73 MiB, 605 LEBs), jour) [ 0.458298] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 0.458311] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID C0F1l [ 0.459698] VFS: Mounted root (ubifs filesystem) readonly on device 0:14. [ 0.461056] devtmpfs: mounted [ 0.461292] Freeing unused kernel memory: 200K [ 0.461311] Kernel memory protection not selected by kernel config. [ 0.461349] Run /sbin/init as init process [ 0.470270] process '/bin/busybox' started with executable stack [ 0.553321] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 57 [ 0.865309] udevd[87]: starting version 3.2.7 [ 0.883630] udevd[87]: specified group 'input' unknown [ 0.884758] udevd[87]: specified group 'kvm' unknown [ 0.911391] udevd[88]: starting eudev-3.2.7 [ 1.423720] udevd[99]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dy [ 1.424925] udevd[98]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dy [ 1.430435] udevd[100]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 1.460574] udevd[105]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 1.473155] udevd[106]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 1.478034] udevd[107]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y [ 1.485157] udevd[108]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /y done /etc/init.d/S20linkmount info: mount point path [IGNORE] not found, skip... ***********/dev/ubi4_0 not exist*********** ***********/dev/ubi4 not exist*********** [ 1.923025] ubi4: attaching mtd4 [ 1.993176] ubi4: scanning is finished [ 2.002030] ubi4: attached mtd4 (name "oem", size 30 MiB) [ 2.002062] ubi4: PEB size: 131072 UBI device numbebytr 4, total 240 LEBs (3) es (128 KiB), LEB size: 126976 bytes [ 2.002072] ubi4: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.002081] ubi4: VID header offset: 2048 (aligned 204try to make volume: /d. 8), data offset: 4096 [ 2.002090] ubi4: good PEBs: 240, bad PEBs: 0, corrupted PEBs: 0ubimkvol: er" [ 2.002100] ubi4: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 2.002109] ubi4: max/mean erase counter: 2/0, WL threshold: 4096, image seq0 [ 2.002121] ubi4: available PEBs: 0, total reserved PEBs: 240, PEBs reserved0 [ 2.004817] ubi4: background thread "ubi_bgt4d" started, PID 128 [ 2.054562] UBIFS (ubi4:0): Mounting in unauthenticated mode [ 2.054835] UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 133 [ 2.090346] UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "oem" [ 2.090378] UBIFS (ubi4:0): LEB size: 126976 bytes (124 KiB), min./max. I/O s [ 2.090391] UBIFS (ubi4:0): FS size: 26157056 bytes (24 MiB, 206 LEBs), jour) [ 2.090400] UBIFS (ubi4:0): reserved for root: 0 bytes (0 KiB) [ 2.090414] UBIFS (ubi4:0): media format: w4/r0 (latest is w5/r0), UUID 1631* ***********/dev/ubi5 not exist*********** LPT model [ 2.145543] ubi5: attaching mtd5 [ 2.169507] ubi5: scanning is finished [ 2.178203] ubi5: attached mtd5 (name "userdata", size 10 MiB) [ 2.178233] ubi5: PEUBI device number 5, total 80 LEBBs (10158080 bytes, 9.7) ze: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.178243] ubi5: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.178252] ubi5: VID headertry to make volume: /dev/ubi5_0 ... offset: 2048 (aligned 2048), data offseubimkvol: error!: bad volume size: "0" t: 4096 [ 2.178261] ubi5: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 2.178270] ubi5: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 2.178280] ubi5: max/mean erase counter: 2/1, WL threshold: 4096, image seq0 [ 2.178291] ubi5: available PEBs: 0, total reserved PEBs: 80, PEBs reserved 0 [ 2.183510] ubi5: background thread "ubi_bgt5d" started, PID 142 [ 2.224482] UBIFS (ubi5:0): Mounting in unauthenticated mode [ 2.224771] UBIFS (ubi5:0): background thread "ubifs_bgt5_0" started, PID 147 [ 2.273879] UBIFS (ubi5:0): UBIFS: mounted UBI device 5, volume 0, name "use" [ 2.273918] UBIFS (ubi5:0): LEB size: 126976 bytes (124 KiB), min./max. I/O s [ 2.273932] UBIFS (ubi5:0): FS size: 5840896 bytes (5 MiB,Initializing rando) [ 2.273941] UBIFS (ubi5:0): reserved for root: 0 bytes (0 KiB) [ 2.273954] UBIFS (ubi5:0): media format: w4/r0 (latest is w5/r0), UUID 84E3. /dev/ubi5_0 on /userdata type ubifs (rw,relatime,assert=read-only,ubi=5,vol=0) Starting network: [ 2.441037] rk_dvbm ffa70000.rkdvbm: probe start [ 2.441241] rk_dvbm ffa70000.rkdvbm: dvbm ctx d552a72b [ 2.441704] rk_dvbm ffa70000.rkdvbm: probe success [ 2.495691] rkcifhw ffa10000.rkcif: no iommu attached, using non-iommu buffes [ 2.495735] rkcifhw ffa10000.rkcif: No reserved memory region assign to CIF [ 2.497984] rkcif rkcif-mipi-lvds: rkcif driver version: v00.01.0a [ 2.498115] rkcif rkcif-mipi-lvds: attach to cif hw node [ 2.498130] rkcif rkcif-mipi-lvds: failed to getOK dphy hw node [ 2.498160] rkcif rkcif-mipi-lvds: rkcif wait line 0 [ 2.498176] : terminal subdev does not exist [ 2.498186] : terminal subdev does not exist [ 2.498195] : terminal subdev does Starting ntpd: not exist [ 2.498204] : terminal subdev does not exist [ 2.498215] : get_remote_sensor: video pad[0] is null [ 2.498225] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 2.498237] : get_remote_sensor: video pad[0] is null [ 2.498245] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 2.498255] : get_remote_sensor: video pad[0] is null [ 2.498262] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 2.498271] : get_remote_sensor: video pad[0] is null [ 2.498279] : rkcif_update_sensor_info: stream[0] get remote sensor_sd faile! [ 2.512294] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified [ 2.518070] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2! [ 2.518109] rockchip-mipi-csi2: Async registered subdev [ 2.518122] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds! [ 2.573387] rkisp_hw ffa00000.rkisp: is_thunderboot: 0 [ 2.573418] rkisp_hw ffa00000.rkisp: max input:0x0@0fps [ 2.573431] rkisp_hw ffa00000.rkisp: Missing rockchip,grf property [ 2.573667] rkisp_hw ffa00000.rkisp: get sram size:258048 [ 2.573685] rkisp_hw ffa00000.rkisp: no iommu attached, using non-iommu buffs [ 2.573695] rkisp_hw ffa00000.rkisp: No reserved memory region. default cma ! [ 2.575828] rkisp rkisp-vir0: rkisp driver version: v02.00.00 [ 2.578525] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was no! [ 2.612266] rockchip-csi2-dphy-hw ff3e8000.csi2-dphy-hw: csi2 dphy hw probe ! [ 2.637162] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully! [ 2.686934] sc4336 4-0030-1: driver version: 00.01.01 [ 2.687075] sc4336 4-0030-1: Failed to get reset-gpios [ 2.687136] sc4336 4-0030-1: could not get default pinstate [ 2.687147] sc4336 4-0030-1: could not get sleep pinstate [ 2.687174] sc4336 4-0030-1: supply avdd not found, using dummy regulator [ 2.688294] sc4336 4-0030-1: supply dovdd not found, using dummy regulator [ 2.688589] sc4336 4-0030-1: supply dvdd not found, using dummy