'NMAP'에 해당되는 글 3건

  1. 2011.12.31 eth 1394에서의 nmap 실행 실패
  2. 2010.10.11 nmap 도움말 (2)
  3. 2010.10.01 nmap for windows(zenmap)
프로그램 사용/nmap2011. 12. 31. 20:21
ifconfig를 통해서 보면 Link encapsulation이 Ethernet이 아닌 UNSPEC이기 때문에
nmap 이 실행되지 않는다. 머.. 이런 저런 이유가 있군 -_-

$ nmap

Starting Nmap 5.00 ( http://nmap.org ) at 2011-12-31 20:04 KST
Note: Host seems down. If it is really up, but blocking our ping probes, try -PN
Nmap done: 1 IP address (0 hosts up) scanned in 3.25 seconds
minimonk@devbuntu:~$ sudo nmap
[sudo] password for minimonk: 

Starting Nmap 5.00 ( http://nmap.org ) at 2011-12-31 20:04 KST
Error compiling our pcap filter: ethernet addresses supported only on ethernet/FDDI/token ring/802.11/ATM LANE/Fibre Channel

$ ifconfig
eth1      Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          inet6 addr: 0::0:0:0:0/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:5 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:84 (84.0 B)
          Interrupt:18 Base address:0x6000 Memory:bc008000-bc008fff 

eth2      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:  Bcast:  Mask:
          RX packets:14348 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13061 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1047985 (1.0 MB)  TX bytes:1313497 (1.3 MB) 

'프로그램 사용 > nmap' 카테고리의 다른 글

nmap CVE report  (0) 2019.06.05
nmap 도움말  (2) 2010.10.11
nmap for windows(zenmap)  (0) 2010.10.01
Posted by 구차니

댓글을 달아 주세요

프로그램 사용/nmap2010. 10. 11. 12:02
가장 간단한 사용법은
nmap ip (1개의 아이피에 대해 1000개의 포트스캔)

조금 복잡한 사용법은
nmap -p 1-65535 ip (1개의 아이피에 대해 모든 포트스캔)

