UART2 / 115200bpx / TTL 시리얼 콘솔
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Ultra/UART]
ssh / web 로그인 계정
root / luckfox
80번 포트로 접속하면 웹으로 뜨는데, ip 카메라 예제인듯. 그런데 카메라가 어떻게 해야 인식되냐..
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Ultra/CSI-Camera/]
[링크 : https://wiki.luckfox.com/Luckfox-Pico-Ultra/Login]
| [root@luckfox ]# df -h Filesystem Size Used Available Use% Mounted on /dev/root 5.8G 194.1M 5.4G 3% / devtmpfs 85.4M 0 85.4M 0% /dev tmpfs 85.5M 0 85.5M 0% /dev/shm tmpfs 85.5M 212.0K 85.3M 0% /tmp tmpfs 85.5M 260.0K 85.3M 0% /run /dev/block/by-name/userdata 237.9M 72.0K 228.6M 0% /userdata /dev/block/by-name/oem 487.6M 22.6M 448.9M 5% /oem [root@luckfox ]# free -h total used free shared buff/cache available Mem: 171Mi 16Mi 123Mi 0.0Ki 31Mi 147Mi Swap: 0B 0B 0B [root@luckfox ]# cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : Generic DT based system Revision : 0000 Serial : 4e9080747fb4b024 [root@luckfox ]# netstat -tl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:5037 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:1935 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:www 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5555 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN netstat: /proc/net/tcp6: No such file or directory |
별 의미는 없지만 시리얼 콘솔 로그
| DDR 306b9977f5 wesley.yao 23/12/21-09:28:37,fwver: v1.15 S5P1 4x f967 rgef1 DDRConf2 DDR3, BW=16 Col=10 Bk=8 CS0 Row=14 CS=1 Size=256MB 924MHz DDR bin out U-Boot SPL board init U-Boot SPL 2017.09 (May 12 2025 - 21:35:32) unknown raw ID 0 0 0 Trying to boot from MMC2 Card did not respond to voltage select! mmc_init: -95, time 20 Card did not respond to voltage select! mmc_init: -95, time 20 spl: mmc init failed with error: -95 Trying to boot from MMC1 Best phase range 0-270 (25 len) Successfully tuned phase to 135, used 4ms ENVF: Primary 0x00000000 - 0x00008000 ENVF: Primary 0x00000000 - 0x00008000 No misc partition Trying fit image at 0x440 sector ## Verified-boot: 0 ## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(0079031a02...) + sha256(7dee96eaea...) + OK ## Checking fdt 0x00260998 ... sha256(9f596c5683...) + OK Total: 405.332/437.95 ms Jumping to U-Boot(0x00200000) U-Boot 2017.09 (May 12 2025 - 21:35:32 +0800) Model: Rockchip RV1106 EVB Board MPIDR: 0xf00 PreSerial: 2, raw, 0xff4c0000 DRAM: 256 MiB Sysmem: init Relocation Offset: 0fd81000 Relocation fdt: 0edfa778 - 0edfede0 CR: M/C/I Using default environment mmc@ffa90000: 0, mmc@ffaa0000: 1 Best phase range 0-270 (25 len) Successfully tuned phase to 135, used 3ms ENVF: Primary 0x00000000 - 0x00008000 ENVF: Primary 0x00000000 - 0x00008000 Bootdev(atags): mmc 0 MMC0: HS200, 200Mhz PartType: ENV DM: v2 No misc partition boot mode: None RESC: 'boot', blk@0x00001ec0 resource: sha256+ FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK Model: Luckfox Pico Ultra W ## retrieving sd_update.txt ... Card did not respond to voltage select! mmc_init: -95, time 20 CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 924000 KHz gpll 1188000 KHz cpll 1000000 KHz aclk_peri_root 400000 KHz hclK_peri_root 200000 KHz pclk_peri_root 100000 KHz aclk_bus_root 300000 KHz pclk_top_root 100000 KHz pclk_pmu_root 100000 KHz hclk_pmu_root 200000 KHz Net: eth0: ethernet@ffa80000 Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image at 0xe8e9740 with size 0x00310000 Fdt Ramdisk skip relocation No misc partition Sysmem Warn: kernel 'reserved-memory' "mmc@3f000"(0x0003f000 - 0x00040000) is overlap with "KERNEL" (0x00008000 - 0x0030d404) sysmem_dump_all: -------------------------------------------------------------------- memory.rgn[0].addr = 0x00000000 - 0x10000000 (size: 0x10000000) memory.total = 0x10000000 (256 MiB. 0 KiB) -------------------------------------------------------------------- allocated.rgn[0].name = "UBOOT" .addr = 0x0edfa750 - 0x10000000 (size: 0x012058b0) allocated.rgn[1].name = "STACK" .addr = 0x0ebfa750 - 0x0edfa750 (size: 0x00200000) allocated.rgn[2].name = "FIT" .addr = 0x0e8e9740 - 0x0ebf9744 (size: 0x00310004) allocated.rgn[3].name = "FDT" .addr = 0x00c00000 - 0x00c0a404 (size: 0x0000a404) allocated.rgn[4].name = "KERNEL" .addr = 0x00008000 - 0x0030d404 (size: 0x00305404) kmem-resv.rgn[0].name = "mmc@3f000" .addr = 0x0003f000 - 0x00040000 (size: 0x00001000) framework malloc_r = 16 MiB framework malloc_f = 512 KiB allocated.total = 0x01a260bc (26 MiB. 152 KiB) -------------------------------------------------------------------- LMB.allocated[0].addr = 0x00008000 - 0x0030d404 (size: 0x00305404) LMB.allocated[1].addr = 0x00c00000 - 0x00c0a404 (size: 0x0000a404) LMB.allocated[2].addr = 0x0e8e9740 - 0x0ebf9780 (size: 0x00310040) LMB.allocated[3].addr = 0x0ebfa750 - 0x10000000 (size: 0x014058b0) reserved.core.total = 0x01a250f8 (26 MiB. 148 KiB) -------------------------------------------------------------------- ## Loading kernel from FIT Image at 0e8e9740 ... Using 'conf' configuration ## Verified-boot: 0 Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x0e8f4340 Data Size: 3166880 Bytes = 3 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: sha256 Hash value: 83fbf25080cf3dda5f8d654c9a9dca84f7bba3cec42e71bc6159184503c38c9b Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 0e8e9740 ... Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x0e8e9f40 Data Size: 41878 Bytes = 40.9 KiB Architecture: ARM Load Address: 0x00c00000 Hash algo: sha256 Hash value: 507d711cc7ef081404434f0b3beb303553eb60dabda6df617ab2486aa350ace6 Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x0e8e9740 to 0x00c00000 Booting using the fdt blob at 0x00c00000 Loading Kernel Image from 0x0e8f4340 to 0x00008000 ... OK kernel loaded at 0x00008000, end = 0x0030d2a0 Using Device Tree in place at 00c00000, end 00c0d395 ## reserved-memory: mmc@3f000: addr=3f000 size=1000 Adding bank: 0x00000000 - 0x10000000 (size: 0x10000000) Total: 819.212/1261.293 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.160 (hxj@luckfox-System-Product-Name) (arm-rockchip830-linux-uclibcgnueabihf-gcc (crosstool-NG 1.24.0) 8.3.0, GN5 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Luckfox Pico Ultra W [ 0.000000] Memory policy: Data cache writeback [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x00000000, size 0 MiB [ 0.000000] Reserved memory: created CMA memory pool at 0x0f600000, size 10 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] cma: Reserved 67584 KiB at 0x0b400000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: user_debug=31 storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal rootwait earlycon=uart85 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 174980K/262144K available (3990K kernel code, 385K rwdata, 1868K rodata, 204K init, 148K bss, 9340K reserved, 77824K cma-re) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000019] Switching to timer-based delay loop, resolution 41ns [ 0.000533] Console: colour dummy device 80x30 [ 0.000573] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000591] pid_max: default: 4096 minimum: 301 [ 0.000748] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000763] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001318] CPU: Testing write buffer coherency: ok [ 0.001870] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.002343] devtmpfs: initialized [ 0.009719] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.009924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009945] futex hash table entries: 16 (order: -5, 192 bytes, linear) [ 0.010023] pinctrl core: initialized pinctrl subsystem [ 0.011146] NET: Registered protocol family 16 [ 0.011575] DMA: failed to allocate 0 KiB pool for atomic coherent allocation [ 0.012090] Registered FIQ tty driver [ 0.012392] thermal_sys: Registered thermal governor 'step_wise' [ 0.012399] thermal_sys: Registered thermal governor 'user_space' [ 0.012607] cpuidle: using governor menu [ 0.027540] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000 [ 0.028149] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000 [ 0.028752] rockchip-gpio ff540000.gpio: probed /pinctrl/gpio@ff540000 [ 0.029453] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000 [ 0.030097] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000 [ 0.030184] rockchip-pinctrl pinctrl: probed pinctrl [ 0.040652] fiq_debugger fiq_debugger.0: IRQ uart_irq not found [ 0.040675] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 0.040942] printk: console [ttyFIQ0] enabled [ 0.041110] Registered fiq debugger ttyFIQ0 [ 0.042242] reg-fixed-voltage vdd-arm: Fixed regulator specified with variable voltages [ 0.042275] reg-fixed-voltage: probe of vdd-arm failed with error -22 [ 0.042901] SCSI subsystem initialized [ 0.043112] usbcore: registered new interface driver usbfs [ 0.043156] usbcore: registered new interface driver hub [ 0.043198] usbcore: registered new device driver usb [ 0.043420] mc: Linux media interface: v0.10 [ 0.043463] videodev: Linux video capture interface: v2.00 [ 0.044544] Advanced Linux Sound Architecture Driver Initialized. [ 0.045022] Bluetooth: Core ver 2.22 [ 0.045087] NET: Registered protocol family 31 [ 0.045098] Bluetooth: HCI device and connection manager initialized [ 0.045114] Bluetooth: HCI socket layer initialized [ 0.045126] Bluetooth: L2CAP socket layer initialized [ 0.045146] Bluetooth: SCO socket layer initialized [ 0.045570] rockchip-cpuinfo cpuinfo: SoC : 11061000 [ 0.045593] rockchip-cpuinfo cpuinfo: Serial : 4e9080747fb4b024 [ 0.045977] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: probe success! [ 0.046827] clocksource: Switched to clocksource arch_sys_counter [ 0.052880] NET: Registered protocol family 2 [ 0.053099] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.053566] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.053598] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.053622] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.053646] TCP: Hash tables configured (established 2048 bind 2048) [ 0.053730] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.053751] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.053874] NET: Registered protocol family 1 [ 0.054359] RPC: Registered named UNIX socket transport module. [ 0.054380] RPC: Registered udp transport module. [ 0.054387] RPC: Registered tcp transport module. [ 0.054394] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.055307] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully! [ 