regulator [ 2.703539] sc4336 4-0030-1: Unexpected sensor id(000000), ret(-5) [ 2.728583] sc3336 4-0030: driver version: 00.01.01 [ 2.728732] sc3336 4-0030: Failed to get reset-gpios [ 2.728825] sc3336 4-0030: could not get default pinstate [ 2.728847] sc3336 4-0030: could not get sleep pinstate [ 2.728972] sc3336 4-0030: supply avdd not found, using dummy regulator [ 2.730694] sc3336 4-0030: supply dovdd not found, using dummy regulator [ 2.731001] sc3336 4-0030: supply dvdd not found, using dummy regulator [ 2.745173] sc3336 4-0030: Unexpected sensor id(000000), ret(-5) [ 2.767700] sc530ai 4-0030-2: driver version: 00.01.01 [ 2.767787] sc530ai 4-0030-2: lane_num = 2 [ 2.767986] sc530ai 4-0030-2: Failed to get reset-gpios [ 2.768189] sc530ai 4-0030-2: could not get default pinstate [ 2.768209] sc530ai 4-0030-2: could not get sleep pinstate [ 2.768304] sc530ai 4-0030-2: supply avdd not found, using dummy regulator [ 2.769290] sc530ai 4-0030-2: supply dovdd not found, using dummy regulator [ 2.770488] sc530ai 4-0030-2: supply dvdd not found, using dummy regulator [ 2.776088] sc530ai 4-0030-2: Unexpected sensor id(000000), ret(-5) [ 2.778962] rkcif rkcif-mipi-lvds: clear unready subdev num: 3 [ 2.778997] rockchip-csi2-dphy0: No link between dphy and sensor [ 2.780538] rockchip-csi2-dphy0: No link between dphy and sensor [ 2.780619] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote ! [ 2.780638] rkcif-mipi-lvds: Async subdev notifier completed [ 2.780664] rockchip-csi2-dphy0: No link between dphy and sensor [ 2.780974] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote ! [ 2.780991] rkcif-mipi-lvds: There is not terminal subdev, not synchronized P [ 2.781024] rockchip-csi2-dphy0: No link between dphy and sensor [ 2.781048] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote ! [ 2.781055] rkcif-mipi-lvds: There is not terminal subdev, not synchronized P [ 2.781789] rkisp rkisp-vir0: clear unready subdev num: 1 [ 2.782475] rkisp-vir0: Async subdev notifier completed [ 2.826833] rga: rga2, irq = 35, match scheduler [ 2.827294] rga: rga2 hardware loaded successfully, hw_version:3.3.87975. [ 2.827318] rga: rga2 probe successfully [ 2.828750] rga_iommu: IOMMU binding successfully, default mapping core[0x4] [ 2.830946] rga: Module initialized. v1.2.23 [ 2.939128] mpp_vcodec: loading out-of-tree module taints kernel. [ 2.960544] mpp_vcodec: init new [ 2.960731] mpp_service mpp-srv: 3760314f author: Zhihua Wang 2023-01-12 [vcy [ 2.960748] mpp_service mpp-srv: probe start [ 2.963073] mpp_rkvenc_540c ffa50000.rkvenc: probing start [ 2.965160] mpp_rkvenc_540c ffa50000.rkvenc: probing finish [ 2.965661] mpp_vepu_pp ffa60000.rkvenc-pp: probe device [ 2.965794] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_a_pp is not found! [ 2.965807] vepu_pp_init:528: No aclk reset resource define OK [ 2.965819] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_h_pp is not found! [ 2.965828] vepu_pp_init:531: No hclk reset resource define [ 2.967978] mpp_vepu_pp ffa60000.rkvenc-pp: probing finish [ 2.968298] mpp_service mpp-srv: probe success [ 3.011043] RKNPU ff660000.npu: RKNPU: rknpu iommu device-tree entry not foue [ 3.013646] RKNPU ff660000.npu: RKNPU: Initialized RKNPU driver: v0.8.2 for 9 [ 3.013783] RKNPU ff660000.npu: dev_pm_opp_set_regulators: no regulator (rkn9 Starting sshd: rmmod: can't unload module 'sc530ai': No such file or directory [ 3.302084] rockit_load start / insmod_ko.sh: line 78: /oem/usr/ko/insmod_wifi.sh: not found ln: /usr/www/userdata: No such file or directory ln: /usr/www/usb0: No such file or directory ln: /usr/www/sdcard: No such file or directory md5sum: can't open '/tmp/rkipc-factory-config.ini': No such file or directory OK Starting telnetd: Error: not found rkipc.ini !!! /oem/usr/bin/RkLunch.sh: exit: line 110: Illegal number: -1 OK [ 3.322912] rockit_load end [ 3.619362] rk_gmac-dwmac ffa80000.ethernet eth0: PHY [stmmac-0:02] driver [) [ 3.620090] dwmac4: Master AXI performs any burst length [ 3.620134] rk_gmac-dwmac ffa80000.ethernet eth0: No Safety Features suppor/d [ 3.620154] rk_gmac-dwmac ffa80000.ethernet eth0: PTP not supported by HW [ 3.620495] rk_gmac- dwmDebug: configfs_ac ffa80000.ethernet eth0: configuring for phy/rmii link mode init udhcpc: started, v1.36.1 [ 3.954090] file system registered udhcpc: broadcasting discover mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functionsy [ 3.992730] using random self ethernet address [ 3.992773] using random host ethernet address mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functionsy [ 4.015607] Mass Storage Function, version: 2009/09/11 [ 4.015737] LUN: removable file: (no medium) [ 4.108248] read descriptors [ 4.108463] read strings [ 5.107771] usb0: HOST MAC 3a:69:03:70:4d:6d [ 5.107800] usb0: MAC 0a:e4:8f:13:0f:28 [ 5.226195] dwc3 ffb00000.usb: device reset [ 5.343848] dwc3 ffb00000.usb: device reset [ 5.467486] android_work: sent uevent USB_STATE=CONNECTED [ 5.473710] android_work: sent uevent USB_STATE=CONFIGURED [ 5.656830] rk_gmac-dwmac ffa80000.ethernet eth0: Link is Up - 100Mbps/Full x current_ip = 172.32.0.70 TARGET_IP = 172.32.0.93 luckfox : set usb0 ip 172.32.0.93 usb0 config success Starting SMB services: udhcpc: broadcasting discover udhcpc: broadcasting select for 192.168.40.202, server 192.168.40.1 udhcpc: lease of 192.168.40.202 obtained from 192.168.40.1, lease time 14400 deleting routers adding dns 172.16.5.2 OK Starting NMB services: OK rm: can't remove '/tmp/.pin_diagram.txt': No such file or directory /usr/bin/luckfox-config: line 46: warning: command substitution: ignored null bt Only Luckfox Pico Ultra /Luckfox Pico Ultra W support RGB Complete configuration loading Found ADC keys device: /dev/input/event0 /root/main.py and /root/boot.py not exist ,pass... OK hwclock: can't open '/dev/misc/rtc': No such file or directory RTC does not require time calibration Welcome to luckfox pico luckfox login: root Password: [root@luckfox root]# |
서비스는 ssh 외에는 도는게 없는 것 같다. 카메라 안달아서 그런가?
| [root@luckfox root]# df -h Filesystem Size Used Available Use% Mounted on ubi0:rootfs 67.1M 61.9M 5.2M 92% / devtmpfs 16.4M 0 16.4M 0% /dev tmpfs 16.5M 0 16.5M 0% /dev/shm tmpfs 16.5M 168.0K 16.4M 1% /tmp tmpfs 16.5M 524.0K 16.0M 3% /run /dev/ubi4_0 22.4M 17.1M 5.3M 76% /oem /dev/ubi5_0 4.5M 24.0K 4.5M 1% /userdata [root@luckfox root]# netstat -tnl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5555 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN netstat: /proc/net/tcp6: No such file or directory [root@luckfox root]# cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : Generic DT based system Revision : 0000 Serial : ca8ebbd389df2126 [root@luckfox root]# free -h total used free shared buff/cache available Mem: 33.1M 15.0M 3.1M 692.0K 15.0M 14.6M Swap: 0 0 0 |
+
요건
luckfox pico ultra의 카메라를 달고 켠 거. 로그인 자체를 못한다.
