구차니의 잡동사니 모음

$ sudo apt-get install libc6-i386

$ ./arm-fsl-linux-gnueabi-gcc

arm-fsl-linux-gnueabi-gcc: no input files

$ sudo apt-get remove libc6-i386

$ ./arm-fsl-linux-gnueabi-gcc

bash: ./arm-fsl-linux-gnueabi-gcc: No such file or directory

Package                Minimum ver   Installed info

-------                -----------   ---------------

glibc-devel            0             not installed

zlib                   0             not installed

zlib-devel             0             not installed

ncurses-devel          0             not installed

m4                     0             not installed

bison                  0             not installed

 559 $app_checks = {

 560     binutils         => 'ar --version 2>/dev/null',

 561     'gcc-c++'        => 'g++ --version 2>/dev/null',

 562     glibc            => 'ldd --version 2>/dev/null',

 563     'glibc-devel'    => sub { -f '/usr/lib/i386-linux-gnu/libm.so' || -f '/usr/lib/i386-linux-gnu/libz.so'},

 564     'glibc-headers'  => sub { -f '/usr/include/stdio.h' },

 565     'libstdc++' => sub {

 566             return system_nb(<<TXT) == 0;

 567 echo '#include <iostream>

 568 int main() { std::cout << "test"; }' | g++ -x c++ - -o /dev/null

 569 TXT

 570                        },

 571     lkc              => 'mconf -h 2>/dev/null',

 572     ncurses          => 'tic -V 2>/dev/null',

 573     'ncurses-devel'  => sub { -f '/usr/include/ncurses.h' },

 574     'rpm-build'      => sub { `rpmbuild --version 2>/dev/null` },

 575     sudo             => 'sudo -V 2>/dev/null',

 576     tcl              => "echo 'puts \$tcl_patchLevel' | tclsh",

 577     texinfo          => sub {

 578                        warn  "WARNING: you may also need to install:"

 579                             ." tetex-fonts, dialog and textex\n"

 580                          unless  -f '/usr/share/texmf/tex/texinfo/texinfo.tex';

 581                         `makeinfo --version 2>/dev/null`;

 582                     },

 583     zlib         => sub { my @f = (glob('/usr/lib/libz.so*'),

 584                                    glob('/lib/libz.so*'),

 585                                    glob('/lib/i386-linux-gnu/libz.so*')  ); @f > 1 ? 1 : 0 },

 586     'zlib-devel' => sub { -f '/usr/include/zlib.h' },

 587 }; 

$ sudo apt-get install libncurses-dev bison perl libwww-perl alien cvs

$ cvs -z3 -d:pserver:anonymous@cvs.savannah.nongnu.org:/sources/ltib co -P ltib

$ cd ltib

$ wget https://community.freescale.com/servlet/JiveServlet/downloadBody/93455-102-3-2835/patch-ltib-ubuntu12.04.sh

$ chmod +x patch-ltib-ubuntu12.04.sh

$ ./patch-ltib-ubuntu12.04.sh

$ sudo visudo

interm ALL = NOPASSWD: /usr/bin/rpm, /opt/ltib/usr/bin/rpm

$ ./ltib 

x86 Linux

    Redhat: 7.3, 8.0, 9.0, Enterprise release 4

    Fedora Core: 1, 2, 3, 4, 5, 8

    Debian: 3.1r0 (stable), unstable, 4.0

    Suse: 8.2, 9.1, 9.2, 10.0, 10.2, 10.3

    Ubuntu 6.10, 7.04, 7.10, 8.04

[링크 : http://ltib.org/documentation-LtibFaq]

12.13.4 USB Recovery Mode

USB boot mode is provided as a fail-safe mechanism for writing system firmware to the boot media. The boot mode is not usually entered by the normal methods of setting the boot pins or OTP, the other methods of entering USB boot mode are referred to generally as recovery mode.

An end user can manually start the recovery mode by holding the recovery switch for several seconds while plugging in USB. Holding the recovery switch is defined as reading the i.MX28 PSWITCH input as a 0x3. There are several switch circuits that will produce this input. The loader also automatically starts recovery mode if a nonrecoverableerror is detected from any boot mode other than USB. disabled completely. Attempts to enter USB boot mode through boot pins, OTP, or recovery methods will result in a chip power-down.

[링크 : http://cache.freescale.com/...=pdf&WT_ASSET=Documentation&fileExt=.pdf]

> help

?       - alias for 'help'

autoscr - DEPRECATED - use "source" command instead

base    - print or set address offset

bdinfo  - print Board Info structure

boot    - boot default, i.e., run 'bootcmd'

bootd   - boot default, i.e., run 'bootcmd'

bootm   - boot application image from memory

bootp   - boot image via network using BOOTP/TFTP protocol

cmp     - memory compare

coninfo - print console devices and information

cp      - memory copy

crc32   - checksum calculation

dhcp    - boot image via network using DHCP/TFTP protocol

echo    - echo args to console

fatinfo - print information about filesystem

fatload - load binary file from a dos filesystem

fatls   - list files in a directory (default /)

go      - start application at address 'addr'

help    - print online help

iminfo  - print header information for application image

imxtract- extract a part of a multi-image

itest   - return true/false on integer compare

loadb   - load binary file over serial line (kermit mode)

loads   - load S-Record file over serial line

loady   - load binary file over serial line (ymodem mode)

loop    - infinite loop on address range

md      - memory display

mii     - MII utility commands

mm      - memory modify (auto-incrementing address)

mmc     - MMC sub system

mmcinfo - mmcinfo <dev num>-- display MMC info

mtest   - simple RAM read/write test

mw      - memory write (fill)

mxs_mmc - MXS specific MMC sub system

nfs     - boot image via network using NFS protocol

nm      - memory modify (constant address)

ping    - send ICMP ECHO_REQUEST to network host

printenv- print environment variables

rarpboot- boot image via network using RARP/TFTP protocol

reset   - Perform RESET of the CPU

run     - run commands in an environment variable

saveenv - save environment variables to persistent storage

setenv  - set environment variables

sleep   - delay execution for some time

source  - run script from memory

tftpboot- boot image via network using TFTP protocol

version - print monitor version

> help cmp

cmp - memory compare

Usage:

cmp [.b, .w, .l] addr1 addr2 count

> help cp

cp - memory copy

Usage:

cp [.b, .w, .l] source target count

> help md

md - memory display

Usage:

md [.b, .w, .l] address [# of objects]

> help mm

mm - memory modify (auto-incrementing address)

Usage:

mm [.b, .w, .l] address

> help mtest

mtest - simple RAM read/write test

Usage:

mtest [start [end [pattern [iterations]]]]

> help mw

mw - memory write (fill)

Usage:

mw [.b, .w, .l] address value [count]

> help nm

nm - memory modify (constant address)

Usage:

nm [.b, .w, .l] address

#define ERROR_DDI_SD_MMC_DEVICE_NOT_SUPPORTED (ERROR_DDI_GROUP | ERROR_DDI_SD_DRIVER_GROUP | 0x14)

0x8020A014 ?

#define ERROR_DDI_SD_MBR_NOT_FOUND (ERROR_DDI_GROUP | ERROR_DDI_SD_DRIVER_GROUP | 0x1D)

0x8020A01D ?