U-Boot 2017.05-15377-gedb23d4 (Aug 24 2017 - 07:09:51 -0300) for ODROID-XU4
CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 (eMMC): 7.3 GiB Info eMMC rst_n_func status = enabled Card did not respond to voltage select! mmc_init: -95, time 11 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 reading boot.ini 9650 bytes read in 2 ms (4.6 MiB/s) cfgload: applying boot.ini... cfgload: setenv initrd_high "0xffffffff" cfgload: setenv fdt_high "0xffffffff" cfgload: setenv macaddr "00:1e:06:61:7a:39" cfgload: setenv vout "hdmi" cfgload: setenv cecenable "false" # false or true cfgload: setenv disable_vu7 "false" # false cfgload: setenv ddr_freq 825 cfgload: setenv external_watchdog "false" cfgload: setenv external_watchdog_debounce "3" cfgload: setenv HPD "true" cfgload: setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0" cfgload: fatload mmc 0:1 0x40008000 zImage reading zImage 5665056 bytes read in 145 ms (37.3 MiB/s) cfgload: fatload mmc 0:1 0x42000000 uInitrd reading uInitrd 12236407 bytes read in 309 ms (37.8 MiB/s) cfgload: setenv fdtloaded "false" cfgload: if test "x${board_name}" = "x"; then setenv board_name "xu4"; fi cfgload: if test "${board_name}" = "xu4"; then fatload mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; setenv fdtloaded "true"; fi reading exynos5422-odroidxu4.dtb 63776 bytes read in 6 ms (10.1 MiB/s) cfgload: if test "${board_name}" = "xu3"; then fatload mmc 0:1 0x44000000 exynos5422-odroidxu3.dtb; setenv fdtloaded "true"; fi cfgload: if test "${board_name}" = "xu3l"; then fatload mmc 0:1 0x44000000 exynos5422-odroidxu3-lite.dtb; setenv fdtloaded "true"; fi cfgload: if test "${fdtloaded}" = "false"; then fatload mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; setenv fdtloaded "true"; fi cfgload: fdt addr 0x44000000 cfgload: setenv hdmi_phy_control "HPD=${HPD} vout=${vout}" cfgload: if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND cfgload: if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi cfgload: if test "${external_watchdog}" = "true"; then setenv external_watchdog "external_watchdog=${external_watchdog} external_watchdog_debounce=${external_watchdog_debounce}"; fi cfgload: setenv bootargs "${bootrootfs} ${videoconfig} ${hdmi_phy_control} ${hid_quirks} smsc95xx.macaddr=${macaddr} ${external_watchdog}" cfgload: dmc ${ddr_freq} cfgload: bootz 0x40008000 0x42000000 0x44000000 Kernel image @ 0x40008000 [ 0x000000 - 0x567120 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12236343 Bytes = 11.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Using Device Tree in place at 44000000, end 4401291f
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.14.37-135 (root@ba3e5121f23a) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Sun Apr 29 23:34:43 -03 2018 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0xb6800000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x418 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu @eed65000 s37452 r8192 d23988 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928 [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 HPD=true vout=hdmi usbhid.quirks=0x0eef:0x0005:0x0004 smsc95xx.macaddr=00:1e:06:61:7a:39 false s5p_mfc.mem=16M [ 0.000000] hdmi: using HDMI mode [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1898380K/2074624K available (8192K kernel code, 654K rwdata, 2344K rodata, 1024K init, 326K bss, 45172K reserved, 131072K cma-reserved, 1157120K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0da3ac0 ( 655 kB) [ 0.000000] .bss : 0xc0dab39c - 0xc0dfcea4 ( 327 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] hperf_hmp: fast CPUs mask: 000000F0 [ 0.000000] hperf_hmp: slow CPUs mask: 0000000F [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000032] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49 [ 0.001620] Console: colour dummy device 80x30 [ 0.002278] console [tty1] enabled [ 0.002319] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002360] pid_max: default: 32768 minimum: 301 [ 0.002547] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002588] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003443] CPU: Testing write buffer coherency: ok [ 0.004336] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.020050] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.020659] ARM CCI driver probed [ 0.020891] Exynos MCPM support installed [ 0.027992] Hierarchical SRCU implementation. [ 0.043991] smp: Bringing up secondary CPUs ... [ 