'2021/02/03'에 해당되는 글 1건

  1. 2021.02.03 STM32CubeIDE / HAL register callbacks
embeded/Cortex-M3 STM2021. 2. 3. 16:06

STM32CubeIDE의 경우 ioc 파일을 수정하면 코드를 재성성하는데

소스내의 헤더들도 당연히(?) 재생성 되니 계속 원복 되어서 분노 폭발(!)

 

열심히 뒤적여 보니 uart callback 관련해서는

stm32f1xx_hal_conf.h 의 아래 부분 설정은

/* ########################### System Configuration ######################### */
/**
  * @brief This is the HAL system configuration section
  */
#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
#define  TICK_INT_PRIORITY            0U    /*!< tick interrupt priority (lowest by default)  */
#define  USE_RTOS                     0U
#define  PREFETCH_ENABLE              1U

#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
#define  USE_HAL_UART_REGISTER_CALLBACKS        1U /* UART register callback enabled      */
#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */

 

STM32CubeIDE의 ioc / Project Manager - Advanced Settings - Register Callbacks

(오른쪽 구석탱이...)을 Enable로 바꾸어 주면 된다.

 

연관이 있는 링크인진 모르겠음 ㅋㅋ

[링크 : https://www.st.com/.../dm00154093-description-of-stm32f1-hal-and-lowlayer-drivers-stmicroelectronics.pdf]

 

 

+

나도 어느걸 보다가 저걸 발견했는진 모르겠다 -_-

소스 뒤적여서 추적하다가 발견한건가..

 

[링크 : https://mul-ku.tistory.com/entry/STM32-UART-수신-인터럽트-사용법-및-간단한-예제HAL-DRIVER]

[링크 : https://community.st.com/s/question/0D53W000000bRmkSAE/stm32-uart-call-back-function]

[링크 : https://dkeemin.com/stm32f0-uart-수신-인터럽트-코드-작성하기/]

'embeded > Cortex-M3 STM' 카테고리의 다른 글

stm32 uart echo  (0) 2021.02.04
STM32CubeIDE / HAL register callbacks  (0) 2021.02.03
STM32CubeIDE 주의사항(?)  (0) 2021.02.02
STM32F103 관련 용어  (0) 2021.02.02
CMSIS for stm32  (0) 2018.02.12
stm32 DMA 관련글들  (0) 2017.12.11
Posted by 구차니

댓글을 달아 주세요