There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz
ESP32 contains two low-power Xtensa® 32-bit LX6 microprocessors. The internal memory includes: • 448 KBytes ROM for booting and core functions. • 520 KBytes on-chip SRAM for data and instruction. • 8 KBytes SRAM in RTC, which is called RTC SLOW Memory and can be accessed by the co-processor during the Deep-sleep mode. • 8 KBytes SRAM in RTC, which is called RTC FAST Memory and can be used for data storage and accessed by the main CPU during RTC Boot from the Deep-sleep mode. • 1 Kbit of EFUSE, of which 256 bits are used for the system (MAC address and chip configuration) and the remaining 768 bits are reserved for customer applications, including Flash-Encryption and Chip-ID.
데이터 시트 찾아보니 main.py를 쓰면 된다고 언급되어 있다. (최상위 디렉토리에 넣으면 안되는건가? 왜 안되지? ㅠㅠ)
If you "save a file to the device" and give it the special name main.py, then MicroPython starts running that script as soon as power is supplied to Raspberry Pi Pico in the future.
SCCB Interface The Serial Camera Control Bus(SCCB) interface controls the CAMERACHIP operation. Refer to OmniVision Technologies Serial Camera Control Bus (SCCB)