0.072369] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.096326] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.124319] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.152386] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.172371] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.180666] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.188664] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.188815] smp: Brought up 1 node, 8 CPUs [ 0.188956] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.188978] CPU: All CPU(s) started in HYP mode. [ 0.188996] CPU: Virtualization extensions available. [ 0.190803] devtmpfs: initialized [ 0.207414] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.207573] hperf_hmp: registered cpufreq transition notifier [ 0.207759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.207794] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.210607] pinctrl core: initialized pinctrl subsystem [ 0.212751] NET: Registered protocol family 16 [ 0.218407] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.224452] cpuidle: using governor menu [ 0.225264] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.225292] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.233593] exynos-audss-clk 3810000.audss-clock-controller: epll 180633609 [ 0.256150] EXYNOS5420 PMU initialized [ 0.299207] usbcore: registered new interface driver usbfs [ 0.299277] usbcore: registered new interface driver hub [ 0.299426] usbcore: registered new device driver usb [ 0.299865] i2c-gpio soc:i2c-hdmi: using pins 177 (SDA) and 178 (SCL) [ 0.300441] s3c-i2c 12c70000.i2c: slave address 0x00 [ 0.300468] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz [ 0.300696] s3c-i2c 12c70000.i2c: i2c-1: S3C I2C adapter [ 0.301200] media: Linux media interface: v0.10 [ 0.301248] Linux video capture interface: v2.00 [ 0.301359] pps_core: LinuxPPS API ver. 1 registered [ 0.301377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.301643] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 0.302465] Advanced Linux Sound Architecture Driver Initialized. [ 0.303691] clocksource: Switched to clocksource mct-frc [ 0.363576] VFS: Disk quotas dquot_6.6.0 [ 0.363656] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.377233] NET: Registered protocol family 2 [ 0.377811] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.377903] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.378070] TCP: Hash tables configured (established 8192 bind 8192) [ 0.378181] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.378232] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.378440] NET: Registered protocol family 1 [ 0.379091] RPC: Registered named UNIX socket transport module. [ 0.379113] RPC: Registered udp transport module. [ 0.379132] RPC: Registered tcp transport module. [ 0.379149] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.379359] Trying to unpack rootfs image as initramfs... [ 0.667702] random: fast init done [ 1.037094] Freeing initrd memory: 11952K [ 1.038540] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.039525] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.042959] audit: initializing netlink subsys (disabled) [ 1.043178] audit: type=2000 audit(1.036:1): state=initialized audit_enabled=0 res=1 [ 1.043780] Initialise system trusted keyrings [ 1.043965] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.050914] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.051827] NFS: Registering the id_resolver key type [ 1.051863] Key type id_resolver registered [ 1.051881] Key type id_legacy registered [ 1.051910] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.051963] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 1.056476] Key type asymmetric registered [ 1.056499] Asymmetric key parser 'x509' registered [ 1.056564] bounce: pool size: 64 pages [ 1.056626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.056839] io scheduler noop registered [ 1.056860] io scheduler deadline registered [ 1.057108] io scheduler cfq registered (default) [ 1.057128] io scheduler mq-deadline registered [ 1.057146] io scheduler kyber registered [ 1.057382] io scheduler bfq registered [ 1.059789] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator [ 1.060767] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator [ 1.060850] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator [ 1.061218] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator [ 1.061299] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator [ 1.066044] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 1.066072] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 