구차니의 잡동사니 모음

다이오드는 허용전류 1A이하의 것이면 상관없습니다.

EXT/USB는 전원을 어떤 것을 쓸지에 대한 선택이므로 AVR STUDIO와는 상관이 없습니다. 하시던대로 사용하시면 되겠습니다.

-------------- 답   글 --------------

-----------------------------------------------

박아론 님의 글 "paaron"

-----------------------------------------------

다이오드를 4148로 임의 교체하여 정상 동작은 확인하였습니다.

> 하지만 키트와의 연결이 안되는데

> 다이오드를 4148로 써야하는지 4004를 써야하는지 모르겠습니다.

> EXT모드를 쓸때는 AVR Studio4에서 어찌 연결하는지 알고싶습니다.

> 

> 

> -------------- 답   글 --------------

> 

> -----------------------------------------------

> 운영자 님의 글 "답글입니다."

> -----------------------------------------------

> 

> > 답글입니다.

> > 

> > 외부전원을 인가하고 스위치를 EXT로 설정해서 시도를 해 보시면 좋겠습니다.

> > 

> > 그렇게 해서 정상 동작을 하면, ISP에 있는 다이오드가 타 버린 것인데, 이런 상황은 스위치를 USB로 놓고 추가 구성한 회로에서 전류를 많이 가져가서 타버린 상황입니다.

> > 

> > 전류를 많이 소모를 하는 경우 (모터 구동 등)에는 반드시 외부전원을 사용하셔야 합니다.

[링크 : http://www.us-technology.co.kr/bbs/bbs.asp?mode=3&page=&no=1660...3] 

It is AVR910 Programmer. used with AVRProg in AVRstudio4. From i test, It does not stably, some time had problem with driver.

No. There is no mechanism for usbasp to work with Studio4. I know nothing about Studio5.

Usbasp is normally 'driven' by avrdude.exe which is a regular commandline program.

For a programmer to 'work' with Studio4 'Connect Programmer', it must appear as if it is a genuine Atmel programmer. e.g. give the correct ID and respond to the protocol.

I can only guess that a 'special_usbasp' would impersonate a AVRISP-2, parse the AVRISP-2 commands and then send the real usbasp commands. Then return any AVRISP-2 type errors. This whole procedure is fraught with problems. You might just as well buy an AVRISP-2 in the first place.

OTOH, if you use an 'external' Makefile with a Studio project, you can do anything you want.

David.

[링크 : http://www.avrfreaks.net/forum/usbasp-avr-studio-new] 

-mmcu=architecture

Note that when only using -mmcu=architecture but no -mmcu=MCU type, including the file <avr/io.h> cannot work since it cannot decide which device's definitions to select.

Architecture Macros

avr5

AVR_ARCH=5

AVR_MEGA [5]

AVR_ENHANCED [5]

AVR_HAVE_JMP_CALL [4]

AVR_HAVE_MOVW [1]

AVR_HAVE_LPMX [1]

AVR_HAVE_MUL [1]

AVR_2_BYTE_PC [2]

avr51

AVR_ARCH=51

AVR_MEGA [5]

AVR_ENHANCED [5]

AVR_HAVE_JMP_CALL [4]

AVR_HAVE_MOVW [1]

AVR_HAVE_LPMX [1]

AVR_HAVE_MUL [1]

AVR_HAVE_RAMPZ [4]

AVR_HAVE_ELPM [4]

AVR_HAVE_ELPMX [4]

AVR_2_BYTE_PC [2]

-mmcu=MCU type

The following MCU types are currently understood by avr-gcc. The table matches them against the corresponding avr-gcc architecture name, and shows the preprocessor symbol declared by the -mmcu option. 