0.056305] Initialise system trusted keyrings [ 0.056545] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.060068] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.060808] NFS: Registering the id_resolver key type [ 0.060867] Key type id_resolver registered [ 0.060876] Key type id_legacy registered [ 0.060918] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.148684] Key type asymmetric registered [ 0.148706] Asymmetric key parser 'x509' registered [ 0.148728] io scheduler mq-deadline registered [ 0.149121] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found [ 0.151798] pwm-backlight backlight: supply power not found, using dummy regulator [ 0.154444] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.154465] dma-pl330 ff420000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.155233] rockchip-pvtm ff240000.pvtm: pvtm@0 probed [ 0.155396] rockchip-pvtm ff390000.pvtm: pvtm@0 probed [ 0.155717] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 0.156248] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.156914] ff4b0000.serial: ttyS1 at MMIO 0xff4b0000 (irq = 38, base_baud = 1500000) is a 16550A [ 0.160977] rockchip-drm display-subsystem: bound ff990000.vop (ops 0xb0424e8c) [ 0.161037] rockchip-rgb ff000000.syscon:rgb: [drm:rockchip_rgb_bind] *ERROR* failed to find panel or bridge: -517 Seeding 256 bits and crediting [ 0.161198] random: crng init done Saving 256 bits of creditable seed for next boot [ 0.164770] panel-simple panel: supply power not found, using dummy regulator Starting syslogd: OK [ 0.173679] brd: module loaded [ 0.178758] loop: module loaded Starting klogd: [ 0.180840] rk_gmac-dwmac ffa80000.ethernet: IRQ eth_lpi not found OK [ 0.181052] rk_gmac-dwmac ffa80000.ethernet: PTP uses main clock [ 0.181098] rk_gmac-dwmac ffa80000.ethernet: no regulator found [ 0.181112] rk_gmac-dwmac ffa80000.ethernet: clock input or output? (input). Running sysctl: [ 0.181123] rk_gmac-dwmac ffa80000.ethernet: Can not read property: tx_delay. [ 0.181133] rk_gmac-dwmac ffa80000.ethernet: set tx_delay to 0xffffffff [ 0.181143] rk_gmac-dwmac ffa80000.ethernet: Can not read property: rx_delay. [ 0.181152] rk_gmac-dwmac ffa80000.ethernet: set rx_delay to 0xffffffff [ 0.181223] rk_gmac-dwmac ffa80000.ethernet: integrated PHY? (yes). OK [ 0.181239] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_rx [ 0.181252] rk_gmac-dwmac ffa80000.ethernet: cannot get clock mac_clk_tx Populating /dev using udev: [ 0.181281] rk_gmac-dwmac ffa80000.ethernet: cannot get clock clk_mac_speed [ 0.181291] rk_gmac-dwmac ffa80000.ethernet: clock input from PHY [ 0.181539] rk_gmac-dwmac ffa80000.ethernet: init for RMII [ 0.181729] rk_gmac-dwmac ffa80000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.181749] rk_gmac-dwmac ffa80000.ethernet: DWMAC4/5 [ 0.181762] rk_gmac-dwmac ffa80000.ethernet: DMA HW capability register supported [ 0.181771] rk_gmac-dwmac ffa80000.ethernet: RX Checksum Offload Engine supported [ 0.181780] rk_gmac-dwmac ffa80000.ethernet: TX Checksum insertion supported [ 0.181789] rk_gmac-dwmac ffa80000.ethernet: Wake-Up On Lan supported [ 0.181796] rk_gmac-dwmac ffa80000.ethernet: TSO supported [ 0.181805] rk_gmac-dwmac ffa80000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.181815] rk_gmac-dwmac ffa80000.ethernet: TSO feature enabled [ 0.181825] rk_gmac-dwmac ffa80000.ethernet: Using 40 bits DMA width [ 0.187999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.188377] phy phy-ff3e0000.usb2-phy.0: illegal mode [ 0.188398] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.188435] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.188599] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000022010010 [ 0.188647] xhci-hcd xhci-hcd.0.auto: irq 66, io mem 0xffb00000 [ 0.189662] hub 1-0:1.0: USB hub found [ 0.189729] hub 1-0:1.0: 1 port detected [ 0.190058] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.190089] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.190115] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.190191] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.190853] hub 2-0:1.0: USB hub found [ 0.190914] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.191247] usbcore: registered new interface driver usb-storage [ 0.191396] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.191413] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 0.192759] rockchip-rtc ff1c0000.rtc: registered as rtc0 [ 0.192833] rockchip-rtc ff1c0000.rtc: setting system clock to 2021-01-01T12:08:37 UTC (1609502917) [ 0.193070] i2c /dev entries driver [ 0.194334] Goodix-TS 3-0014: supply AVDD28 not found, using dummy regulator [ 0.194492] Goodix-TS 3-0014: supply VDDIO not found, using dummy regulator [ 0.194791] Goodix-TS 3-0014: i2c test failed attempt 1: -6 [ 0.226989] Goodix-TS 3-0014: i2c test failed attempt 2: -6 [ 0.266829] Goodix-TS 3-0014: I2C communication failure: -6 [ 0.269367] usbcore: registered new interface driver uvcvideo [ 0.269393] USB Video Class driver (1.1.1) [ 0.270004] Bluetooth: HCI UART driver ver 2.3 [ 0.270022] Bluetooth: HCI UART protocol H4 registered [ 0.270196] cpu cpu0: leakage=15 [ 0.270976] Synopsys Designware Multimedia Card Interface Driver [ 0.271925] dtbocfg: 