hdmi pinout

HDMI 핀 배열 및 신호 관련 정보 검색

[링크 : http://pinouts.ru/visual/gen/hdmi.jpg]

[링크 : http://pinouts.ru/Video/hdmi_pinout.shtml]

TMDS는 0/1/2+CLK로 구성되고

CEC와 DDC 그리고 Hotplug 및 5V 전원이 공급된다.

Pins 1 through 9 carry the three TMDS data channels (Transition Minimized Differential Signaling – the technology that allows DVI and HDMI to send high-speed digital data), three pins per channel. TMDS data includes both video and audio information, and each channel has three separate lines for + values, - values, and a ground or data shield. Pins 10 through 12 carry data for the TMDS clock channel, which helps keep the signals in synchronization. As with the TMDS data channels, there are separate lines for + values, - values, and a data shield. Pin 13 is carries the CEC (Consumer Electronics Control) channel, used for sending command and control data between connected devices. Pin 14 is reserved for future use. Pins 15 and 16 are dedicated to the DDC (Display Data Channel), used for communicating EDID (Extended Display Identification Channel) information between devices. Pin 17 is a data shield for the CEC and DDC channels. Pin 18 carries a low-voltage (+5V) power supply. Pin 19 is the Hot Plug Detect, dedicated to monitoring power up/down and plug/unplug events.

[링크 : https://www.hdmi.org/installers/insidehdmicable.aspx]

데이터는 8b/10b로 인코딩 됨

Both HDMI and DVI use TMDS to send 10-bit characters that are encoded using 8b/10b encoding

[링크 : https://en.wikipedia.org/wiki/HDMI]

2.8V~3.3V로 표현.. TMDS니까 디퍼런셜 라인의 경우 어떻게 표현되려나?

디지털이니까 0과 1만 뒤집어 주면 되려나?

Basics  HDMI leverages on the successful transition minimized differential signaling (TMDS) technology. The differential signals are +3.3 Volts, terminated in 50 Ω with nominal amplitude transitions of 500 mV (+2.8 V to +3.3 V). The voltage swing can vary from 150 mV to 800 mV. The signals have rise times of the order of 100 ps

[링크 : http://download.tek.com/document/61W_17974_6_HR_Letter_0.pdf]

6.2.2 Video Control Signals : HSYNC, VSYNC During the Data Island period, HDMI carries HSYNC and VSYNC signals using encoded bits on Channel 0. During Video Data periods, HDMI does not carry HSYNC and VSYNC and the Sink should assume that these signals remain constant. During Control periods, HDMI carries HSYNC and VSYNC signals through the use of four different control characters on TMDS Channel 0.

[링크 : http://d1.amobbs.com/bbs_upload782111/files_51/ourdev_716302E34B9Q.pdf]

BGR 순서로 채널이 배정되는게 맞는 듯?

[링크 : http://www.wireworldcable.co.uk/hdmi_tech.html]

[링크 : https://www.cablestogo.com/learning/library/digital-signage/intro-to-tmds]