으흐흐 키워드를 바꾸니 조금 맞는게 나오는듯
결론은.. fb1으로 그냥 써! 인가 -_-?
$ sudo mv /usr/share/X11/xorg.conf.d/99-fbturbo.conf ~ $ sudo nano /usr/share/X11/xorg.conf.d/99-pitft.conf Section "Device" Identifier "Adafruit PiTFT" Driver "fbdev" Option "fbdev" "/dev/fb1" EndSection $ sudo raspi-config Then pick the Enable Boot to Desktop/Scratch option and choose if you want to boot to the console, desktop, or scratch environment. |
/etc/X11/xorg.conf.d/99-calibration.conf Option "EmulateThirdButton" "1" Option "EmulateThirdButtonTimeout" "750" Option "EmulateThirdButtonMoveThreshold" "30" So for example your file will look like: Section "InputClass" Identifier "calibration" MatchProduct "stmpe-ts" Option "Calibration" "3800 120 200 3900" Option "SwapAxes" "1" Option "EmulateThirdButton" "1" Option "EmulateThirdButtonTimeout" "750" Option "EmulateThirdButtonMoveThreshold" "30" EndSection |
동일 제품인지 모르겠으나.. 아무튼 클럭도 줄수있긴 한데
SPI 클럭 디바이더의 설정으로 인해 아래의 클럭만 설정이 가능하다고 한다.
dtoverlay=pitft28r,rotate=90,speed=62000000,fps=25 Or whatever you like for speed, rotation, and frames-per-second. BUT, here's the thing, the Pi only supports a fixed number of SPI frequencies. So tweaking the number a little won't do anything. The kernel will round the number to the closest value. You will always get frequencies that are 250MHz divided by an even number. Here's the only SPI frequencies this kernel supports 15,625,000 (a.k.a 16000000 = 16 MHz) 17,857,142 (a.k.a. 18000000 = 18 MHz) 20,833,333 (a.k.a 21000000 = 21 MHz) 25,000,000 (= 25 MHz) 31,250,000 (a.k.a 32000000 = 32MHz) 41,666,666 (a.k.a 42000000 = 42MHz) 62,500,000 (a.k.a 62000000 = 62MHz) |
waveshare에서도 적용해보니
창 옮길때는 모르겠으나..
아주 미미하게 메뉴가 나타나는 속도 정도는 조금 빠른 느낌?
[링크 : https://learn.adafruit.com/.../extras#boot-to-x-windows-on-pitft]
[링크 : https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/faq]
[링크 : http://raspberrypi.stackexchange.com/questions/14893/force-output-to-different-display-pitft]
'embeded > raspberry pi' 카테고리의 다른 글
ubuntu mate on rpi2 (0) | 2015.08.12 |
---|---|
openelec lirc.conf 설정 (11) | 2015.08.11 |
라즈베리 파이 HDMI/composite 끄는법? (0) | 2015.08.10 |
라즈베리 파이 timezone 변경 (0) | 2015.08.09 |
MMAL - Multi-Media Abstraction Layer (0) | 2015.08.09 |