| DDR V1.10 ec2fae0c96 wesley.yao 22/11/15-10:58:09 S5P1 fc27 rgef0 rgef1 DDRConf1 DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Die BW=16 Size=64MB 528MHz DDR bin out U-Boot SPL board init U-Boot SPL 2017.09 (Jul 10 2024 - 15:27:08) unrecognized JEDEC id bytes: ff, ef, aa Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 2 spl: mmc init failed with error: -123 Trying to boot from MTD1 ENVF: Primary 0x00000000 - 0x00040000 ENVF: OK Trying fit image at 0x400 sector ## Verified-boot: 0 ## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(c2f767e435...) + sha256(0cd7e36c53...) + OK ## Checking fdt 0x0025bed0 ... sha256(51bba657c3...) + OK Total: 241.436 ms Jumping to U-Boot(0x00200000) U-Boot 2017.09 (Jul 10 2024 - 15:27:08 +0800) Model: Rockchip RV1106 EVB Board PreSerial: 2, raw, 0xff4c0000 DRAM: 64 MiB Sysmem: init Relocation Offset: 03d85000 Relocation fdt: 02dfacb0 - 02dfede0 CR: M/C/I Using default environment Bootdev(atags): mtd 1 ENVF: Primary 0x00000000 - 0x00040000 ENVF: OK PartType: ENV DM: v2 No misc partition boot mode: None FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK Model: Luckfox Pico Plus CLK: (uboot. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz aclk_peri_root 400000 KHz hclK_peri_root 200000 KHz pclk_peri_root 100000 KHz aclk_bus_root 300000 KHz pclk_top_root 100000 KHz pclk_pmu_root 100000 KHz hclk_pmu_root 200000 KHz Net: eth0: ethernet@ffa80000 Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image at 0x290da80 with size 0x002ec200 Fdt Ramdisk skip relocation No misc partition ## Loading kernel from FIT Image at 0290da80 ... Using 'conf' configuration ## Verified-boot: 0 Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x02916a80 Data Size: 3027200 Bytes = 2.9 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: sha256 Hash value: 66929aa0a4d3f91d2b47fa6dae6865e75d0a7a606cda288fb10179af657ecf17 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 0290da80 ... Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x0290e280 Data Size: 34771 Bytes = 34 KiB Architecture: ARM Load Address: 0x00c00000 Hash algo: sha256 Hash value: 3692950246bab0e95c7f3f38c32aeedfaf37f07237d386d6a68d993ddadc0dd1 Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x0290da80 to 0x00c00000 Booting using the fdt blob at 0x00c00000 Loading Kernel Image from 0x02916a80 to 0x00008000 ... OK kernel loaded at 0x00008000, end = 0x002eb100 Using Device Tree in place at 00c00000, end 00c0b7d2 Adding bank: 0x00000000 - 0x04000000 (size: 0x04000000) Total: 602.567 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.110 (hxj@luckfox-System-Product-Name) (arm-rockchip830-linux-uclibcgnueabihf-gcc (crosstool-N4 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Luckfox Pico Plus [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 24576 KiB at 0x02800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: user_debug=31 storagemedia=mtd androidboot.storagemedia=mtd androidboot.mode=normal rootwa) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache [ 0.000000] Memory: 33684K/65536K available (3784K kernel code, 319K rwdata, 1824K rodata, 200K init, 140K bss, 7276K reserv) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x1fb/0x360 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000019] Switching to timer-based delay loop, resolution 41ns [ 0.000413] Console: colour dummy device 80x30 [ 0.000457] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.000474] pid_max: default: 4096 minimum: 301 [ 0.000649] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000665] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001305] CPU: Testing write buffer coherency: ok [ 0.001831] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.002248] devtmpfs: initialized [ 0.009046] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.009234] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.009259] futex hash table entries: 16 (order: -5, 192 bytes, linear) [ 0.009350] pinctrl core: initialized pinctrl subsystem [ 0.010225] NET: Registered protocol family 16 [ 0.010658] DMA: failed to allocate 0 KiB pool for atomic coherent allocation [ 0.011449] thermal_sys: Registered thermal governor 'step_wise' [ 0.011459] thermal_sys: Registered thermal governor 'user_space' [ 0.011723] cpuidle: using governor menu [ 0.011759] Registered FIQ tty driver [ 0.024770] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000 [ 0.025544] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000 [ 0.026274] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000 [ 0.027015] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000 [ 0.027122] rockchip-pinctrl pinctrl: probed pinctrl [ 0.036479] fiq_debugger fiq_debugger.0: IRQ uart_irq not found [ 0.036505] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 0.036780] printk: console [ttyFIQ0] enabled [ 0.037022] Registered fiq debugger ttyFIQ0 [ 0.039066] SCSI subsystem initialized [ 0.039294] usbcore: registered new interface driver usbfs [ 0.039342] usbcore: registered new interface driver hub [ 0.039395] usbcore: registered new device driver usb [ 0.039645] mc: Linux media interface: v0.10 [ 0.039692] videodev: Linux video capture interface: v2.00 [ 0.040848] Advanced Linux Sound Architecture Driver Initialized. [ 0.041602] rockchip-cpuinfo cpuinfo: SoC : 11031000 [ 0.041629] rockchip-cpuinfo cpuinfo: Serial : 3c6d8f8ee95e4dd0 [ 0.041992] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: probe success! [ 0.042768] clocksource: Switchedgetall getall getall to clocksource arch_sys_counter [ 0.050292] NET: Registered protocol family 2 [ 0.050462] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.050948] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.051008] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051039] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051056] TCP: Hash tables configured (established 1024 bind 1024) [ 0.051177] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.0512295] RPC: Registered named UNIX socket transport module. [ 0.051913] RPC: Registered udp transport module. [ 0.051922] RPC: Registered tcp transport module. [ 0.051929] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.053163] Initialise system trusted keyrings [ 0.053399] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.057490] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.058309] NFS: Registering the id_resolver key type [ 0.058368] Key type id_resolver registered [ 0.058386] Key type id_legacy registered [ 0.058455] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.058940] Key type asymmetric registered [ 0.058971] Asymmetric key parser 'x509' registered [ 0.058994] io scheduler mq-deadline registered [ 0.059480] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found [ 0.064348] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.064378]ge tall dma-pl330 ff420000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.065260] rockchip-pvtm ff240000.pvtm: pvtm@0 probed [ 0.065476] rockchip-pvtm ff390000.pvtm: pvtm@0 probed [ 0.066081] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.071061] random: fast init done [ 0.071201] random: crng init done [ 0.082278] brd: module loaded [ 0.088954] loop: module loaded [ 0.091404] spi-nand spi2.0: Winbond SPI NAND was found. [ 0.091432] spi-nand spi2.