1.068668] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.068695] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.071234] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.071260] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.072295] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 1.072322] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.137466] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.139755] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 1.140160] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.140544] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 2.039629] console [ttySAC2] enabled [ 2.043609] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 2.054213] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu [ 2.060232] iommu: Adding device 14450000.mixer to group 0 [ 2.067268] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517 [ 2.073129] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu [ 2.079920] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu [ 2.087241] iommu: Adding device 10850000.g2d to group 1 [ 2.092828] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully probed. [ 2.101418] exynos-rot 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu [ 2.107768] iommu: Adding device 11c00000.rotator to group 2 [ 2.113726] exynos-rot 11c00000.rotator: The exynos rotator is probed successfully [ 2.121672] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully. [ 2.132108] mali 11800000.mali: Continuing without Mali regulator control [ 2.138363] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0 [ 2.144435] mali 11800000.mali: Protected mode not available [ 2.150013] devfreq devfreq0: Couldn't update frequency transition information. [ 2.157524] mali 11800000.mali: Probed as mali0 [ 2.170945] brd: module loaded [ 2.173172] libphy: Fixed MDIO Bus: probed [ 2.176973] usbcore: registered new interface driver r8152 [ 2.182150] usbcore: registered new interface driver cdc_ether [ 2.187936] usbcore: registered new interface driver cdc_subset [ 2.195862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.200962] ehci-exynos: EHCI EXYNOS driver [ 2.205437] exynos-ehci 12110000.usb: EHCI Host Controller [ 2.210591] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 2.218528] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000 [ 2.239743] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 2.244580] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.251072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.258259] usb usb1: Product: EHCI Host Controller [ 2.263136] usb usb1: Manufacturer: Linux 4.14.37-135 ehci_hcd [ 2.268915] usb usb1: SerialNumber: 12110000.usb [ 2.274058] hub 1-0:1.0: USB hub found [ 2.277272] hub 1-0:1.0: 3 ports detected [ 2.282132] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.287382] ohci-exynos: OHCI EXYNOS driver [ 2.291759] exynos-ohci 12120000.usb: USB Host Controller [ 2.296923] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 2.304643] exynos-ohci 12120000.usb: irq 80, io mem 0x12120000 [ 2.371976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.377326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.385127] usb usb2: Product: USB Host Controller [ 2.389277] usb usb2: Manufacturer: Linux 4.14.37-135 ohci_hcd [ 2.395081] usb usb2: SerialNumber: 12120000.usb [ 2.400208] hub 2-0:1.0: USB hub found [ 2.403403] hub 2-0:1.0: 3 ports detected [ 2.409594] mousedev: PS/2 mouse device common for all mice [ 2.415083] i2c /dev entries driver [ 2.432916] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV [ 2.455588] vdd_sd: Bringing 3300000uV into 2800000-2800000uV [ 2.478468] vdd_ldo30: Bringing 1800000uV into 3300000-3300000uV [ 3.550053] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0 [ 3.558957] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu [ 3.564530] iommu: Adding device 11f50000.jpeg to group 3 [ 3.570207] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video30 [ 3.577124] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video31 [ 3.584062] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec [ 3.589719] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu [ 3.596498] iommu: Adding device 11f60000.jpeg to group 4 [ 3.602174] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video32 [ 3.609090] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video33 [ 3.616034] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec [ 3.622577] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu [ 3.628553] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu [ 3.635415] iommu: Adding device 11000000.codec to group 5 [ 3.658553] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers [ 3.666261] (NULL device *): Direct firmware load for s5p-mfc-v8.fw failed with error -2 [ 3.674235] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 3.684792] s5p-mfc 11000000.codec: decoder registered as /dev/video10 [ 3.691277] s5p-mfc 11000000.codec: encoder registered as /dev/video11 [ 3.700100] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu [ 3.706545] iommu: Adding device 13e00000.video-scaler to group 6 [ 3.713826] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu [ 3.720413] iommu: Adding device 13e10000.video-scaler to group 7 [ 3.756429] device-mapper: uevent: version 1.0.3 [ 3.759942] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 3.782270] sdhci: Secure Digital Host Controller Interface driver [ 3.787003] sdhci: Copyright(c) Pierre Ossman [ 3.791525] Synopsys Designware Multimedia Card Interface Driver [ 3.797887] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.804219] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.810565] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 3.815960] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo [ 3.825350] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 3.852169] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.880253] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.885704] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.893104] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 3.899494] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo [ 3.928164] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.953657] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 3.963071] mmc0: new HS200 MMC card at address 0001 [ 3.967272] ledtrig-cpu: registered to indicate activity on CPUs [ 3.967986] mmcblk0: mmc0:0001 008G92 7.28 GiB [ 3.968648] mmcblk0boot0: mmc0:0001 008G92 partition 1 4.00 MiB [ 3.969304] mmcblk0boot1: mmc0:0001 008G92 partition 2 4.00 MiB [ 3.969957] mmcblk0rpmb: mmc0:0001 008G92 partition 3 512 KiB [ 3.971237] mmcblk0: p1 p2 [ 3.998753] s5p-secss 10830000.sss: s5p-sss driver registered [ 4.003861] hidraw: raw HID events driver (C) Jiri Kosina [ 4.017115] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp [ 4.022385] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp [ 4.028962] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp [ 4.035653] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp [ 4.046424] NET: Registered protocol family 17 [ 4.049419] NET: Registered protocol family 15 [ 4.053860] Key type dns_resolver registered [ 4.058433] Registering SWP/SWPB emulation handler [ 4.063197] registered taskstats version 1 [ 4.066907] Loading compiled-in X.509 certificates [ 4.077286] Key type encrypted registered [ 4.098466] OF: graph: no port node found in /soc/hdmi@14530000 [ 4.103804] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations [ 4.110764] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0965fa4) [ 4.117317] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0966644) [ 4.123893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.130476] [drm] No driver support for vblank timestamp query. [ 4.310514] Console: switching to colour frame buffer device 240x67 [ 4.331557] exynos-drm exynos-drm: fb0: frame buffer device [ 4.337545] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0 [ 4.346122] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 4.350203] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3 [ 4.358058] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 4.366539] xhci-hcd xhci-hcd.3.auto: irq 150, io mem 0x12000000 [ 4.372590] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.379222] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.386415] usb usb3: Product: xHCI Host Controller [ 4.391251] usb usb3: Manufacturer: Linux 4.14.37-135 xhci-hcd [ 4.397062] usb usb3: SerialNumber: xhci-hcd.3.auto [ 4.402208] hub 3-0:1.0: USB hub found [ 4.405650] hub 3-0:1.0: 1 port detected [ 4.409722] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 4.415003] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4 [ 4.422705] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.430795] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.437453] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.444646] usb usb4: Product: xHCI Host Controller [ 4.449481] usb usb4: Manufacturer: Linux 4.14.37-135 xhci-hcd [ 4.455295] usb usb4: SerialNumber: xhci-hcd.3.auto [ 4.460427] hub 4-0:1.0: USB hub found [ 4.463883] hub 4-0:1.0: 1 port detected [ 4.469773] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 4.473841] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5 [ 4.481687] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 