Nmap 5.21 ( http://nmap.org )
Usage: nmap [Scan Type(s)] [Options] {target specification}
  Can pass hostnames, IP addresses, networks, etc.
  Ex: scanme.nmap.org, microsoft.com/24,; 10.0.0-255.1-254
  -iL <inputfilename>: Input from list of hosts/networks
  -iR <num hosts>: Choose random targets
  --exclude <host1[,host2][,host3],...>: Exclude hosts/networks
  --excludefile <exclude_file>: Exclude list from file
  -sL: List Scan - simply list targets to scan
  -sP: Ping Scan - go no further than determining if host is online
  -PN: Treat all hosts as online -- skip host discovery
  -PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports
  -PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
  -PO[protocol list]: IP Protocol Ping
  -n/-R: Never do DNS resolution/Always resolve [default: sometimes]
  --dns-servers <serv1[,serv2],...>: Specify custom DNS servers
  --system-dns: Use OS's DNS resolver
  --traceroute: Trace hop path to each host
  -sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
  -sU: UDP Scan
  -sN/sF/sX: TCP Null, FIN, and Xmas scans
  --scanflags <flags>: Customize TCP scan flags
  -sI <zombie host[:probeport]>: Idle scan
  -sO: IP protocol scan
  -b <FTP relay host>: FTP bounce scan
  -p <port ranges>: Only scan specified ports
    Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080
  -F: Fast mode - Scan fewer ports than the default scan
  -r: Scan ports consecutively - don't randomize
  --top-ports <number>: Scan <number> most common ports
  --port-ratio <ratio>: Scan ports more common than <ratio>
  -sV: Probe open ports to determine service/version info
  --version-intensity <level>: Set from 0 (light) to 9 (try all probes)
  --version-light: Limit to most likely probes (intensity 2)
  --version-all: Try every single probe (intensity 9)
  --version-trace: Show detailed version scan activity (for debugging)
  -sC: equivalent to --script=default
  --script=<Lua scripts>: <Lua scripts> is a comma separated list of
           directories, script-files or script-categories
  --script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts
  --script-trace: Show all data sent and received
  --script-updatedb: Update the script database.
  -O: Enable OS detection
  --osscan-limit: Limit OS detection to promising targets
  --osscan-guess: Guess OS more aggressively
  Options which take <time> are in milliseconds, unless you append 's'
  (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).
  -T<0-5>: Set timing template (higher is faster)
  --min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes
  --min-parallelism/max-parallelism <time>: Probe parallelization
  --min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifies
      probe round trip time.
  --max-retries <tries>: Caps number of port scan probe retransmissions.
  --host-timeout <time>: Give up on target after this long
  --scan-delay/--max-scan-delay <time>: Adjust delay between probes
  --min-rate <number>: Send packets no slower than <number> per second
  --max-rate <number>: Send packets no faster than <number> per second
  -f; --mtu <val>: fragment packets (optionally w/given MTU)
  -D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys
  -S <IP_Address>: Spoof source address
  -e <iface>: Use specified interface
  -g/--source-port <portnum>: Use given port number
  --data-length <num>: Append random data to sent packets
  --ip-options <options>: Send packets with specified ip options
  --ttl <val>: Set IP time-to-live field
  --spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address
  --badsum: Send packets with a bogus TCP/UDP/SCTP checksum
  --adler32: Use deprecated Adler32 instead of CRC32C for SCTP checksums
  -oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3,
     and Grepable format, respectively, to the given filename.
  -oA <basename>: Output in the three major formats at once
  -v: Increase verbosity level (use twice or more for greater effect)
  -d[level]: Set or increase debugging level (Up to 9 is meaningful)
  --reason: Display the reason a port is in a particular state
  --open: Only show open (or possibly open) ports
  --packet-trace: Show all packets sent and received
  --iflist: Print host interfaces and routes (for debugging)
  --log-errors: Log errors/warnings to the normal-format output file
  --append-output: Append to rather than clobber specified output files
  --resume <filename>: Resume an aborted scan
  --stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML
  --webxml: Reference stylesheet from Nmap.Org for more portable XML
  --no-stylesheet: Prevent associating of XSL stylesheet w/XML output
  -6: Enable IPv6 scanning
  -A: Enables OS detection and Version detection, Script scanning and Traceroute
  --datadir <dirname>: Specify custom Nmap data file location
  --send-eth/--send-ip: Send using raw ethernet frames or IP packets
  --privileged: Assume that the user is fully privileged
  --unprivileged: Assume the user lacks raw socket privileges
  -V: Print version number
  -h: Print this help summary page.
  nmap -v -A scanme.nmap.org
  nmap -v -sP
  nmap -v -iR 10000 -PN -p 80
SEE THE MAN PAGE (http://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES

'프로그램 사용 > nmap' 카테고리의 다른 글

nmap CVE report  (0) 2019.06.05
eth 1394에서의 nmap 실행 실패  (0) 2011.12.31
nmap for windows(zenmap)  (0) 2010.10.01
Posted by 구차니

댓글을 달아 주세요

프로그램 사용/nmap2010. 10. 1. 15:25
nmap이 나 같은 귀차니즘 유저들을 위해 GUI 프로그램이 나왔다 -_-
솔찍히 지금도 쓰는방법을 모르면 쓰기 힘든건 마찬가지이긴 하지만..

아무튼 매우 깔끔하다.

[링크 : http://nmap.org/]

'프로그램 사용 > nmap' 카테고리의 다른 글

nmap CVE report  (0) 2019.06.05
eth 1394에서의 nmap 실행 실패  (0) 2011.12.31
nmap 도움말  (2) 2010.10.11
Posted by 구차니
TAG NMAP, zenmap

댓글을 달아 주세요