구차니의 잡동사니 모음

# Menuet32 kernel setup

#

# This file lists the video, mouse and RAM setup that the kernel will use.

# Blank lines, or lines beginning with # are ignored - they are comments.

# The format for each line is: [KERNEL PARAMETER] value

# The allowable values for 'KERNEL PARAMETER' and corresponding 'value' are

# defined below. The file may be Unix or DOS format; <cr>s are ignored.

# A value of 0 => ask the user

# Select the video mode to use: there are 3 basic groups.

# Specify a value within the appropriate group.

# Vesa 2.0+ 16 M LFB:  {1} 640x480, {2} 800x600, {3} 1024x768, {4} 1280x1024

# Vesa 1.2  16 M Bnk:  {5} 640x480, {6} 800x600, {7} 1024x768, {8} 1280x1024

# EGA/CGA   256 Cols:  {9} 320x200, {A} VGA: 16 Color 640x480.

# {9} => VGA mode 0x13. {A} => VGA mode 0x12.

[VIDEO] 0

# Direct LFB write, paging (available VESA 2+ only)

# Use predefined settings or probe video mode.

# Probing enabled {1} no, {2} yes.

[PROBE] 0

# Hardware accelerated graphics

# Vesa 2.0+ (only): MTRR graphics acceleration {1} yes, {2} no.

[VACCEL] 0

# Mouse at: {1} PS/2 (USB), {2} Com1, {3} Com2.

[MOUSE] 0

# Amount of RAM (MB) available on the system

# {1} 32, {2} 64, {3} 128, {4} 256, {5} 512,{6} 1024, {7} 2048.

[RAM] 0

# Cached information from floppy or hard disk (boot device)

# When floppy is selected, the entire disk is copied to RAM as a RAM_Disk (/RD)

# Load disk image from: {1} floppy (default), {2} hd/msetup.exe (hdboot.txt), 

# {3} use preloaded ram-image from kernel restart.

[RSOURCE] 0 

#

#  MenuetOS 64 configuration

#

config_version          = 0x000025   # For kernel.

