################################################################################ # This file is part of OpenELEC - http://www.openelec.tv # Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv) # Inspired and partly copied from: # http://youresuchageek.blogspot.fr/2012/09/howto-raspberry-pi-openelec-on.html # # OpenELEC is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 2 of the License, or # (at your option) any later version. # # OpenELEC is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with OpenELEC. If not, see <http://www.gnu.org/licenses/>. ################################################################################ # Bootloader configuration - config.txt ################################################################################
################################################################################ # Memory (System/GPU configuration ) ################################################################################
# default GPU memory split (do not change if you do not know what you are doing) gpu_mem=128
# SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem' gpu_mem_256=112 gpu_mem_512=160 gpu_mem_1024=256
################################################################################ # Overclocking settings # WARNING: Do not change/enable if you do not know what you are doing! # The System may become unstable or you can have data corruption or # you can loose your warranty if you set wrong settings # # please read: http://elinux.org/RPi_config.txt#Overclocking_configuration ################################################################################
# Overclock mode settings. # # default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage # no overclocking : 700 | 250 | 400 | 0 # mode 'Modest' : 800 | 300 | 400 | 0 # mode 'Medium' : 900 | 333 | 450 | 2 # mode 'High' : 950 | 450 | 450 | 6 # mode 'Turbo' : 1000 | 500 | 500 | 6
# arm_freq=700 # core_freq=250 # sdram_freq=400 # over_voltage=0
# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!) force_turbo=0
# If you have any data corruption using Turbo Mode and overclocking # try with this setting uncommented # If this still fails, try to use Medium mode without "over_voltage=2" # If it ultimately keeps failing, forget about this until it gets fixed # Use a more conservative mode that will works fine in any cases: # initial_turbo=30
################################################################################ # Overscan settings ################################################################################
# Make display smaller to stop text spilling off the screen # see also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=67&t=15700 # overscan_scale=1 # disable_overscan=1
# Adapt overscan values to your needs # overscan_left=57 # overscan_right=59 # overscan_top=20 # overscan_bottom=20
################################################################################ # various settings see also: http://elinux.org/RPi_config.txt ################################################################################
# Force HDMI even if unplugged or powered off # hdmi_force_hotplug=1
# Doesn't sent initial active source message. # Avoids bringing CEC (enabled TV) out of standby and channel switch when # rebooting. hdmi_ignore_cec_init=1
################################################################################ # License keys to enable GPU hardware decoding for various codecs # to obtain keys visit the shop at http://www.raspberrypi.com ################################################################################
# decode_MPG2=0x00000000 # decode_WVC1=0x00000000 # decode_DTS=0x00000000 # decode_DDP=0x00000000
################################################################################ # End of default configuration # all values below this line were inserted from config.txt.bk (your old config) # and can be merged with the above values ################################################################################ |