4.490171] xhci-hcd xhci-hcd.6.auto: irq 151, io mem 0x12400000 [ 4.496222] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.502865] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.510061] usb usb5: Product: xHCI Host Controller [ 4.514897] usb usb5: Manufacturer: Linux 4.14.37-135 xhci-hcd [ 4.520710] usb usb5: SerialNumber: xhci-hcd.6.auto [ 4.527710] hub 5-0:1.0: USB hub found [ 4.531862] hub 5-0:1.0: 1 port detected [ 4.536333] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 4.542195] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6 [ 4.550280] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.558854] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.566052] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.573695] usb usb6: Product: xHCI Host Controller [ 4.578980] usb usb6: Manufacturer: Linux 4.14.37-135 xhci-hcd [ 4.585219] usb usb6: SerialNumber: xhci-hcd.6.auto [ 4.590788] hub 6-0:1.0: USB hub found [ 4.594941] hub 6-0:1.0: 1 port detected [ 4.600209] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 4.606274] rtc rtc1: invalid alarm value: 1900-1-1 0:0:0 [ 4.612241] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 4.620000] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz) [ 4.629201] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz) [ 4.638090] exynos-bus: new bus device registered: soc:bus_fsys_apb (200000 KHz ~ 200000 KHz) [ 4.647364] exynos-bus: new bus device registered: soc:bus_fsys (200000 KHz ~ 200000 KHz) [ 4.656399] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz) [ 4.665584] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz) [ 4.674504] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz) [ 4.683347] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz) [ 4.692359] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz) [ 4.701228] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz) [ 4.710475] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz) [ 4.719456] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz) [ 4.728692] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz) [ 4.738124] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz) [ 4.747108] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz) [ 4.756704] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz) [ 4.765577] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory [ 4.773952] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory [ 4.782851] odroid-audio sound: multicodec <-> 3830000.i2s mapping ok [ 4.792846] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01 00:03:00 UTC (946684980) [ 4.806614] ALSA device list: [ 4.809936] #0: Odroid-XU4 [ 4.814148] Freeing unused kernel memory: 1024K Loading, please wait... starting version 237 [ 4.915772] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 5.076279] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610 [ 5.083400] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.090943] usb 3-1: Product: USB2.0 Hub [ 5.095267] usb 3-1: Manufacturer: GenesysLogic [ 5.127221] hub 3-1:1.0: USB hub found [ 5.131961] hub 3-1:1.0: 2 ports detected [ 5.207935] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 5.234527] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616 [ 5.241620] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.249082] usb 4-1: Product: USB3.0 Hub [ 5.253320] usb 4-1: Manufacturer: GenesysLogic [ 5.271286] hub 4-1:1.0: USB hub found [ 5.275870] hub 4-1:1.0: 2 ports detected [ 5.783810] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 5.812614] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153 [ 5.821964] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 5.831709] usb 6-1: Product: USB 10/100/1000 LAN [ 5.838991] usb 6-1: Manufacturer: Realtek [ 5.845603] usb 6-1: SerialNumber: 000001000000 [ 6.022383] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd [ 6.088696] r8152 6-1:1.0 eth0: v1.09.9 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.31.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p2] fsck.ext4 -y -C0 /dev/mmcblk0p2 e2fsck 1.44.1 (24-Mar-2018) rootfs: clean, 169524/294912 files, 948760/11[ 6.356064] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) 68896 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 6.556577] systemd[1]: System time before build time, advancing clock. [ 6.598389] NET: Registered protocol family 10 [ 6.604053] Segment Routing with IPv6 [ 6.609897] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.626554] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.650912] systemd[1]: Detected architecture arm.
Welcome to Ubuntu 18.04 LTS!