0.1.0 [ 0.271968] dtbocfg: OK [ 0.273160] dwmmc_rockchip ffa90000.mmc: IDMAC supports 32-bit address mode. [ 0.273203] dwmmc_rockchip ffa90000.mmc: Using internal DMA controller. [ 0.273222] dwmmc_rockchip ffa90000.mmc: Version ID is 270a [ 0.273259] dwmmc_rockchip ffa90000.mmc: DW MMC controller at irq 55,32 bit host data width,256 deep fifo [ 0.273366] mmc_host mmc0: card is non-removable. [ 0.273601] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.274166] dwmmc_rockchip ffaa0000.mmc: No normal pinctrl state [ 0.274190] dwmmc_rockchip ffaa0000.mmc: No idle pinctrl state [ 0.274337] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode. [ 0.274370] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller. [ 0.274385] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a [ 0.274423] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 56,32 bit host data width,256 deep fifo [ 0.274523] dwmmc_rockchip ffaa0000.mmc: allocated mmc-pwrseq [ 0.274539] mmc_host mmc1: card is non-removable. [ 0.275987] rv1106-acodec ff480000.acodec: current soc_id: rv1106 [ 0.276077] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_ms: 0 [ 0.277738] NET: Registered protocol family 17 [ 0.277922] Bluetooth: RFCOMM TTY layer initialized [ 0.277946] Bluetooth: RFCOMM socket layer initialized [ 0.277979] Bluetooth: RFCOMM ver 1.11 [ 0.278033] [BT_RFKILL]: Enter rfkill_rk_init [ 0.278043] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 0.278629] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 5. [ 0.278672] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 2. [ 0.278694] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 34. [ 0.278707] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!. [ 0.278761] [BT_RFKILL]: Failed to get bt_default_wake_host gpio. [ 0.278807] rfkill_bt: probe of wireless-bluetooth failed with error -1 [ 0.278881] Key type dns_resolver registered [ 0.279809] Loading compiled-in X.509 certificates [ 0.295042] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.308528] rockchip-drm display-subsystem: bound ff990000.vop (ops 0xb0424e8c) [ 0.308606] rockchip-drm display-subsystem: bound ff000000.syscon:rgb (ops 0xb04259ec) [ 0.308871] rockchip-drm display-subsystem: failed to parse resources for logo display [ 0.310520] rockchip-vop ff990000.vop: [drm:vop_crtc_atomic_enable] Update mode to 720x720p49, type: 17 [ 0.320767] mmc1: queuing unknown CIS tuple 0x10 (5 bytes) [ 0.326008] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0) [ 0.326192] mmc1: queuing unknown CIS tuple 0x10 (5 bytes) [ 0.327274] mmc1: new SDIO card at address e9ea [ 0.331371] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 52000000Hz, actual 49500000HZ div = 0) [ 0.335078] mmc0: new high speed MMC card at address 0001 [ 0.335516] mmcblk0: mmc0:0001 TWSC 7.13 GiB [ 0.335601] mmcblk0boot0: mmc0:0001 TWSC partition 1 4.00 MiB [ 0.335677] mmcblk0boot1: mmc0:0001 TWSC partition 2 4.00 MiB [ 0.335856] mmcblk0rpmb: mmc0:0001 TWSC partition 3 4.00 MiB, chardev (247:0) [ 0.336270] mmcblk0: p1(env) p2(idblock) p3(uboot) p4(boot) p5(oem) p6(userdata) p7(rootfs) [ 0.592871] Console: switching to colour frame buffer device 90x45 [ 0.609117] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 0.609814] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0 [ 0.610306] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 0.689547] ALSA device list: [ 0.689574] #0: rv1106-acodec [ 0.699613] EXT4-fs (mmcblk0p7): INFO: recovery required on readonly filesystem [ 0.699639] EXT4-fs (mmcblk0p7): write access will be enabled during recovery [ 0.739249] EXT4-fs (mmcblk0p7): recovery complete [ 0.740906] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 0.740976] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. [ 0.741113] devtmpfs: mounted [ 0.741313] Freeing unused kernel memory: 204K [ 0.741324] Kernel memory protection not selected by kernel config. [ 0.741360] Run /sbin/init as init process [ 0.746627] process '/bin/busybox' started with executable stack [ 0.800628] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null) [ 1.017980] udevd[98]: starting version 3.2.7 [ 1.027669] udevd[98]: specified group 'input' unknown [ 1.028737] udevd[98]: specified group 'kvm' unknown [ 1.056428] udevd[99]: starting eudev-3.2.7 done resize2fs 1.46.5 (30-Dec-2021) The filesystem is already 1572864 (4k) blocks long. Nothing to do! e2fsck 1.46.5 (30-Dec-2021) userdata: recovering journal userdata: clean, 15/65536 files, 18585/262144 blocks [ 2.337444] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 2.337494] ext4 filesystem being mounted at /userdata supports timestamps until 2038 (0x7fffffff) resize2fs 1.46.5 (30-Dec-2021) The filesystem is already 262144 (1k) blocks long. Nothing to do! tune2fs 1.46.5 (30-Dec-2021) e2fsck 1.46.5 (30-Dec-2021) oem: recovering journal oem: clean, 372/32768 files, 12024/131072 blocks [ 2.528590] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) resize2fs 1.46.5 (30-Dec-2021) The filesystem is already 131072 (4k) blocks long. Nothing to do! tune2fs 1.46.5 (30-Dec-2021) Initializing random number generator... done. Starting fcgiwrap daemon: OK Starting nginx... nginx: [warn] duplicate MIME type "text/html" in /oem/usr/etc/nginx/nginx.conf:43 /dev/block/by-name/userdata on /userdata type ext4 (rw,relatime) Starting system message bus: [ 3.807762] rk_dvbm ffa70000.rkdvbm: probe start [ 3.807800] rk_dvbm ffa70000.rkdvbm: dvbm ctx ae52bfa0 [ 3.808102] rk_dvbm ffa70000.rkdvbm: probe success [ 3.822205] sc3336 4-0030: driver version: 00.01.01 [ 3.822310] sc3336 4-0030: Failed to get pwdn-gpios [ 3.822324] sc3336 4-0030: could not get default pinstate [ 3.822333] sc3336 4-0030: could not get sleep pinstate dbus[180]: Unknown username "pulse" in message bus configuration file [ 3.822354] sc3336 4-0030: supply avdd not found, using dummy regulator done [ 3.822581] sc3336 4-0030: supply dovdd not found, using dummy regulator [ 3.822646] sc3336 4-0030: supply dvdd not found, using dummy regulator [ 3.833239] sc3336 4-0030: Detected OV00cc41 sensor [ 3.844537] rockchip-pinctrl pinctrl: pin gpio3-20 already requested by 4-0030; cannot claim for 4-0031 Starting bluetoothd: [ 3.844562] rockchip-pinctrl pinctrl: pin-116 (4-0031) status -22 [ 3.844577] rockchip-pinctrl pinctrl: could not request pin 116 (gpio3-20) from group mipi-refclk-out0 on device rockchip-pinctrl [ 3.844588] mis5001 4-0031: Error applying setting, reverse things back OK [ 3.844610] mis5001: probe of 4-0031 failed with error -22 [ 3.874595] rkcifhw ffa10000.rkcif: no iommu attached, using non-iommu buffers [ 3.874620] rkcifhw ffa10000.rkcif: No reserved memory region assign to CIF [ 3.875036] rkcif rkcif-mipi-lvds: rkcif driver version: v00.02.00 [ 3.875150] rkcif rkcif-mipi-lvds: attach to cif hw node [ 3.875162] rkcif rkcif-mipi-lvds: failed to get dphy hw node Starting network: [ 3.875173] rkcif rkcif-mipi-lvds: rkcif wait line 0 [ 3.875183] rkcif rkcif-mipi-lvds: rkcif fastboot reserve bufs num 3 [ 3.875197] : terminal subdev does not exist [ 3.875207] : terminal subdev does not exist [ 3.875215] : terminal subdev does not exist [ 3.875223] : terminal subdev does not exist [ 3.875232] : get_remote_sensor: video pad[0] is null [ 3.875240] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 3.875251] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 3.875259] : get_remote_sensor: video pad[0] is null [ 3.875265] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 3.875273] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 3.875281] : get_remote_sensor: video pad[0] is null [ 3.875288] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 3.875298] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 3.875306] : get_remote_sensor: video pad[0] is null [ 3.875312] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 3.875321] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0) [ 3.888070] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified [ 3.889294] rockchip-mipi-csi2-hw ffa20000.mipi-csi2-hw: enter mipi csi2 hw probe! [ 3.889454] rockchip-mipi-csi2-hw ffa20000.mipi-csi2-hw: probe success, v4l2_dev:mipi-csi2-hw! [ 3.889583] rockchip-mipi-csi2-hw ffa30000.mipi-csi2-hw: enter mipi csi2 hw probe! [ 3.889687] rockchip-mipi-csi2-hw ffa30000.mipi-csi2-hw: probe success, v4l2_dev:mipi-csi2-hw! [ 3.890123] rockchip-mipi-csi2 mipi0-csi2: attach to csi2 hw node [ 3.890187] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized! [ 3.890203] rockchip-mipi-csi2: Async registered subdev [ 3.890216] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds! [ 3.912805] rkisp_hw ffa00000.rkisp: is_thunderboot: 0 [ 3.912833] rkisp_hw ffa00000.rkisp: Missing rockchip,grf property [ 3.912875] rkisp_hw ffa00000.rkisp: max input:0x0@0fps OK [ 3.913047] rkisp_hw ffa00000.rkisp: get sram size:253952 [ 3.913062] rkisp_hw ffa00000.rkisp: no iommu attached, using non-iommu buffers [ 3.913072] rkisp_hw ffa00000.rkisp: No reserved memory region. default cma area! [ 3.913480] rkisp rkisp-vir0: rkisp driver version: v02.05.00 Starting ntpd: [ 3.913649] rkisp rkisp-vir0: No memory-region-thunderboot specified [ 3.920987] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized! [ 3.951080] rockchip-csi2-dphy-hw ff3e8000.csi2-dphy-hw: csi2 dphy hw probe successfully! [ 3.965504] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_sc3336 4-0030:bus type 5 [ 3.965531] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully! 0 [ 4.251498] rkcif rkcif-mipi-lvds: clear unready subdev num: 1 [ 4.252853] rkcif-mipi-lvds: Async subdev notifier completed [ 4.253907] rkisp-vir0: Async subdev notifier completed [ 4.255015] rkisp rkisp-vir0: clear unready subdev num: 0 [ 4.271376] rga: rga2, irq = 40, match scheduler [ 4.272043] rga: rga2 hardware loaded successfully, hw_version:3.3.87975. [ 4.272068] rga: rga2 probe successfully [ 4.272341] rga_iommu: IOMMU binding successfully, default mapping core[0x4] [ 4.273301] rga: Module initialized. v1.3.1 [ 4.294691] mpp_vcodec: loading out-of-tree module taints kernel. [ 4.310409] mpp_vcodec: init new [ 4.310561] mpp_service mpp-srv: 424abb9b author: Yandong Lin 2024-04-29 [mpp_enc]: fix wrap enc sw timeout when resolution switch [ 4.310577] mpp_service mpp-srv: probe start [ 4.311717] mpp_rkvenc_540c ffa50000.rkvenc: probing start OK [ 4.311964] mpp_rkvenc_540c ffa50000.rkvenc: probing finish [ 4.312397] mpp_vepu_pp ffa60000.rkvenc-pp: probe