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.092757] 7 cmdlinepart partitions found on MTD device spi-nand0 [ 0.092812] Creating 7 MTD partitions on "spi-nand0": [ 0.092861] 0x000000000000-0x000000040000 : "env" [ 0.094853] 0x000000040000-0x000000080000 : "idblock" [ 0.096922] 0x000000080000-0x000000100000 : "uboot" [ 0.098825] 0x000000100000-0x0Seeding 2048 bits and crediting 000Saving 2048 bits of creditable seed for next boot 00500000 : "boot" [ 0.100940] 0x000000500000-0x000002300000 : "oem" [ 0.103089] 0x000002300000-0x000002d00000 : "userdata" [ Starting syslogd: 0.105126] 0x000002d00000-0x000007d00000 : "rootfs" [ 0.108717] rk_gmac-dwmac ffa80000.ethernet: IRQ eth_OK lpi not found [ 0.108913] rk_gmac-dwc ffa80000.ethernet: PTP uses main clock [ 0.108970] rk_gmac-dwmac ffa80000.ethernet: no regulator found [ 0.108985] rk_gmac-dwmacStarting klogd: ffa80000.ethernet: clock input or output? (input). [ 0.108996] rk_gmac-dwmac fOK fa80000.ethernet: Can not read property: tx_delay. [ 0.109006] rk_gmac-dwmac ffa80000.ethernet: set tx_delay to 0xffffffff [ 0.109015] rk_gmac-dwmac ffa80000.ethgeretall net: Can not read property: rx_delay. [ 0.109024] rk_gmac-dwmac ffa80000.ethernet: set rx_delay to 0xffffffff [ 0.109100] rk_gmac-dwmac ffa80000.ethernet: intRunning sysctl: egrated PHY? (yes). [ 0.109115] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_rx [ 0.109126] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_tx [ 0.109158] rk_gmac-dwmac ffa80000.ethernet: cannot get clock clk_mac_speed [ 0.109169] rk_gmac-dwmac ffa80000.ethernet: clock input from PHY [ 0.109423] rk_gmac-dwmac ffa80000.ethernet: init for RMII [ 0.109680] rk_gmac-dwmac ffa80000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.109711] rk_gmac-dwmac ffa80000.ethernet: DWMAC4/5 [ 0.109728] rk_gmac-dwmac ffa80000.ethernet: DMA HW capability register supported [ 0.109739] rk_gmac-dwmac ffa80000.ethernet: RX Checksum Offload Engine supported [ 0.109748] rk_gmac-dwmac ffa80000.ethernet: TX Checksum insertion supported [ 0.109756] rk_gmac-dwmac ffa80000.ethernet: Wake-Up On Lan supported [ 0.109763]OK rk_gmac-dwmac ffa80000.ethernet: TSO supported [ 0.109772] rk_gmac-dwmac ffa80000.ethernet: Enable RX Mitigation via HPopulating /dev using udev: W Watchdog Timer [ 0.109781] rk_gmac-dwmac ffa80000.ethernet: TSO feature enabled [ 0.109793] rk_gmac-dwmac ffa80000.ethernet: Using 40 bits DMA width [ 0.117700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.118116] usbcore: registered new interface driver usb-storage [ 0.118345] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.118412] Mass Storage Function, version: 2009/09/11 [ 0.118453] LUN: removable file: (no medium) [ 0.118496] no file given fgeotall r LUN0 [ 0.118541] udc f have been registered at 0x30 [ 0.121102] i2c i2c-4: 2 i2c clients have been registered at 0x30 [ 0.122262] usbcore: registered new interface driver uvcvideo [ 0.122284] USB Video Class driver (1.1.1) [ 0.123616] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully! [ 0.125122] cpu cpu0: failed to register system monitor [ 0.125638] Synopsys Designware Multimedia Card Interface Driver [ 0.126679] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode. [ 0.126745] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller. [ 0.126763] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a [ 0.126813] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo [ 0.128037] dtbocfg: 0.1.0 [ 0.128118] dtbocfg: OK [ 0.130461] rv1106-acodec ff480000.acodec: current soc_id: rv1103 [ 0.130600] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_ms: 0 [ 0.132534] NET: Registered protocol family 17 [ 0.132661] Key type dns_resolver registered [ 0.133706] Loading compiled-in X.509 certificates [ 0.134427] [ 0.134464] ******************************************************************** [ 0.134476] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.134483] ** ** [ 0.134489] ** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL ** [ 0.134495] ** ** [ getall 0.134502] ** This means that this kernel is built to expose clk operations ** [ 0.134509] ** such as parent or rate setting, enabling, disabling, etc. ** [ 0.134514] ** to userspace, which may compromise security on your system. ** [ 0.134520] ** ** [ 0.134526] ** If you see this message and you are not debugging the ** [ 0.134532] ** kernel, report this immediately to your vendor! ** [ 0.134538] ** ** [ 0.134544] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.134551] ******************************************************************** [ 0.139780] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.155071] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 0.224530] ubi0: attaching mtd6 [ 0.410207] ubi0: scanning is finished [ 0.415351] ubi0: attached mtd6 (name "rootfs", size 80 MiB) [ 0.415379] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.415388] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.415397] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.415405] ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0 [ 0.415425] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 0.415437] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1782365620 [ 0.415447] ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 20 [ 0.416813] ALSA device lgeitall st: [ 0.416851] #0: rv-acodec [ 0.417522] ubi0: background thread "ubi_bgt0d" started, PID 54 [ 0.417794] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 0.436663] UBIFS (ubi0:0): recovery needed [ 0.461644] UBIFS (ubi0:0): recovery deferred [ 0.461791] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode [ 0.461823] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 0.461836] UBIFS (ubi0:0): FS size: 76820480 bytes (73 MiB, 605 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 0.461847] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 0.461859] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID C0F1C630-BECF-4CF7-89D7-42AD86B7C7A8, small LPT model [ 0.463259] VFS: Mounted root (ubifs filesystem) readonly on device 0:14. [ 0.464620] devtmpfs: mounted [ 0.464858] Freeing unused kernel memory: 200K [ 0.464870] Kernel memory protection not selected by kernel config. [ 0.464908] Run /sbin/init as init process [ 0.473762] process '/bin/busybox' started with executable stack [ 0.555827] UBIFS (ubi0:0): completing deferred recovery [ 0.596282] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 57 [ 0.600356] UBIFS (ubi0:0): deferred recovery completed [ 0.917202] udevd[87]: starting version 3.2.7 [ 0.935692] udevd[87]: specified group 'input' unknown [ 0.937498] udevd[87]: specified group 'kvm' unknown [ 0.964065] udevd[88]: starting eudev-3.2.7 getall [ 1.459063] udevd[97]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd0ro': No such file or directory [ 1.466668] udevd[98]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd1ro': No such file or directory [ 1.481389] udevd[99]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd2ro': No such file or directory [ 1.489896] udevd[100]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd3ro': No such file or directory [ 1.501307] udevd[101]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd4ro': No such file or directory [ 1.509915] udevd[102]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd5ro': No such file or directory [ 1.519815] udevd[103]: failed to execute '/lib/udev/mtd_probe' 'mtd_probe /dev/mtd6ro': No such file or directory getall getall done getall /etc/init.d/S20linkmount info: mount point path [IGNORE] not found, skip... ***********/dev/ubi4_0 not exist*********** ***********/dev/ubi4 not exist*********** [ 1.957887] ubi4: attaching mtd4 getall [ 2.028114] ubi4: scanning is finished [ 2.037090] ubi4: attached mtd4 (name "oem", size 30 MiB) [ 2.037121] ubi4: PEBUBI device numbe size: 1310r 4, total 240 LEBs (30474240 bytes, 29.1 MiB), available 0 LEBs (0 bytes), ) 72 bytes (128 KiB), LEB size: 126976 bytes [ 2.037132] ubi4: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.037142] ubi4: VID header offset: 2048 (aligntry to make volume: /dev/ubi4_0 ... ed 2048), data offset: 4096 [ 2.037151] ubi4: good PEBs: 240, bad PEBs: 0, corrupted PEBsubimkvol: error!: bad volume size: "0" : 0 [ 2.037160] ubi4: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.037171] ubi4: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1080680260 [ 2.037182] ubi4: available PEBs: 0, total reserved PEBs: 240, PEBs reserved for bad PEB handling: 20 [ 2.038728] ubi4: background thread "ubi_bgt4d" started, PID 124 [ 2.089279] UBIFS (ubi4:0): Mounting in unauthenticated mode [ 2.089965] UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 129 [ 2.109234] UBIFS (ubi4:0): recovery needed getall [ 2.170793] UBIFS (ubi4:0): recovery completed [ 2.171917] UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "oem" [ 2.171933] UBIFS (ubi4:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.1946] UBIFS (ubi4:0): FS size: 26157056 bytes (24 MiB, 206 LEBs), journal size 4190208 bytes (3 MiB, 33 