eth 1394에서의 nmap 실행 실패

ifconfig를 통해서 보면 Link encapsulation이 Ethernet이 아닌 UNSPEC이기 때문에
nmap 이 실행되지 않는다. 머.. 이런 저런 이유가 있군 -_-

$ nmap 192.168.10.1 Starting Nmap 5.00 ( http://nmap.org ) at 2011-12-31 20:04 KST Note: Host seems down. If it is really up, but blocking our ping probes, try -PN Nmap done: 1 IP address (0 hosts up) scanned in 3.25 seconds minimonk@devbuntu:~$ sudo nmap 192.168.10.1 [sudo] password for minimonk:  Starting Nmap 5.00 ( http://nmap.org ) at 2011-12-31 20:04 KST Error compiling our pcap filter: ethernet addresses supported only on ethernet/FDDI/token ring/802.11/ATM LANE/Fibre Channel QUITTING!  $ ifconfig eth1      Link encap:Ethernet  HWaddr 00:00:00:00:00:00           inet6 addr: 0::0:0:0:0/64 Scope:Link           UP BROADCAST MULTICAST  MTU:1500  Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:1 errors:0 dropped:5 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:0 (0.0 B)  TX bytes:84 (84.0 B)           Interrupt:18 Base address:0x6000 Memory:bc008000-bc008fff  eth2      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00             inet addr:192.168.10.2  Bcast:192.168.10.255  Mask:255.255.255.0           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:14348 errors:0 dropped:0 overruns:0 frame:0           TX packets:13061 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:1047985 (1.0 MB)  TX bytes:1313497 (1.3 MB)