# Default screen resolution

screen_resolution       = 0x000002   # 1 = 640x480  , 2 = 800x600

                                     # 3 = 1024x768 , 4 = 1280x1024

                                     # 5 = 1440x900 , 9 = Custom

# Custom resolution must be supported by both

# graphics card and display.

custom_res_x            = 00000000   # Custom X resolution

custom_res_y            = 00000000   # Custon Y resolution

# PS/2 Mouse settings

mouse_scroll_wheel      = 0x000000   # 0/1 = disabled/enabled

# Window transparency

#

# 512MB of RAM required for resolutions up to 1280x1024.

# 1GB of RAM required for HD resolutions.

# Define with parameter amount_of_ram.

window_transparency     = 0x000001   # 0 = Disabled

                                     # 1 = Enabled for Title and Frames

                                     # 2 = Enabled for Title, Menu and Frames

transparency_opacity    = 0x000002   # 0 = 75:25, 1 = 50:50, 2 = 25:75

# Memory

#

# 128 MB required (0x080)

amount_of_ram           = 0x000200   # 0x100 = 256 MB, 0x200 = 512 MB

# Verify the amount for ram from Bios

ram_verify              = 0x000001   # 0x000 = Disabled, 0x001 = Enabled

# Verify OS memory map from Bios

#

# Map:0x8000-0x58000,1M-14M,16M-amount_of_ram

map_verify              = 0x000001   # 0x000 = Disabled, 0x001 = Enabled

# Memory acceleration

#

# Mtrr_default works without defining mtrr_vesa_lfb or mtrr_mask.

# Some multiprocessor systems require enabling SMP at parameter smp_enable.

# Unstable, if defined by BIOS at bootup.

mtrr_default            = 0x000100   # 0x006 = write-back, 0x100 = disabled

# Graphics acceleration

#

# Mtrr_mask is required for defining mtrr_vesa_lfb

# Unstable, if defined by BIOS at bootup.

mtrr_vesa_lfb           = 0x000100     # 0x001 = write-combine, 0x100 = disabled

mtrr_mask               = 0xffffffff   # 4 Gigabytes (default), CPU dependent

# Mtrr cache writeback

#

# If display update seems late or out of sync, enabling this feature

# results to faster display updates.

mtrr_wbinvd             = 0x000000     # 0x000 = disabled, 0x001 = enabled

# Mtrr cache delay

#

# If display has residuals from mouse or other gui events, increasing 

# this value results to cleaner display updates.

mtrr_delay              = 00000010     # 5-1000ms, default:10ms

# USB 2.0 (ehci)

#

# Webcam, TV/Radio, Printer, Mass storage (read/write, Fat32)

#

# Note: 1) USB Legacy support in BIOS must be disabled, unless

#          the computer boots from USB device. See usb_legacy_disable.

#       2) Sandisk flash drives and regular backups are recommended,

#          since not all of the mass storage functions are supported.

#       3) If motherboard has multiple ehci controllers, the first pci 

#          device is activated.

usb_enable              = 0x000000     # 0x000 = Disabled, 0x001 = Enabled

# USB 2.0 - Disable BIOS legacy support after bootup

#

# If the computer boots from USB drive, enabling this feature

# enables access to USB drive when Menuet is running.

# Not all BIOSs support this feature.

usb_legacy_disable      = 0x000000     # 0x000 = Disabled, 0x001 = Enabled

# USB 2.0 - Ehci driver cache mode

#

# To debug cache coherency between driver and controller.

# 0x000       = Normal     (non-cacheable pages)

# 0x001/0x002 = Invalidate (cache writeback and invalidate,slower)

#                          (0x001/0x002=all cpus/single cpu)

#                          (Amd sb600 and sb700 rev 3a & 3b)

usb_ehci_cache_mode     = 0x000000     # 0x000 = Normal

                                       # 0x001/0x002 = Invalidate

# USB 1.X (ohci/amd - uhci/intel)

#

# USB keyboard and mouse

usb_ohci_enable         = 0x000000     # 0x000 = Disabled, 0x001 = Enabled

usb_uhci_enable         = 0x000000     # 0x000 = Disabled, 0x001 = Enabled

# Display window content while moving

display_window          = 00000001  # 0x000 = Disabled, 0x001 = Enabled

display_interval        = 00000025  # times/second

# Window skin

window_skin             = '/FD/1/SKIN.BMP'

# Fat12 floppy

fd_1_enable             = 0x000001  # 0 = disable, 1 = enable

fd_1_write              = 0x000000  # 0/1 = disable/enable direct write

# Fat32 partition

hd_1_enable             = 0x000000  # 0x000 disabled, 0x001 enabled

hd_1_base               = 0x000000  # 0x1f0 primary, 0x170 secondary

hd_1_id                 = 0x000000  # 0x00 master, 0x10 slave

hd_1_partition          = 0x000001  # 1 first, fixed to first now

hd_1_irq                = 0x000000  # hd 1 irq, not yet implemented

# CD/DVD

cd_1_enable             = 0x000000  # 0x000 disabled, 0x001 enabled

cd_1_base               = 0x000000  # 0x1f0 primary, 0x170 secondary

cd_1_id                 = 0x000000  # 0x00 master, 0x10 slave

cd_1_irq                = 0x000000  # cd 1 irq, not yet implemented

# System directory

system_directory        = '/FD/1/'  # System file location

# Window shape

window_corners          = 0x000000  # 0 = round, 1 = sharp

# Network at boot

network_driver          = '/FD/1/DRIVER/I8254X' # Ethernet driver

network_card_enable     = 0x00000000  # 0/1 = network card disabled/enabled

                                      # When enabled, requires also selecting 

                                      # ethernet interface at network_config

network_ip              = 0x1800a8c0  # 192.168.0.24

network_gateway         = 0x0100a8c0  # 192.168.0.1

network_subnet_mask     = 0x00FFFFFF  # 255.255.255.0

network_dns             = 0x0100a8c0  # 192.168.0.1

network_config          = 0x03f80400  # Bits 16- Com port

                                      # Bits 08- Com IRQ

                                      # Bit  07  Server assigned

                                      # Bits 00- Interface 0=disabled 

                                      #                    3=ethernet

# Audio at boot

audio_driver            = '/FD/1/DRIVER/INTELHDA'

audio_card_enable       = 0x00000000  # 0/1 = audio card disabled/enabled

# Midi at boot

midi_driver             = '/FD/1/DRIVER/MPU401'

midi_card_enable        = 0x00000000  # 0/1 = midi card disabled/enabled

# Graphics

graphics_driver         = '/FD/1/DRIVER/GRX'

graphics_driver_enable  = 00000000   # 0/1 = no/yes

graphics_boot_driver    = 00000000   # 0/1 = vesa/driver

graphics_boot_x         = 00000000   # Driver boot X resolution

graphics_boot_y         = 00000000   # Driver boot Y resolution

graphics_boot_hz        = 00000000   # Driver boot frequency

# Email

email_pop_server        = 'pop.server'

email_pop_user          = 'Username'

email_smtp_server       = 'smtp.server'

email_smtp_user         = 'Username@smtp.server'