LEBs) [ 2.171954] UBIFS (ubi4:0): reserved for root: 0 bytes (0 KiB) [ 2.171965] UBIFS (ubi4:0): media format: w4/r0 (latest is w5/r0), UUID 1631A162-8837-4D93-BCE4-F871D6865CB1, small LPT model ***********/dev/ubi5_0 not exist*********** ***********/dev/ubi5 not exist*********** [ 2.226923] ubi5: attaching mtd5 [ 2.250828] ubi5: scanning is finished [ 2.259430] ubi5: attached mtd5 (name "userdata", size 10 MiB) [ 2.2595UBI device number 5, total 80 LEB02] ubi5: Ps (10158080 bytes, 9.7 MiB), available 0 LEBs (0 bytes), LEB size 126976) EB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.259514] ubi5: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.25952ge2ta]ll ubi5: VItry to make volume: /dev/ubi5_0 ... D header offset: 2048 (aligned 2048), datubimkvol: error!: bad volume size: "0" a offset: 4096 [ 2.259532] ubi5: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 2.259541] ubi5: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.259552] ubi5: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1196530650 [ 2.259563] ubi5: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 20 [ 2.262144] ubi5: background thread "ubi_bgt5d" started, PID 138 [ 2.305713] UBIFS (ubi5:0): Mounting in unauthenticated mode [ 2.306000] UBIFS (ubi5:0): background thread "ubifs_bgt5_0" started, PID 143 [ 2.325440] UBIFS (ubi5:0): recovery needed [ 2.383117] UBIFS (ubi5:0): recovery completed [ 2.384251] UBIFS (ubi5:0): UBIFS: mounted UBI device 5, volume 0, name "userdata" [ 2.384268] UBIFS (ubi5:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.384280] UBIFS (ubi5Initializing random number generator... :0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 16) [ 2.384290] UBIFS (ubi5:0): reserved for root: 0 bytes (0 KiB) [ 2.384304] UBIFS (ubi5:0): media format: w4/r0 (latest is w5/r0), UUID 84E36239-DB7A-4done. A82-8602-F4CC6E064CA7, small LPT model getall /dev/ubi5_0 on /userdata type ubifs (rw,relatime,assert=read-only,ubi=5,vol=0) Starting network: [ 2.552909] rk_dvbm ffa70000.rkdvbm: probe start [ 2.553012] rk_dvbm ffa70000.rkdvbm: dvbm ctx 0d587ef5 [ 2.553434] rk_dvbm ffa70000.rkdvbm: probe success getall [ 2.608538] rkcifhw ffa10000.rkcif: no iommu attached, using non-iommu buffers [ 2.608580] rkcifhw ffa10000.rkcif: No reserved memory region assign to CIF [ 2.612551] rkcif rkcif-mipi-lvds: rkcif driver version: v00.01.0a [ 2.612683] rkcOK if rkcif-mipi-lvds: attach to cif hw node [ 2.612698] rkcif rkcif-mipi-lvds: failed to get dphy hw node [ 2.612728] rkcif rkcif-mipi-lvds: rkcif wait line 0 [ 2.612745] : terminal subdev does not exist [ 2.612802] : terminal subdev does not exist [ 2.612813] : terminaStarting ntpd: l subdev does not exist [ 2.612822] : terminal subdev does not exist [ 2.612833] : get_remote_sensor: video pad[0] is null [ 2.612843] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.612854] : get_remote_sensor: video pad[0] is null [ 2.612861] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.612871] : get_remote_sensor: video pad[0] is null [ 2.612879] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.612887] : get_remote_sensor: video pad[0] is null [ 2.612895] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 2.628877] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified [ 2.634612] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized! [ 2.634648] rockchip-mipi-csi2: Async registered subdev [ 2.634660] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds! [ 2.692496get] allrkisp _hw ffa00000.rkisp: is_thunderboot: 0 [ 2.692541] rkisp_hw ffa00000.rkisp: max input:0x0@0fps [ 2.692555] rkisp_hw ffa00000.rkisp: Missing rockchip,grf property [ 2.693952] rkisp_hw ffa00000.rkisp: get sram size:258048 [ 2.693975] rkisp_hw ffa00000.rkisp: no iommu attached, using non-iommu buffers [ 2.693988] rkisp_hw ffa00000.rkisp: No reserved memory region. default cma area! [ 2.696941] rkisp rkisp-vir0: rkisp driver version: v02.00.00 [ 2.698631] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized! [ 2.733626] rockchip-csi2-dphy-hw ff3e8000.csi2-dphy-hw: csi2 dphy hw probe successfully! [ 2.758970] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully! [ 2.807430] sc4336 4-0030-1: driver version: 00.01.01 [ 2.807782] sc4336 4-0030-1: Failed to get reset-gpios [ 2.808139] sc4336 4-0030-1: could not get default pinstate [ 2.808167] sc4336 4-0030-1: could not get sleep pinstate [ 2.808313] sc4336 4-0030-1: supply avdd not found, using dummy regulator [ 2.811937] sc4336 4-0030-1: supply dovdd not found, using dummy regulator [ 2.812064] sc4336 4-0030-1: supply dvdd not found, using dummy regulator [ 2.827234] sc4336 4-0030-1: Unexpected sensor id(00cc41), ret(0) [ 2.850500] sc3336 4-0030: driver version: 00.01.01 [ 2.850696] sc3336 4-0030: Failed to get reset-gpios [ 2.850897] sc3336 4-0030: could not get default pinstate [ 2.850917] sc3336 4-0030: could not get sleep pinstate [ 2.851026] sc3336 4-0030: supply avdd not found, using dummy regulator [ 2.852039] sc3336 4-0030: supply dovdd not found, using dummy regulator [ 2.852285] sc3336 g4etall -0030: supply dvdd not found, using dummy regulator [ 2.866382] sc3336 4-0030: Detected OV00cc41 sensor [ 2.866456] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_sc3336 4-0030:bus type 5 [ 2.888893] rockchip-pinctrl pinctrl: pin gpio3-20 already requested by 4-0030; cannot claim for 4-0030-2 [ 2.888930] rockchip-pinctrl pinctrl: pin-116 (4-0030-2) status -22 [ 2.888944] rockchip-pinctrl pinctrl: could not request pin 116 (gpio3-20) from group mipi-refclk-out0 on device rockchip-pl [ 2.888956] sc530ai 4-0030-2: Error applying setting, reverse things back [ 2.888985] sc530ai: probe of 4-0030-2 failed with error -22 [ 2.892256] rkcif rkcif-mipi-lvds: clear unready subdev num: 2 [ 2.894589] rkcif-mipi-lvds: Async subdev notifier completed [ 2.896606] rkisp-vir0: Async subdev notifier completed [ 2.898080] rkisp rkisp-vir0: clear unready subdev num: 0 [ 2.943450] rga: rga2, irq = 35, match scheduler [ 2.943953] rga: rga2 hardware loaded successfully, hw_version:3.3.87975. [ 2.943978] rga: rga2 probe successfully [ 2.945238] rga_iommu: IOMMU binding successfully, default mapping core[0x4] [ 2.947583] rga: Module initialized. v1.2.23 getall [ 3.058852] mpp_vcodec: loading out-of-tree module taints kernel. [ 3.078525] mpp_vcodec: init new [ 3.078749] mpp_service mpp-srv: 3760314f author: Zhihua Wang 2023-01-12 [vcodec]: check chan create when destroy [ 3.078765] mpp_service mpp-srv: probe start [ 3.083363] mpp_rkvenc_540c ffa50000.rkvenc: probing start [ 3.085471] mpp_rkvenc_540c ffa50000.rkvenc: probing finish [ 3.085996] mpp_vepu_pp ffa60000.rkvenc-pp: probe device [ 3OK .087597] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_a_pp is not found! [ 3.087624] vepu_pp_init:528: No aclk reset resource define [ 3.087637] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_h_pp is not found! [ 3.087646] vepu_pp_init:531: No hclk reset resource define [ 3.089028] mpp_vepu_pp ffa60000.rkvenc-pp: probing finish [ 3.089353] mpp_service mpp-srv: probe success [ 3.142027] RKNPU ff660000.npu: RKNPU: rknpu iommu device-tree entry not found!, using non-iommu mode [ 3.144419] RKNPU ff660000.npu: RKNPU: Initialized RKNPU driver: v0.8.2 for 20220829 [ 3.144556] RKNPU ff660000.npu: dev_pm_opp_set_regulators: no regulator (rknpu) found: -19 getall Starting sshd: rmmod: can't unload module 'sc530ai': No such file or directory getall sc3336 9940 1 [ 3.391964] rockit_load start / insmod_ko.sh: line 78: /oem/usr/ko/insmod_wifi.sh: not found ln: /usr/www/userdata: No such file or directory ln: /usr/www/usb0: No such file or directory getall ln: /usr/www/sdcard: No such file or directory sc3336 9940 1 getall OK Starting telnetd: deac78ead81e5b4c211d690607e01c39 OK [ 3.408321] rockit_load end [ 3.723649] rk_gmac-dwmac ffa80000.ethernet eth0: PHY [stmmac-0:02] driver [RK630 PHY] (irq=POLL) [ 3.724127] dwmac4: Master AXI performs any burst length [ 3.724163] rk_gmac-dwmac ffa80000.ethernet eth0: No Safety Features support found [ 3.724185] rk_gmac-dwmac ffa80000.ethernet eth0: PTP not supported by HW [ 3.724527] rk_gmac-dwmac ffa80000.ethernet eth0: configuring for phy/rmii link