device [ 4.312493] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_a_pp is not found! [ 4.312505] vepu_pp_init:526: No aclk reset resource define [ 4.312515] mpp_vepu_pp ffa60000.rkvenc-pp: shared_rst_h_pp is not found! Input rkcif-mipi-lvds Format:SBGGR10_1X10 Size:2304x1296@30fps Offset(0,0) [ 4.312522] vepu_pp_init:529: No hclk reset resource define [ 4.313753] mpp_vepu_pp ffa60000.rkvenc-pp: probing finish [ 4.314006] mpp_service mpp-srv: probe success [ 4.340565] RKNPU ff660000.npu: RKNPU: rknpu iommu device-tree entry not found!, using non-iommu mode [ 4.341763] RKNPU ff660000.npu: RKNPU: Initialized RKNPU driver: v0.9.2 for 20230825 [ 4.341876] RKNPU ff660000.npu: dev_pm_opp_set_regulators: no regulator (rknpu) found: -19 [ 4.392470] rockit_load start [ 4.408445] rockit_load end [ 4.417620] rve: rve_irq, irq = 57, match scheduler / [ 4.417831] rve: Driver loaded successfully rve[2] ver:[2021]58.1a [ 4.417850] rve: probe successfully Starting sshd: [ 4.419577] rve: Module initialized. v1.0.6 sc3336 9940 1 cmd parse result: input file name : /oem/usr/share/speaker_test.wav [ 4.746352] rk_gmac-dwmac ffa80000.ethernet eth0: PHY [stmmac-0:02] driver [RK630 PHY] (irq=POLL) output file name : (null) [ 4.746684] dwmac4: Master AXI performs any burst length loop count : 1 [ 4.746712] rk_gmac-dwmac ffa80000.ethernet eth0: No Safety Features support found channel number : 1 [ 4.746733] rk_gmac-dwmac ffa80000.ethernet eth0: PTP not supported by HW open sound rate : 8000 [ 4.747071] rk_gmac-dwmac ffa80000.ethernet eth0: configuring for phy/rmii link mode open sound channel : 2 [ 4.751016] cfg80211: Loading compiled-in X.509 certificates for regulatory database input stream rate : 8000 [ 4.757565] vsys dev open 27 input channel : 2 [ 4.764043] udevd[337]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video0': No such file or directory bit_width : 16 [ 4.765354] udevd[338]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video1': No such file or directory frame_number : 4 [ 4.768595] udevd[339]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video2': No such file or directory frame_length : 1024 [ 4.774178] udevd[342]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video3': No such file or directory sound card name : hw:0,0 [ 4.775307] udevd[343]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video4': No such file or directory device id : 0 [ 4.776456] udevd[344]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video5': No such file or directory set volume curve : 0 [ 4.778083] udevd[345]: failed to execute '/lib/udev/v4l_id' 'v4l_id /dev/video6': No such file or directory set volume : 50 [ 4.820573] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' set mute : 0 [ 4.820748] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 set track_mode : 0 [ 4.820767] cfg80211: failed to load regulatory.db get volume : 0 get mute : 0 get track_mode : 0 query stat : 0 pause and resume chn : 0 save file : 0 query save file stat : 0 clear buf : 0 get attribute : 0 clear attribute : 0 set loopback mode : 0 vqe enable : 0 adec input file name : (null) rockit log path (null), log_size = 0, can use export rt_log_path=, export rt_log_size= change log_file = (nil) RTVersion 12:08:42-048 {dump :064} --------------------------------------------------------- RTVersion 12:08:42-048 {dump :065} rockit version: git-4720dc10a Tue Apr 30 15:47:55 2024 +0800 RTVersion 12:08:42-048 {dump :066} rockit building: built- 2024-04-30 15:53:43 RTVersion 12:08:42-048 {dump :067} --------------------------------------------------------- [ 5.005141] libaes: exports duplicate symbol aes_decrypt (owned by kernel) rockit default level 4, can use export rt_log_level=x, x=0,1,2,3,4,5,6 change [ 5.005470] libaes: exports duplicate symbol aes_decrypt (owned by kernel) (null) 12:08:42-048 {read_log_level :098} text is all=4 (null) 12:08:42-048 {read_log_level :100} module is all, log_level is 4 cmpi 12:08:42-066 {main :823} start running loop count = 0 (null) 12:08:42-070 {monitor_log_level :149} #Start monitor_log_level thread, arg:(nil) OK cmpi 12:08:42-161 {test_init_mpi_ao :226} Set volume curve type: 0 cmpi 12:08:42-164 {commandThread :376} test info : mute = 0, volume = 50 cmpi 12:08:42-167 {sendDataThread :309} params->s32ChnIndex : 0 [ 5.083627] aicbsp_init /etc/init.d/S50usbdevice: line 144: can't open : no such file [ 5.083648] RELEASE_DATE:2025_0410_b99ca8b6 Debug: configfs_init [ 5.083657] aicbsp_resv_mem_init insmod: can't insert 'libaes.ko': invalid module format [ 5.120992] file system registered mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory [ 5.136941] using random self ethernet address [ 5.136966] using random host ethernet address mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/acm.gs6': No such file or directory [ 5.149777] Mass Storage Function, version: 2009/09/11 [ 5.149806] LUN: removable file: (no medium) [ 5.227257] read descriptors [ 5.227329] read strings [ 5.315218] aicbsp: aicbsp_set_subsys, subsys: AIC_WIFI, state to: 1 [ 5.315248] aicbsp: aicbsp_set_subsys, power state change to 1 dure to AIC_WIFI [ 5.315255] aicbsp: aicbsp_platform_power_on [ 5.339142] aicbsp: aicbsp_sdio_probe:1 vid:0xC8A1 