# File browser

#

# 00XY - X=Contents(0/1=close/open), Y=Paths(0/1=close/open)

file_browser_setup      = 00000001   # Contents,Paths

# Background at bootup

#

# bmp, png, jpg or gif

# [Default] = Default Menuet background

background              = '/fd/1/bgr.jpg'

# Main Menu Position

#

# 0 = up, 1 = down

main_menu_position      = 0x000001

# Multi-Processor support

#

# Upto 8 processors are supported. Pressing ctrl-alt-pageup

# moves all processes to CPU-0 and disables SMP.

smp_enable              = 0x000000   # 0x000/0x001 = disabled/enabled

# MCE

#

# CPU is disabled at machine check exception 

# (dot at top-left screen)

mce_enable              = 0x000000   # 0x000/0x001 = disabled/enabled

# Keyboard layout

#

# See app kbd-map for values (1=fin,2=eng,3=est,..)

keyboard_layout         = 00000000   # 000 = Default western

# System font default size

system_font_size        = 0x00000A   # Values: 0x009-0x00C

# Font type

#

# 0x000/0x001/0x002 = Upper/Capitalized/Lower

icon_font               = 0x000000   # 0x000-0x002

main_menu_font          = 0x000000   # 0x000-0x002

file_browser_font       = 0x000000   # 0x000-0x002

# Configuration edit delay

configuration_delay     = 0x000003   # Seconds 

$ sudo apt-get install motion

$ sudo vi /etc/motion/motion.conf

daemon on

width 640

height 480

framerate 15

webcam_maxrate 15

webcam_localhost off

$ sudo vi /etc/default/motion

start_motion_daemon=yes

arm_freq=850

core_freq=375

gpu_mem_256=112

gpu_mem_512=144

hdmi_ignore_cec_init=1

disable_overscan=1

start_x=1 

OpenELEC:~ # dmesg | grep -i lirc

[    6.239973] lirc_dev: IR Remote Control driver registered, major 248

[    6.263055] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.

[    7.160117] lirc_rpi: auto-detected active high receiver on GPIO pin 18

[    7.160510] lirc_rpi lirc_rpi.0: lirc_dev: driver lirc_rpi registered at minor = 0

[    7.160530] lirc_rpi: driver registered!

[   15.617057] input: lircd as /devices/virtual/input/input3 

OpenELEC:~ # cat /sys/kernel/debug/gpio

GPIOs 0-53, bcm2708_gpio:

 gpio-16  (led0                ) out hi

 gpio-17  (lirc_rpi ir/out     ) in  lo

 gpio-18  (lirc_rpi ir/in      ) in  lo 

OpenELEC:~ # cat /proc/interrupts

            CPU0

  3:      43907   ARMCTRL  BCM2708 Timer Tick

 16:          0   ARMCTRL  bcm2708_fb dma

 24:        300   ARMCTRL  DMA IRQ

 25:       1257   ARMCTRL  DMA IRQ

 32:      65605   ARMCTRL  dwc_otg, dwc_otg_pcd, dwc_otg_hcd:usb1

 52:          0   ARMCTRL  BCM2708 GPIO catchall handler

 65:         12   ARMCTRL  ARM Mailbox IRQ

 66:      38115   ARMCTRL  VCHIQ doorbell

 75:          1   ARMCTRL

 79:          4   ARMCTRL  bcm2708_i2c.0, bcm2708_i2c.1

 80:          0   ARMCTRL  bcm2708_spi.0

 84:       5984   ARMCTRL  mmc0

188:          0      GPIO  lirc_rpi

FIQ:              usb_fiq

Err:          0 

OpenELEC:~ # lsmod | grep irc

lirc_rpi                6120  3

lirc_dev                7581  1 lirc_rpi

rc_core                15351  1 lirc_dev