mode getall udhcpc: started, v1.36.1 /etc/init.d/S50usbdevice: line 144: can't open : no such file Debug: configfs_init getall getall udhcpc: broadcasting discover [ 4.174808] file system registered mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory [ 4.224769] using random self ethernet address [ 4.224812] using random host ethernet address getall mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/acm.gs6': No such file or directory [ 4.265288] Mass Storage Function, version: 2009/09/11 [ 4.265517] LUN: removable file: (no medium) getall [ 4.454614] read descriptors [rkipc.c][main]:rkipc_ini_path_ is (null), rkipc_iq_file_path_ is /oem/usr/share/iqfiles, rkipc_log_level is 2 [param.c][rk_param_init]:g_ini_path_ is /userdata/rkipc.ini [ 4.454841] read strings [rockiva.c][rkipc_rockiva_init]:begin [network.c][rk_net_proc]:Creat rk_net_proc thread! [network.c][ntp_client_thread]:refresh_time_s is 60, ntp_server is 119.28.183.184 getall [rockiva.c][rkipc_rockiva_init]:ROCKIVA_BA_Init success create rknn_list success [rockiva.c][rkipc_rockiva_init]:end [isp.c][rk_isp_init]:g_iq_file_dir_ is /oem/usr/share/iqfiles [isp.c][rk_isp_init]:cam_id is 0, hdr_mode is close, scenario is normal rkaiq log level ff0 getall [ 4.700151] stream_cif_mipi_id0: s_power 1, entity use_count 1 [isp.c][sample_common_isp_init]:ID: 0, sensor_name is m00_b_sc3336 4-0030, iqfiles is /oem/usr/share/iqfiles [isp.c][sample_common_isp_init]:main_scene is normal, sub_scene is day [isp.c][sample_common_isp_init]:00:00:04.713425: rk_aiq_uapi2_sysctl_preInit_scene begin [isp.c][sample_common_isp_init]:00:00:04.721228: rk_aiq_uapi2_sysctl_preInit_scene over [ 4.700964] stream_cif_mipi_id0: s_power 0, entity use_count 0 getall [ 4.972363] stream_cif_mipi_id0: s_power 1, entity use_count 1 [ 4.974992] stream_cif_mipi_id0: open video, entity use_countt 2 [ 4.975313] stream[_cisp.c][sample_common_isp_init]:00:00:04.977843: rk_aiq_uapi2_sgetall ifysctl_init over _mipi_id1: open video, entity use_countt 1 [isp.c][sample_common_isp_run]:00:00:05.015251: rk_aiq_uapi2_sysctl_prepare succeed [ 5.025670] rkisp rkisp-vir0: first params buf queue [isp.c][sample_common_isp_run]:00:00:05.025669: rk_aiq_uapi2_sysctl_start succeed getall failed to open /sys/class/pwm/pwmchip3/export [isp.c][rk_isp_set_light_strength]:pwm3 init failed -2 [isp.c][rk_isp_set_blc_ste blance is auto, not support set gain [isp.c][rk_isp_set_white_blance_green]:white blance is auto, not support set gain [isp.c][rk_isp_set_white_blance_blue]:white blance is auto, not support set gain rockit log path (null), log_size = 0, can use export rt_log_path=, export rt_log_size= change log_file = (nil) RTVersion 00:00:05-188 {dump :064} --------------------------------------------------------- RTVersion 00:00:05-205 {dump :065} rockit version: git-8cb4d25b8 Tue Feb 28 11:12:39 2023 +0800 RTVersion 00:00:05-216 {dump :066} rockit building: built- 2023-02-28 15:23:19 RTVersion 00:00:05-224 {dump :067} --------------------------------------------------------- rockit default level 4, can use export rt_log_level=x, x=0,1,2,3,4,5,6 change (null) 00:00:05-243 {read_log_level :093} text is all=4 (null) 00:00:05-249 {read_log_level :095} module is all, log_level is 4 (null) 00:00:05-259 {monitor_log_level :144} #Start monitor_log_level thread, arg:(nil) RTIsp3x 00:00:05-278 {ispInitDevice :208} sensor name = m00_b_sc3336 4-0030 RTIsp3x getall 00:00:05-281 {ispInitDevice :211} sensor_index = 0 RTIsp3x 00:00:05-294 {ispInitDevice :208} sensor name = m00_b_sc3336 4-0030 RTIsp3x 00:00:05-298 {ispInitDevice :211} sensor_index = 0 [video.c][rk_video_init]:enable_jpeg is 1, enable_venc_0 is 1, enable_venc_1 is 1, enable_rtsp is 1, enable_rtmp is 0 RKViDev 00:00:05-321 {vi_set_dev_attr :440} VI_DEV_ATTR_S all parameter reserved [INFO rtsp_demo.c:280:rtsp_new_demo] rtsp server demo starting on port 554 [DEBUG rtsp_demo.c:480:rtsp_new_session] add session path: /live/0 [DEBUG rtsp_demo.c:480:rtsp_new_session] add session path: /live/1 rtsp streamq_alloc size is 1753484 rtsp streamq_alloc size is 1753484 === VI ATTRS INFO: === devId : 0 chnId : 0 buffcnt: 0 buffSize: 0 width: 0 height: 0 Maxwidth: 0 Maxwidth: 0 streaming: 0 RKViChn 00:00:05-371 {prepareRuntime :334} --------------------------------------------------------- RKViChn 00:00:05-380 {prepareRuntime :336} vi version: 1.86, name:vvi RKViChn 00:00:05-388 {prepareRuntime :337} rockit-ko version: vmpi:fb2eed2be49e RKViChn 00:00:05-396 {prepareRuntime :338} rockit-ko building: -2023-02-09-11:04:49 RKViChn 00:00:05-404 {prepareRuntime :339} --------------------------------------------------------- RKViChn 00:00:05-427 {prepareRuntime :358} mb pool create success, MBCnt= 2 [video.cgetall ][rkipc_pipe_0_init]:set vi channel wrap line: 324, wrapBuffSize = 1119744 [ 5.273923] vsys dev o[network.c][rk_network_get_cable_state]:read Cable stapen 26 [ 5.442419] usb0: HOST MAC 7a:5d:02:a4:te 72:ab [ 5.442450] usb0: MAC d2:a8:17:cf:2b:0f cmpi 00:00:05-454 {updateWrapLine :1643} tmp wrap_line: 324, cur wrap_line: 324, cur_w: 2304, cur_h: 1296, max_r4 etwork.c][rk_network_get_cable_state]: [usb0cmpi 00:00:05-470 {createRuntime :542} [WRAP MODE]:set wrap buffer cnt = 2, wrap buff size = 1119744 ] link down RTIsp3x 00:00:05-492 {ispInitDevice :208} sensor name = m00_b_sc3336 4-0030 RTIsp3x 00:00:05-496 {ispInitDevice :211} sensor_index = 0 RTDeviceV4L2 00:00:05-506 {open :138} open video name(/dev/video11) [network.c][rk_network_get_cable_state]:read Cable state RKViChn 00:00:05-517 {setFrameRate :1153} [vi] dev(0) ch(0) illegal param s32SrcFrameRate(0) s32DstFrameRate(0) [network.c][rk_network_get_cable_state]: [usb0] link down RTDeviceV4L2 00:00:05-536 {ispCameraInfo :549} current device:/dev/video11 isn't compatible(cap:0x84201000) device,memo0 RTDeviceV4L2 00:00:05-554 {ispInitFormat :726} ioctl VIDIOC_S_FMT OK RKViChn 00:00:05-556 {start :[ 5.559565] rkisp queue buf done [ 813} =========== vi Start startRuntime =========== RTDeviceV4L2 00:00:05-570 {ispStreamOn :440} do ispStreamOn start 5.565642] dwc3 ffb00000.usb: device reset [ 5.g58etall 0929] rkisp-vir0: wrap_line mode can not set the mirror [ 5.581368] rkisp_hw ffa00000.rkisp: set isp clk = 198000000Hz [ 5.581455] rkcif-mipi-lvds: sditf_reinit_modRTDeviceV4L2 00:00:05-598 {ispStreamOn :493} do ie, modspStreamOn donm ode->name rkisp-vir0, link_mode 1 [ 5.581487]RKVencChannel 00:00:05-612 {VencInvoke :139} venc get_rc_param invoke error: ctx->hw 0x234de0, ctx->hw_! rkincChannel 00:00:05-624 {getRcParam :2350} return the user setting value on failure to get rc param from mpp fail. sp-vir0: flip not support width wrap function [ 5.583526] rkcif-mipi-lvds: stream[0] start streaming 6fd142d9, sd_name:rockchip-csi2-dphy00000.mipi-csi2: stMpiAdapterEncode 00:00:05-650 {ma_encode_create :1ream on, src_sd:653}0 [ 5.583743] rockchip-mipi-csi2 ffa20000.mipi-c si2: stream ON [ 5.583799] rockchip-csi2-d45] rockchip-csi2-dphy csi2-dphy0: csi2_dphy_s_stream stream on:1, dphy0 [ 5.677922] mpp_vcodec: 44: num_chan = 0 [ 5.678761] mpp_vcodec: 368: attr->max_width = 2304, attr->max_height = 1296 [ 5.682879] dwc3 ffb00000.usb: device rese === VI ATTRS INFO: === devId : 0 chnId : 0 buffcnt: 0 buffSize: 0t [ 5.694575] mpp_vc width: 0 height: 0 Maxwidth: 0 Maxwidth: 0odec: 103: chan_entry->handle d1c55faf, enc d1 streaming: 0getall c55faf [ 5.703727] 755: MPP _RKViChn 00:00:05-734 {prepareRuntime :334} --------------------------------------------------------- RKViChn 00:00:05-744 {prepareRuntime :336} vi version: 1.86, name:vvi RKViChn 00:00:05-751 {prepareRuntime :337} rockit-ko veENC_SET_CFG in rsion: vmpi:fb2eed2be49e RKViChn 00:00:05-761 {pr[ 5.703781] 524: MPP_ENC_SET_RC_CFG bps 11197440 [104epareRuntime :338} rockit-ko buildi9 [network.c][rk_network_get_cable_state]:read Cable state [30:3ViChn 00:00:05-780 {prepareRuntime :0 : 118972339} -------------80] f---------------------------------ps------ 0] gop 60 [ 5.703800RKViChn ] h2 00:00:05-793 {pr65e_proc_prep_cfg:414: MPP_ENC_SET_PREP_CFG w:h [2304:12epareRuntime :96] ] [ 5.703831] 271: send header358} mb pool crea fte success, MBCntor set cfg change input/fo= 4 MpiAdapterEncode 00:00:05-814 {ma_encode_get_pack:rma1978} mat [ 5.705123]p ptr: 0xa3d74000 [network.c][rk_network_get_cable_statecmpi 00:00:05-818 {createRuntime : 75546} [non-WRAP MO5: MPP_EDE]: buff s6 ]: [NC_SET_CFG in [ 5.705156] 5eth0] link up 24: MPP_ENC_SET_RC_CFG bps 2048[DEBUG utils.c:1000 [1986:rtsp_codec_dat20000 : 2176000] fps [30:30] gop 50 [ 5.705169] 271: send header fora_parse_from_user set c_h265] vps 23fg change rc_mode/fps/gop [ 5.706 068] [DEBUG utils.c:194:rtsp_codec_data_parse_from_user_h265] sps 43 [DEBUG utils.c:2755: MPP_ENC_SET_CFG in [ 5.706152] 524: M02:rtsp_codec_datPPa_parse_from_user_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 5_h2659 RTIsp3x getall 00:00:05-858 {is0 pInitDevice :208} sensor name = m00_b_sc3336 4-0030[ 5.706174] 271: send header for set cfg change rc_mode/fps/gop [ 5.707632] 755: MPP_ENC_SET_CFG i n [ RTIsp3x 5.707 00:00:05-901 {is685] 524: MPP_ENC_SET_RC_CpInitDevice :211} sensor_index = 0FG bps 2048000 [19200 00] fps [25:25] gop 50 [ 5.707709] 271: send header for set cfg change rc_mode/fps/gop [ 5.707853] 755: MPP_ENC_SET_CFG in [ 5.707882] 524: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 [ 5.707899] 271: send header for set cfg change rc_mode/fps/gop G in 5.709496] 755: MPP_ERTDeviceV4L2 NC 00:00:05-941 {op_Sen :ET_CF138} open video name(/dev/video12) [ 5.709520] 524: MPP_ENC_SET_RC_CFG bps 2048000 [1920000 : 2176000] fps [25:25] gop 50 [ 5.709535] 271: send header for set c fg chaRKViChn nge rc_mode/fps/gop [ 5.728202] 1062: mode cbr bps [1 00:00:05-963 {se920000tFrameRate ::2048000:2176000] fps fix [25/1] 1153} [v-> fix [25] s/Full 767480] lrk_gmaclegal param s32S-dwmarcFrameRate(0) s3c ffa80000.ethernet2DstFrameRate(0)eth0: Link is Up - 100Mbp[0m - flow control rxRTDeviceV4L2 /tx 00:00:05-994 {isc3 ffb00000.usb: device reset [ 5.8pCameraInfo :62988] dwc3 ffb00000.usb: device reset 549} current device:/dev/video12 isn't compatible(cap:0x84201000) device,memoryType:4, retry:0 RTDeviceV4L2 00:00:06-030 {ispInitFormat :726} ioctl VIDIOC_S_FMT Ogetall K RKViChn 00:00:06-034 {start :813} =========== vi Start startRuntime =========== RTDeviceV4L2 00:00:06-053 {ispStreamOn :[ 6.037196] rkisp queue buf done [ 6.065588] dwc3 ffb00000.usb: device reset 440} do ispStreamOn start RTDeviceV4L2 00:00:06-070 {ispStreamOn :493} do ispStreamOn done Killed RKVencChannel 00:00:06-100 {VencInvoke :139} venc get_rc_param invoke error: ctx->hw 0x23e1c8, ctx->hw_create 0! RKVencChannel 00:00:06-106 {getRcParam :2350} return the user setting value on failure to get rc param from mpp fail. MpiAdapterEncode 00:00:06-132 {ma_encode_create :1653} ringbuf buf_size 204800 [ 6.072384] rkisp-vir0: wrap_line mode can not set the mirror [ 6.139683] mpp_vcodec: 44: num_chan = 1 [ 6.140014] mpp_vcodec: 368: attr->max_width = 704, attr->max_height = 576 [ 6.142229] mpp_vcodec: 103: chan_entry->handle f9440017, enc f9440017 [ 6.146615] 755: MPP_ENC_SET_CFG in [ 6.146747] 524: MPP_ENC_SET_RC_CFG bps 1520640 [1425600 : 1615680] fps [30:30] gop 60 [ 6.146782] h265e_proc_prep_MpiAdapterEncodecfg:414: MPP_ENC_SET_PREP_CFG w:h [704:576] s 00:00:06-172 {matride_encode_creatl :576] put/format 96] 271: send header for set cfngbuf buf_size 10g change in48576 [ 6.151358] 755: MPP_ENC_SET_CFG in [ 6.151486] 524: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps MpiAdapterEncode 00:00:06-204 {ma[30:30] gop 50 [ 6.151508] 271: send header for set cfg change rc_mo_encode_get_pack:1978} made/fps/gop [ 6.152490] 755: MPP_ENC_SET_CFG in [ 6.152529] 524: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 s/gop6.152547] 271: send header for set cfg change rc_mop ptr: 0xa3b10000de/fp [ 6.155256] 755: MPP_ENC_SET_CFG in [ 6.155295] 524: MPP_ENC_SET_RC_CFG bps 512000 route: SIOCDELRT: No such process [480000 : 544000] fps [30:30] gop 50 [ [DEBUG utils.c:186:rtsp_codec_dat6.155317] 271: send header for set cfg change rc_mode/fps/gop [ 6.158044] 755: MPP_ENC_SET_CFG in [ 6.158093] 524: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 [ 6.158118] 271: send header for set cfg change rca_parse_from_user_mode/fps/gop [ 6.164733] 755: MPP_ENC_SET_CFG in [ 6.164766] 524: MPP_ENC_SET_RC_CFG bps 512000 [480000 : 544000] fps [30:30] gop 50 [ 6.164783] 271: send_h265] vps 23 header for set c fg change rc[DEBUG utils.c:1_mode/fps/gop [ 6.199951] 1062: mode cbr bps [480000:512000:544000] fps fix [94:rtsp_codec_dat30/1] -> fix [30/1] gop i [50] v [0] [ 6.210409] mpp_vcodec: 44: num_chan = 2 [ 6.2200a_parse_from_user_h265] sps 43 === VI ATTRS INFO: === entry->handle ec 00:00:06-319 {ma_encode_get_pack:1978} ma49] mpp_pvcodec ptr: 0xa3710000: 103: chan_ devId : 0 chnId : 0getall 32de74, enc ec3buffcnt: 02de74 [ 6.230291] 755: MPP_ENC_SET_CFG in current_ip = 172.32.0.70 TARGET_IP = 172.32.0.93 [ buffSize: 06.230347] 524: MP [DEBUG utils.c:202:rtsp_codec_data_parse_from_userP_ENC_SET_RC_CFG bps 111974_h265] pps 940 [10497600 : 11897280] fps [30:30] g0 [ 6 width: 0.230982] height: 0755: Maxwidth: 0MPP_ENC_SET_CFG in [ 6.231017] 524: MPP_ENC_SET_R C_CFG bps 1119744 Maxwidth: 00 [10497 600 : 118 streaming: 097280] fps [30:30] gop 0 [ RKViChn 6.231206 00:00:06-378 {prepareRuntime :334} ------------] 755: MPP_ENC_SET_CFG in [ 6.231225] 524: MPP_ENC_SET_RC_CFG bps 11197440 [10497600 : 11897280] fps [30:30] gop 0 [ 6.252410] 755: MPP_ENC_SET_CFG in [ 6.252539] 524: MPP_ENC_SET_RC_CFG----------------- bps -----------------11197440 [10497600 : 11897280]----------- RKViChn 00:00:06-411 {pr fps [30:30] gop 0 [ 6.273443] dwc3 ffb00000.epareRuntime :usb: device reset 336} vi version: 1.86, name:vvi RKViChn 00:00:06-428 {prepareRuntime :337} rockit-ko version: vmpi:fb2eed2be49e RKViChn 00:00:06-433 {prepareRuntime :338} rockit-ko building: -2023-02-09-11:04:49 RKViChn 00:00:06-450 {prepareRuntime :339} --------------------------------------------------------- RKViChn 00:00:06-460 {prepareRuntime :358} mb pool create success, MBCnt= 3 cmpi 00:00:06-468 {cr[ 6.481790] dwc3 ffb00000.usb: device reset getall eateRuntime :546} [non-WRAP MODE]: buff size = 290304 RTIsp3x 00:00:06-491 {ispInitDevice :208} sensor name = m00_b_sc3336 4-0030 RTIsp3x 00:00:06-496 {ispInitDevice :211} sensor_index = 0 udhcpc: started, v1.36.1 RTDeviceV4L2 00:00:06-509 {open :138} open video name(/dev/video13) RKViChn 00:00:06-521 {setFrameRate :1153} [vi] dev(0) ch(2) illegal param s32SrcFrameRate(0) s32DstFrameRate(0) RTDeviceV4L2 00:00:06-533 {ispCameraInfo :549} current device:/dev/video13 isn't compatible(cap:0x84201000) device,memo0 RTDeviceV4L2 00:00:06-544 {ispInitFormat :726} ioctl VIDIOC_S_FMT OK RKViChn 00:00:06-552 {start :813} =========== vi Start startRuntime =========== RTDeviceV4L2 00:00:06-567 {ispStreamOn :440} do ispStreamOn start [ 6.555483] rkisp queue buf done RTDeviceV4L2 00:00:06-577 {ispStreamOn :493} do ispStreamOn done [ 6.575129] rkisp-vir0: wrap_line mode can not set the mirror [ 6.597396] vepu_pp_create_chn 0 cmpi 00:00:06-608 {mb_create_pool :222} allocated buffer(this=0x254738, data=0xa3259000, size=746496, id=188) cmpi 00:00:06-620 {attachToChn :480} The channel attr attach mapid: 0x0. getall cmpi 00:00:06-677 {mb_get_buffer_by_i:422} allocated buffer(this=0x26d590, data=(nil), size=0, id=-1) RKViChn 00:00:06-689 {getFrameRuntime :1031} -------------------------------vviBuf->buf_size: 290816 [video.c][rkipc_ivs_get_results]:OD flag:1 [audio.c][rkipc_ai_init]:aiAttr.u8CardName is #Starosd_time_server thread, arg:(nil) hw:0,0udhcpc: broadcasting discover [audio.c][rkipc_audio_vqe_init]:stAiVqeConfig.aCfgFile = udhcpc: broadcasting select for 192.168.40.202, server 192.168.40.1 /oem/usr/share/vqefiles/config_aivqe.jsonudhcpc: lease of 192.168.40.202 obtained from 192.168.40.1, lease time 14400 [osd.c][osd_time_server]:osd_time_id is [ 6.71 45179] dwc3 f[fb000osd.c00.usb: ][osd_time_serverdevice reset ]:osd_data.text.font_color is fff799 RKAiChn 00:00:06-752 {setAedAttr :789} pstAedConfig = cmpi 00:00:06-759 {mb_get_buffer_by_i:422} al) (nil), set mAedEnable = false geta[osd.c][osd_time_server]:osd_data.text.format is ll 24hour CHR-YYYY-MM-DD RKAiChn 00:00:06-787 {setBcdAttr :852} pstBcdConfig = rga_api version 1.7.3_[6] (nil), set mBcdEnable = false RKViChn 