did:0xC08D [ 5.339284] aicbsp: aicbsp_sdio_probe:2 vid:0xC8A1 did:0xC18D [ 5.339298] aicbsp: aicbsp_sdio_probe after replace:1 [ 5.339309] AICWFDBG(LOGINFO) aicwf_sdio_chipmatch USE AIC8800DC [ 5.339316] the device is PRODUCT_ID_AIC8800DC [ 5.339325] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 50 MHz [ 5.339332] aicbsp: aicwf_sdio_reg_init [ 5.339535] aicbsp: Set SDIO Clock 50 MHz [ 5.342726] AICWFDBG(LOGINFO) btenable = 1 [ 5.342749] AICWFDBG(LOGINFO) aicbsp: aicbsp_driver_fw_init, chip rev: 7 [ 5.342761] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fw_patch_table_8800dc_u02.bin [ 5.348736] file md5:34860725322202bfc2d80843297562ee [ 5.348836] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack head_t->len:6 base_len:4 [ 5.348846] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack memcpy_len:5 [ 5.348856] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack adid_addrinf:194b44 addr_adid:1017d8 [ 5.348863] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack id:0 addr:194000 [ 5.348871] rwnx_plat_bin_fw_upload_android [ 5.348880] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fw_adid_8800dc_u02.bin [ 5.349349] file md5:95d10e6288e4d3413c0e3508cb9d711a [ 5.350013] rwnx_plat_bin_fw_upload_android [ 5.350031] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fw_patch_8800dc_u02.bin cmpi 12:08:42-769 {sendDataThread :352} eof [ 5.351559] file md5:675951fc926375001f974d729f097164 [ 5.356417] AICWFDBG(LOGDEBUG) [0x40506004]: 0x04318000 [ 5.356628] AICWFDBG(LOGDEBUG) [0x40506004]: 0x04338000 [ 5.357928] AICWFDBG(LOGDEBUG) aicbt_ext_patch_data_load ext_patch_file_name:fw_patch_8800dc_u02_ext0.bin ext_patch_id:0 ext_patch_addr:1 [ 5.357945] rwnx_plat_bin_fw_upload_android [ 5.357954] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fw_patch_8800dc_u02_ext0.bin [ 5.362354] file md5:d783d229be5a485fdb39cc018abaf55b [ 5.376676] aicbt_patch_table_load bt btmode[1]:1 [ 5.376695] aicbt_patch_table_load bt uart_baud[1]:1500000 [ 5.376703] aicbt_patch_table_load bt uart_flowctrl[1]:1 [ 5.376710] aicbt_patch_table_load bt lpm_enable[1]:0 [ 5.376718] aicbt_patch_table_load bt tx_pwr[1]:28463 [ 5.382231] aicbsp: bt patch version: - Mar 17 2025 11:27:16 - git a6547a6 [ 5.382295] ############ aicwifi_init begin [ 5.382619] AICWFDBG(LOGINFO) chip_id=7, chip_sub_id=1!! [ 5.382782] AICWFDBG(LOGDEBUG) set_bbpll_config rd_mem_addr_cfm.memdata:c [ 5.382801] AICWFDBG(LOGINFO) set_bbpll_config Crystal not provided by CPU [ 5.383012] AICWFDBG(LOGDEBUG) [0x40500010]=6 [ 5.386530] ############ system_config_8800dc done [ 5.386543] AICWFDBG(LOGTRACE) >>> rwnx_plat_patch_load() [ 5.386548] AICWFDBG(LOGINFO) testmode=0 [ 5.386554] AICWFDBG(LOGINFO) rwnx_plat_patch_loading [ 5.386560] u02 is loaing ############### [ 5.386566] rwnx_plat_bin_fw_upload_android [ 5.386577] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fmacfw_patch_8800dc_u02.bin [ 5.392826] file md5:ec8ee791723f4bf9825a6c153a7f0a8f [ 5.400526] AICWFDBG(LOGINFO) dpd calib & write [ 5.400548] aicwf_dpd_calib_8800dc [ 5.400716] AICWFDBG(LOGERROR) misc_ram_addr=120ebc [ 5.401301] AICWFDBG(LOGTRACE) bit_mask:ad03e777,8ff693a2,7584ddd,86172087 [ 5.401313] rwnx_plat_bin_fw_upload_android [ 5.401323] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fmacfw_calib_8800dc_u02.bin [ 5.407240] file md5:061790c6181e5974a4c44c515e6d0b69 [ 5.416628] AICWFDBG(LOGINFO) Start app: 00130009, 4 [ 5.636219] ############ rwnx_plat_patch_load done [ 5.637013] AICWFDBG(LOGINFO) wifisetting_cfg_addr=11019c, ldpc_cfg_addr=120980, agc_cfg_addr=120180, txgain_cfg_addr=120000 [ 5.638969] ### Upload fmacfw_patch_tbl_8800dc_u02.bin [ 5.638989] rwnx_load_firmware :firmware path = /oem/usr/ko/aic8800dc_fw/fmacfw_patch_tbl_8800dc_u02.bin [ 5.643401] file md5:c0538d7493963b1f37938e6e87f9e304 [ 5.643418] tbl size = 1008 [ 5.643426] AICWFDBG(LOGINFO) FMACFW_PATCH_TBL_8800DC_U02_DESCRIBE_BASE = 187c00 [ 5.643687] di Mar 14 2025 12:29:38 - g09cea8d [ 5.643696] patch_tbl: 110888 181219 [ 5.643868] patch_tbl: 1108ec 184d59 [ 5.644027] patch_tbl: 110874 181279 [ 5.644186] patch_tbl: 110658 181b09 [ 5.644346] patch_tbl: 1107dc 1874dd [ 5.644498] patch_tbl: 11055c 184135 [ 5.644654] patch_tbl: 110758 187485 [ 5.644813] patch_tbl: 110620 187631 [ 5.644969] patch_tbl: 1107e0 181b99 [ 5.645134] patch_tbl: 110838 181dd5 [ 5.645339] patch_tbl: 1104f4 182045 [ 5.645497] patch_tbl: 110490 182f6d [ 5.645649] patch_tbl: 110420 1822b1 [ 5.645808] patch_tbl: 11048c 1823cd [ 5.645963] patch_tbl: 110688 182471 [ 5.646119] patch_tbl: 110738 182ead [ 5.646275] patch_tbl: 110528 1877a1 [ 5.646428] patch_tbl: 110554 182fc1 [ 5.646587] patch_tbl: 110798 183615 [ 5.646742] patch_tbl: 1106dc 183061 [ 5.648937] patch_tbl: 110584 1830fd [ 5.649129] patch_tbl: 110588 1832d5 [ 5.649302] patch_tbl: 110634 1854e1 [ 5.649467] patch_tbl: 110638 1856b9 [ 5.649632] patch_tbl: 110640 1858c1 [ 5.649791] patch_tbl: 11086c 18597d [ 5.649948] patch_tbl: 1105fc 1859d9 [ 5.650101] patch_tbl: 1105f0 18655d [ 5.650255] patch_tbl: 110860 185641 [ 5.650411] patch_tbl: 11081c 185131 [ 5.650565] patch_tbl: 1105a4 185dc1 [ 5.650779] patch_tbl: 1105c8 185e91 [ 5.650940] patch_tbl: 110810 1851e9 [ 5.651097] patch_tbl: 1108c4 183869 [ 