[ 6.676078] systemd[1]: Set hostname to <odroid>. [ 6.926833] random: systemd: uninitialized urandom read (16 bytes read) [ 6.934199] systemd[1]: Reached target User and Group Name Lookups. [ OK ] Reached target User and Group Name Lookups. [ 6.955778] random: systemd: uninitialized urandom read (16 bytes read) [ 6.963439] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.983781] random: systemd: uninitialized urandom read (16 bytes read) [ 6.991224] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 7.015924] random: systemd: uninitialized urandom read (16 bytes read) [ 7.023658] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 7.051789] random: systemd: uninitialized urandom read (16 bytes read) [ 7.059196] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 7.083793] random: systemd: uninitialized urandom read (16 bytes read) [ 7.091455] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 7.111795] random: systemd: uninitialized urandom read (16 bytes read) [ 7.119310] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 7.139774] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Reached target Slices. [ 7.159756] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Listening on fsck to fsckd communication Socket. [ 7.183778] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Listening on Journal Socket. Starting Load Kernel Modules... Starting Create list of required st…ce nodes for the current kernel... Starting Set the console keyboard layout... Mounting Kernel Debug File System... [ OK ] Created slice system-systemd\x2dfsck.slice. Mounting POSIX Message Queue File System... Starting Uncomplicated firewall... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Journal Audit Socket. Starting Journal Service... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Control Socket. Starting Remount Root and Kernel File Systems... [ OK ] Reached target Swap. [ 7.457799] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Started Journal Service. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Set the console keyboard layout. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Uncomplicated firewall. [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Started udev Coldplug all Devices. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Found device /dev/ttySAC2. [ OK ] Reached target Sound Card. [ OK ] Found device /dev/disk/by-label/boot. Starting File System Check on /dev/disk/by-label/boot... [ OK ] Started File System Check Daemon to report status. [ OK ] Started File System Check on /dev/disk/by-label/boot. Mounting /media/boot... [ OK ] Mounted /media/boot. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Tell Plymouth To Write Out Runtime Data... Starting Set console font and keymap... Starting Raise network interfaces... [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Set console font and keymap. Starting Update UTMP about System Boot/Shutdown... Starting Network Name Resolution... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Raise network interfaces. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started CUPS Scheduler. [ OK ] Reached target Paths. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Message of the Day. [ OK ] Listening on CUPS Scheduler. Starting Socket activation for snappy daemon. [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt download activities. [ OK ] Started Trigger anacron every hour. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Timers. [ OK ] Listening on Socket activation for snappy daemon. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Set the CPU Frequency Scaling governor. Starting System Logging Service... Starting Save/Restore Sound Card State... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started Run anacron jobs. Starting LSB: automatic crash report generation... [ OK ] Started CUPS Scheduler. Starting Dispatcher daemon for systemd-networkd... Starting LSB: Speech Dispatcher... Starting Accounts Service... Starting Modem Manager... [ OK ] Started Regular background program processing daemon. Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting Disk Manager... Starting Login Service... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Login Service. Starting Network Manager... Starting WPA supplicant... Starting Initialize hardware monitoring sensors... Starting Snappy daemon... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Initialize hardware monitoring sensors. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started LSB: automatic crash report generation. [ OK ] Started LSB: Speech Dispatcher. [ OK ] Started WPA supplicant. Starting Hostname Service... Starting Authorization Manager... [ OK ] Started Make remote CUPS printers available locally. [ OK ] Started Snappy daemon. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Started Authorization Manager. [ OK ] Started Accounts Service. [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Started Modem Manager. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started Hostname Service. [ OK ] Started Network Manager. Starting Network Manager Script Dispatcher Service... Starting Network Manager Wait Online... [ OK ] Reached target Network. Starting OpenVPN service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started OpenVPN service. [ OK ] Started Permit User Sessions. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Disk Manager. Starting Light Display Manager... [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Light Display Manager. [ OK ] Created slice User Slice of lightdm. Starting User Manager for UID 110... [ OK ] Started Session c1 of user lightdm. [ OK ] Started User Manager for UID 110. Mounting FUSE Control File System... [ OK ] Mounted FUSE Control File System. [ 18.738522] rc.local[900]: * Resizing / [ 18.752717] rc.local[900]: resize2fs 1.44.1 (24-Mar-2018) [ 19.263910] rc.local[900]: Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required [ 19.284373] rc.local[900]: old_desc_blocks = 1, new_desc_blocks = 1 [ 19.300531] rc.local[900]: The filesystem on /dev/mmcblk0p2 is now 1875456 (4k) blocks long.
Ubuntu 18.04 LTS odroid ttySAC2
odroid login: |