Architecture MCU name    Macro

avr5/avr51 [3] atmega128   __AVR_ATmega128__

#define AVR 1

#define __AVR 1

#define __AVR_ARCH__ 5

#define __AVR_ATmega128__ 1

#define __AVR_ENHANCED__ 1

#define __AVR_MEGA__ 1

#define __AVR__ 1

#define __CHAR_BIT__ 8

#define __DBL_DENORM_MIN__ 1.40129846e-45

#define __DBL_DIG__ 6

#define __DBL_EPSILON__ 1.19209290e-7

#define __DBL_HAS_INFINITY__ 1

#define __DBL_HAS_QUIET_NAN__ 1

#define __DBL_MANT_DIG__ 24

#define __DBL_MAX_10_EXP__ 38

#define __DBL_MAX_EXP__ 128

#define __DBL_MAX__ 3.40282347e+38

#define __DBL_MIN_10_EXP__ (-37)

#define __DBL_MIN_EXP__ (-125)

#define __DBL_MIN__ 1.17549435e-38

#define __DECIMAL_DIG__ 9

#define __FINITE_MATH_ONLY__ 0

#define __FLT_DENORM_MIN__ 1.40129846e-45F

#define __FLT_DIG__ 6

#define __FLT_EPSILON__ 1.19209290e-7F

#define __FLT_EVAL_METHOD__ 0

#define __FLT_HAS_INFINITY__ 1

#define __FLT_HAS_QUIET_NAN__ 1

#define __FLT_MANT_DIG__ 24

#define __FLT_MAX_10_EXP__ 38

#define __FLT_MAX_EXP__ 128

#define __FLT_MAX__ 3.40282347e+38F

#define __FLT_MIN_10_EXP__ (-37)

#define __FLT_MIN_EXP__ (-125)

#define __FLT_MIN__ 1.17549435e-38F

#define __FLT_RADIX__ 2

#define __GNUC_MINOR__ 1

#define __GNUC_PATCHLEVEL__ 0

#define __GNUC__ 4

#define __GXX_ABI_VERSION 1002

#define __INTMAX_MAX__ 9223372036854775807LL

#define __INTMAX_TYPE__ long long int

#define __INT_MAX__ 32767

#define __LDBL_DENORM_MIN__ 1.40129846e-45L

#define __LDBL_DIG__ 6

#define __LDBL_EPSILON__ 1.19209290e-7L

#define __LDBL_HAS_INFINITY__ 1

#define __LDBL_HAS_QUIET_NAN__ 1

#define __LDBL_MANT_DIG__ 24

#define __LDBL_MAX_10_EXP__ 38

#define __LDBL_MAX_EXP__ 128

#define __LDBL_MAX__ 3.40282347e+38L

#define __LDBL_MIN_10_EXP__ (-37)

#define __LDBL_MIN_EXP__ (-125)

#define __LDBL_MIN__ 1.17549435e-38L

#define __LONG_LONG_MAX__ 9223372036854775807LL

#define __LONG_MAX__ 2147483647L

#define __NO_INLINE__ 1

#define __PTRDIFF_TYPE__ int

#define __REGISTER_PREFIX__ 

#define __SCHAR_MAX__ 127

#define __SHRT_MAX__ 32767

#define __SIZE_TYPE__ unsigned int

#define __STDC_HOSTED__ 1

#define __STDC__ 1

#define __UINTMAX_TYPE__ long long unsigned int

#define __USER_LABEL_PREFIX__ 

#define __USING_SJLJ_EXCEPTIONS__ 1

#define __VERSION__ "4.1.0"

#define __WCHAR_MAX__ 32767

#define __WCHAR_TYPE__ int

#define __WINT_TYPE__ unsigned int 

$ sudo apt-get install gcc-avr avr-libc avrdude 

pi@raspberrypi ~ $ avr-

avr-addr2line   avr-c++filt     avr-gcc-4.7.2   avr-gcov        avr-nm          avr-readelf

avr-ar          avr-cpp         avr-gcc-ar      avr-gprof       avr-objcopy     avr-size

avr-as          avr-g++         avr-gcc-nm      avr-ld          avr-objdump     avr-strings

avr-c++         avr-gcc         avr-gcc-ranlib  avr-man         avr-ranlib      avr-strip 

ATmega1284P.h

AvrBlinkenLed.cpp

IOPort.h

IOPort.cpp

Led.h

Led.cpp 

$ avr-c++ -mmcu=atmega128 IOPort.cpp

pi@raspberrypi ~/src/avr $ sudo find / -name io.h

/usr/lib/avr/include/avr/io.h