5.651252] patch_tbl: 1108c8 183705 [ 5.651408] patch_tbl: 110628 1839e1 [ 5.651562] patch_tbl: 110750 18664d [ 5.651718] patch_tbl: 1106d8 186691 [ 5.651876] patch_tbl: 11085c 183e45 [ 5.652032] patch_tbl: 110518 186945 [ 5.652190] patch_tbl: 1105e0 181f7d [ 5.652346] patch_tbl: 1107d8 18368d [ 5.652503] patch_tbl: 1103d0 1869a5 [ 5.652656] patch_tbl: 1106c8 186f81 [ 5.652810] patch_tbl: 11056c 186f4d [ 5.652965] patch_tbl: 1106b4 185309 [ 5.653121] patch_tbl: 110510 187071 [ 5.653279] patch_tbl: 110550 18710d [ 5.653466] patch_tbl: 1104ec 1842a1 [ 5.653626] patch_tbl: 1106d4 187389 [ 5.653787] patch_tbl: 11064c 186241 [ 5.653947] patch_tbl: 110494 184675 [ 5.654109] patch_tbl: 110734 184689 [ 5.654268] patch_tbl: 11047c 1873d1 [ 5.654426] patch_tbl: 110740 18757d [ 5.654582] patch_tbl: 110880 1875e9 [ 5.654738] patch_tbl: 110054 181b09 [ 5.654897] patch_tbl: 11005c 181b09 [ 5.655057] patch_tbl: 110048 182f6d [ 5.655213] patch_tbl: 110088 185929 [ 5.655365] patch_tbl: 1100c4 185309 [ 5.655518] patch_tbl: 110ef0 185b55 [ 5.655670] patch_tbl: 110ec0 183c15 [ 5.655830] patch_tbl: 110da0 183c35 [ 5.655985] patch_tbl: 110dc0 183ded [ 5.656182] patch_tbl: 110e28 183d81 [ 5.656340] patch_tbl: 1100e0 183d2d [ 5.656500] patch_tbl: 110d88 183e29 [ 5.656659] patch_tbl: 110d90 186721 [ 5.656815] patch_tbl: 110e18 183b95 [ 5.660262] patch_tbl: 110bb4 18740d [ 5.660455] patch_tbl: 110960 1835f9 [ 5.660627] patch_tbl: 1109c0 18205d [ 5.660790] patch_tbl: 110f08 182291 [ 5.660946] patch_tbl: 110b1c 183619 [ 5.661106] patch_tbl: 110b24 183619 [ 5.661261] patch_tbl: 110b5c 182585 [ 5.661423] patch_tbl: 110b64 182585 [ 5.661645] patch_tbl: 110b6c 182585 [ 5.661810] patch_tbl: 110b74 182585 [ 5.661970] patch_tbl: 110b7c 182585 [ 5.662129] patch_tbl: 110b8c 182585 [ 5.662289] patch_tbl: 110b44 1858c1 [ 5.662449] patch_tbl: 110ac0 184311 [ 5.662610] patch_tbl: 110aa0 183575 [ 5.662769] patch_tbl: 110aa8 1835dd [ 5.662925] patch_tbl: 110a60 186ea1 [ 5.663082] patch_tbl: 110e20 186f15 [ 5.663238] patch_tbl: 110f3c 187259 [ 5.663395] patch_tbl: 110d28 1872ad cmpi 12:08:43-378 {main :828} end running loop count = 0 [ 5.663556] patch_tbl: 111418 1871a1 [ 5.663712] patch_tbl: 40030084 187c80 [ 5.663865] patch_tbl: 40030000 46e68 [ 5.664023] patch_tbl: 40030004 2778c [ 5.664178] patch_tbl: 40030008 40908 [ 5.664336] patch_tbl: 4003000c 13824 [ 5.664493] patch_tbl: 40030010 13864 [ 5.664649] patch_tbl: 40030014 13868 [ 5.664803] patch_tbl: 40030018 138e4 [ 5.664965] patch_tbl: 4003001c 138e8 [ 5.665122] patch_tbl: 187c80 d0332b00 [ 5.665277] patch_tbl: 187c84 47706008 [ 5.665436] patch_tbl: 187c88 47702001 [ 5.665595] patch_tbl: 187c8c bf00bf00 [ 5.665751] patch_tbl: 187c90 bf004832 [ 5.665906] patch_tbl: 187c94 f3efbf00 [ 5.666062] patch_tbl: 187c98 bf004812 [ 5.666218] patch_tbl: 187c9c 4620bf00 [ 5.666372] patch_tbl: 40030080 fb [ 5.666530] patch_tbl: 4010001c 0 [ 5.666699] ############ aicwf_patch_config_8800dc done [ 5.666710] AICWFDBG(LOGINFO) Read FW mem: 00120000 [ 5.669710] AICWFDBG(LOGINFO) cfm: [00120000] = 00ffd780 [ 5.669727] AICWFDBG(LOGINFO) Start app: 00120000, 5 [ 5.674027] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 50 MHz [ 5.674044] aicsdio: aicwf_sdio_reg_init [ 5.684763] aicbsp: aicbsp_resv_mem_alloc_skb, alloc resv_mem_txdata succuss, id: 0, size: 98304 [ 5.685050] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 50 MHz [ 5.685216] tcp_ack_init [ 5.685234] AICWFDBG(LOGINFO) aicwf_prealloc_txq_alloc size is diff will to be kzalloc [ 5.685259] AICWFDBG(LOGINFO) aicwf_prealloc_txq_alloc txq kzalloc successful sh: write error: No such device [ 5.706836] aicbsp: sdio_err:<aicwf_sdio_bus_pwrctl,1449>: bus down [ 5.917470] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1 [ 5.919587] ieee80211 phy0: [ 5.919587] ******************************************************* [ 5.919587] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES ** [ 5.919587] ******************************************************* [ 5.930360] get_txpwr_max:txpwr_max:20 [ 6.073188] vsys_release, 27 [ 6.073204] vrgn_release, 123 [ 6.073234] vi_release 99 ifconfig: SIOCSIFADDR: No such device ifconfig: SIOCGIFFLAGS: No such device RKSockServer 12:08:44-087 {start :162} accept failed [ 6.073286] venc_release 51 [ 6.807700] rk_gmac-dwmac ffa80000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6.970661] of_dma_request_slave_channel: dma-names property of node '/serial@ff4b0000' missing or empty Device setup complete [ 6.970697] dw-apb-uart ff4b0000.serial: failed to request DMA, use interrupt mode /usr/bin/luckfox-config: line 234: warning: command substitution: ignored null byte in input (null) 12:08:45-073 {monitor_log_level :190} monitor_log_level quit Complete configuration loading Found ADC keys device: /dev/input/event0 /root/main.py and /root/boot.py not exist ,pass... OK RTC does not require time calibration [root@luckfox ]# ========================================= === This system is the factory default system, intended for testing purposes only. === === For detailed instructions, visit https://wiki.luckfox.com/. === ========================================= |
'embeded > luckfox' 카테고리의 다른 글
| luckfox csi 카메라 테스트 (0) | 2026.04.23 |
|---|