00:00:06-811 {getFrameRuntime :1031} -------------------------------vviBuf->buf_size: 290816 RKAiChn 00:00:06-824 {setBuzAttr :915} pstBuzConfig = (nil), set mBuzEnable = false luckfox : set usb0 ip RKAiChn 00:00:06-835 {setGbsAttr :979} pstGbsConfig = (nil), set mGbsEnable = false [ 6.865501] dwc3 ffb00000.usb: device reset RKAiChn 00:00:06-866 {prepareGraph :221} check enabled - vqe:1 aed:0 bcd:0 buz:0 gbs:0 cmpi 00:00:06-892 {mb_create_pool :222} allocated buffer(this=0x273650, data=0xa2db4000, size=65536, id=190) cmpi 00:00:06-909 {mb_create_pool :222} allocated buffer(this=0x2705f8, data=0xa2da400getall 0, size=65536, id=191) deleting routers cmpi 00:00:06-940 {attachToChn :480} The channel attr attach mapid: 0x0. cmpi 00:00:07-003 {attachToChn :480} The channel attr attach mapid: 0x0. cmpi 00:00:07-011 {attachToChn :480} The channel attr attach mapid: 0x0. [ 7.073530] dwc3 ffb00000.usb: device reset 172.32.0.93 usb0 config success getall cmpi 00:00:07-157 {mb_get_buffer_by_i:422} allocated buffer(this=0x26cc88, data=(nil), size=0, id=-1) RKViChn 00:00:07-171 {getFrameRuntime :1031} -------------------------------vviBuf->buf_size: 290816 RTFlowGraph 00:00:07-187 {setMaxInputStreamQ:287} ai: Illegal operation, no input port exists. getall Starting SMB services: [ 7.282026] dwc3 ffb00000.usb: device reset adding dns 172.16.5.2 getall [ 7.489576] dwc3 ffb00000.usb: device reset getall (null) 00:00:07-587 {dlsymSkv :103} load skv dynamic symbols: 0x253da8 RTNodeAFilterSkv 00:00:07-591 {open :157} current skv config is: 1 LOG (rkaudio_preprocess_init(): ,107), out_size is 256 LOG (skv_aec_state_init(): ,254), AEC-RELEASE-VERSION 2.1,RELEASE DATE 2022-12-09 LOG (skv_aec_state_init(): ,259), This AEC version is used for no more than 2 microphones! getall LOG (skv_preprocess_state_init(): ,614), BEAMFORM-RELEASE-VERSION 2.1,RELEASE DATE 2022-12-19 LOG (skv_preprocess_state_init(): ,623), This Beamform version is only used for 2 microphones! rtsp streamq_alloc size is 59884 rtsp streamq_alloc size is 59884 [[ 7.761599] dwc3 ffb00000.usb: device reset server.c][rkipc_server_thread]:#Start rkipc_server_thread thread, arg:(nil) [storage.c][rkipc_storage_set_dev_attr]:mount path is /userdata, dev_path is /dev/ubi5_0 [storage.c][rkipc_storage_para_init]:DevAttr set: AutoDel--1, FreeSizeDel--500~1000, Path--/userdata/video0, Limit--300 [storage.c][rkipc_storage_para_init]:DevAttr set: AutoDel--1, FreeSizeDel--500~1000, Path--/userdata/video1, Limit--300 [storage.c][rkipc_storage_para_init]:DevAttr set: AutoDel--1, FreeSizeDel--500~1000, Path--/userdata/video2, Limit--300 [storage.c][rkipc_storage_auto_delete_init]:mountpath:/userdata,devpath:,devtype:,devattr: getall [storage.c][rkipc_storage_file_scan_thread]:/userdata, /dev/ubi5_0, ubifs, rw,relatime,assert=read-only,ubi=5,vol=0 [storage.c][rkipc_storage_file_scan_thread]:[00:00:07.861813] i is 0, before rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:07.869392] i is 0, after rkipc_sto[ 7.887366] dwc3 ffb00000.usb: device rt rage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:07.893789] i is 1, before rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:07.904382] i is 1, after rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:07.911375] i is 2, before rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:[00:00:07.945398] i is 2, after rkipc_storage_read_file_list [storage.c][rkipc_storage_file_scan_thread]:total_size = 4584, free_size = 4548 getall [storage.c][rkipc_storage_file_monitor_thread]:pHandle->dev_sta.mount_status is 4 [ 8.089598] dwc3 ffb00000.usb: device reset getall getall [ 8.297503] dwc3 ffb00000.usb: device reset getall [ 8.505420] dwc3 ffb00000.usb: device reset getall [ 8.713800] dwc3 ffb00000.usb: device reset getall getall getall getall getall [ 9.350539] dwc3 ffb00000.usb: device reset [ 9.464897] dwc3 ffb00000.usb: device reset getall [ 9.588598] dwc3 ffb00000.usb: device reset getall getall [ 9.793415] dwc3 ffb00000.usb: device reset getall [ 10.002380] dwc3 ffb00000.usb: device reset getall [ 10.209630] dwc3 ffb00000.usb: device reset getall getall [ 10.417522] dwc3 ffb00000.usb: device reset l [ 10.541451] dwc3 ffb00000.usb: device reset getall [ 10.745400] dwc3 ffb00000.usb: device reset getall [ 10.953326] dwc3 ffb00000.usb: device reset getall getall [ 11.162407] dwc3 ffb00000.usb: device reset getall [ 11.434255] dwc3 ffb00000.usb: device reset getall [ 11.499877] dwc3 ffb00000.usb: device reset getall [ 11.705404] dwc3 ffb00000.usb: device reset getall getall [ 11.913327] dwc3 ffb00000.usb: device reset getall [ 12.122219] dwc3 ffb00000.usb: device reset getall [ 12.329599] dwc3 ffb00000.usb: device reset getall getall getall getall [ 12.965364] dwc3 ffb00000.usb: device reset [ 13.083381] dwc3 ffb00000.usb: device reset getall getall [ 13.300676] dwc3 ffb00000.usb: device reset [ 13.366603] dwc3 ffb00000.usb: device reset getall getall [ 13.569407] dwc3 ffb00000.usb: device reset getall [ 13.777314] dwc3 ffb00000.usb: device reset getall getall [ 13.986230] dwc3 ffb00000.usb: device reset getall [ 14.193479] dwc3 ffb00000.usb: device reset getall [ 14.307810] dwc3 ffb00000.usb: device reset [ 14.372776] dwc3 ffb00000.usb: device reset getall [ 14.577298] dwc3 ffb00000.usb: device reset getall getall [ 14.785235] dwc3 ffb00000.usb: device reset getall [ 14.993306] dwc3 ffb00000.usb: device reset getall getall [ 15.265273] dwc3 ffb00000.usb: device reset [ 15.330562] dwc3 ffb00000.usb: device reset getall getall [ 15.529308] dwc3 ffb00000.usb: device reset getall getall getall getall OK Starting NMB services: [ 16.202340] dwc3 ffb00000.usb: device reset getall [ 16.269588] dwc3 ffb00000.usb: device reset getall [ 16.473325] dwc3 ffb00000.usb: device reset getall [ 16.682402] dwc3 ffb00000.usb: device reset getall getall [ 16.888996] dwc3 ffb00000.usb: device reset getall getall getall getall getall getall getall getall getall getall getall getall getall getall getgetall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall OK getall getall getall getall getall getall getall rm: can't remove '/tmp/.pin_diagram.txt': No such file or directory getall /usr/bin/luckfox-config: line 46: warning: command substitution: ignored null byte in input getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall Only Luckfox Pico Ultra /Luckfox Pico Ultra W support RGB getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall Complete configuration loading Found ADC keys device: /dev/input/event0 getall /root/main.py and /root/boot.py not exist ,pass... OK hwclock: can't open '/dev/misc/rtc': No such file or directory RTC does not require time calibration Welcome to luckfox pico luckfox login: getall Password: getall getall getall getall getall getall getall getall getall getall rogetall ogetall tgetall getall getall getall getall getall getall getall Login incorrect luckfox login: getall Password: getall getall lgetall ugetall ckgetall getall fogetall xgetall getall getall getall getall getall getall getall getall getall getall getall getall Login incorrect luckfox login: getall Password: getall getall getall getall getall getall getall rgetall ogetall ogetall t getall getall getall getall getall getall getall getall getall Login incorrect getall getall getall getall getall getall Welcome to luckfox pico luckfox login: getall Password: getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall Login incorrect luckfox login: getall Password: getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall getall Login incorrect luckfox login: getall Password: getall getall getall getall getall getall |
'embeded > luckfox' 카테고리의 다른 글
| luckfox pico mini - ubuntu 이미지, 윈도우에서 굽기 (0) | 2026.09.08 |
|---|---|
| luckfox pico plus update on linux (0) | 2026.09.08 |
| luckfox pico ultra - rknn 예제 (0) | 2026.04.27 |
| luckfox pico ultra 카메라 모션 디텍트 끄기 (0) | 2026.04.27 |
| luckfox pico ultra - rv1106 riscv (0) | 2026.04.24 |
개소리 왈왈/육아관련 주저리2026. 9. 6. 20:54
어우 개 한놈 빨고 뻗음
'개소리 왈왈 > 육아관련 주저리' 카테고리의 다른 글
| 아 몰라 또 질러 ㅋㅋㅋ (0) | 2026.08.31 |
|---|---|
| 피아노 줍줍 (0) | 2026.08.30 |
| 개피곤 (0) | 2026.08.29 |
| 와.. 설마 에어컨 고장? (2) | 2026.08.24 |
| 입추 그리고 시원해짐 (2) | 2026.08.10 |
