menuet OS 설정

마우스 축 뒤집히는 것만 손보면..

umid mbook m1 에서 쾌적하게 쓸수 있지 않으려나?

그리고.. 절대좌표가 문제네 끄응.....

설정 파일은.. config.mnt?

To run games (Quake,Doom,3Dmaze,..) at full speed, it's enough to define mtrr_default in config.mnt.

[링크 : http://www.menuetos.net/faq.txt]

[링크 : http://www.menuetos.net/download.htm]

37 - Get mouse data

         In : rbx - 0 Mouse coordinates, screen relative

         Out: rax - X shl 32 + Y

         In : rbx - 1 Mouse coordinates, window relative

         Out: rax - X shl 32 + Y

         In : rbx - 2 Mouse buttons state

         Out: rax - State

         In : rbx - 3 Scroll wheel change

         Out: rax - Change

[링크 : http://www.menuetos.net/syscall.txt]

+

집에와서 보니 config.mnt 는 32비트 버전에는 존재하지 않는다 -_-

config.dat

# Menuet32 kernel setup # # This file lists the video, mouse and RAM setup that the kernel will use. # Blank lines, or lines beginning with # are ignored - they are comments. # The format for each line is: [KERNEL PARAMETER] value # The allowable values for 'KERNEL PARAMETER' and corresponding 'value' are # defined below. The file may be Unix or DOS format; <cr>s are ignored. # A value of 0 => ask the user # Select the video mode to use: there are 3 basic groups. # Specify a value within the appropriate group. # Vesa 2.0+ 16 M LFB:  {1} 640x480, {2} 800x600, {3} 1024x768, {4} 1280x1024 # Vesa 1.2  16 M Bnk:  {5} 640x480, {6} 800x600, {7} 1024x768, {8} 1280x1024 # EGA/CGA   256 Cols:  {9} 320x200, {A} VGA: 16 Color 640x480. # {9} => VGA mode 0x13. {A} => VGA mode 0x12. [VIDEO] 0 # Direct LFB write, paging (available VESA 2+ only) # Use predefined settings or probe video mode. # Probing enabled {1} no, {2} yes. [PROBE] 0 # Hardware accelerated graphics # Vesa 2.0+ (only): MTRR graphics acceleration {1} yes, {2} no. [VACCEL] 0 # Mouse at: {1} PS/2 (USB), {2} Com1, {3} Com2. [MOUSE] 0 # Amount of RAM (MB) available on the system # {1} 32, {2} 64, {3} 128, {4} 256, {5} 512,{6} 1024, {7} 2048. [RAM] 0 # Cached information from floppy or hard disk (boot device) # When floppy is selected, the entire disk is copied to RAM as a RAM_Disk (/RD) # Load disk image from: {1} floppy (default), {2} hd/msetup.exe (hdboot.txt),  # {3} use preloaded ram-image from kernel restart. [RSOURCE] 0

비슷한 느낌의.. kernel.mnt는 있는데

바이너리 커널 파일인 것으로 추측된다.

+

64비트 버전에는 config.mnt가 존재한다.

# #  MenuetOS 64 configuration # config_version          = 0x000025   # For kernel. # Default screen resolution screen_resolution       = 0x000002   # 1 = 640x480  , 2 = 800x600                                      # 3 = 1024x768 , 4 = 1280x1024                                      # 5 = 1440x900 , 9 = Custom # Custom resolution must be supported by both # graphics card and display. custom_res_x            = 00000000   # Custom X resolution custom_res_y            = 00000000   # Custon Y resolution # PS/2 Mouse settings mouse_scroll_wheel      = 0x000000   # 0/1 = disabled/enabled # Window transparency # # 512MB of RAM required for resolutions up to 1280x1024. # 1GB of RAM required for HD resolutions. # Define with parameter amount_of_ram. window_transparency     = 0x000001   # 0 = Disabled                                      # 1 = Enabled for Title and Frames                                      # 2 = Enabled for Title, Menu and Frames transparency_opacity    = 0x000002   # 0 = 75:25, 1 = 50:50, 2 = 25:75 # Memory # # 128 MB required (0x080) amount_of_ram           = 0x000200   # 0x100 = 256 MB, 0x200 = 512 MB # Verify the amount for ram from Bios ram_verify              = 0x000001   # 0x000 = Disabled, 0x001 = Enabled # Verify OS memory map from Bios # # Map:0x8000-0x58000,1M-14M,16M-amount_of_ram map_verify              = 0x000001   # 0x000 = Disabled, 0x001 = Enabled # Memory acceleration # # Mtrr_default works without defining mtrr_vesa_lfb or mtrr_mask. # Some multiprocessor systems require enabling SMP at parameter smp_enable. # Unstable, if defined by BIOS at bootup. mtrr_default            = 0x000100   # 0x006 = write-back, 0x100 = disabled # Graphics acceleration # # Mtrr_mask is required for defining mtrr_vesa_lfb # Unstable, if defined by BIOS at bootup. mtrr_vesa_lfb           = 0x000100     # 0x001 = write-combine, 0x100 = disabled mtrr_mask               = 0xffffffff   # 4 Gigabytes (default), CPU dependent # Mtrr cache writeback # # If display update seems late or out of sync, enabling this feature # results to faster display updates. mtrr_wbinvd             = 0x000000     # 0x000 = disabled, 0x001 = enabled # Mtrr cache delay # # If display has residuals from mouse or other gui events, increasing  # this value results to cleaner display updates. mtrr_delay              = 00000010     # 5-1000ms, default:10ms # USB 2.0 (ehci) # # Webcam, TV/Radio, Printer, Mass storage (read/write, Fat32) # # Note: 1) USB Legacy support in BIOS must be disabled, unless #          the computer boots from USB device. See usb_legacy_disable. #       2) Sandisk flash drives and regular backups are recommended, #          since not all of the mass storage functions are supported. #       3) If motherboard has multiple ehci controllers, the first pci  #          device is activated. usb_enable              = 0x000000     # 0x000 = Disabled, 0x001 = Enabled # USB 2.0 - Disable BIOS legacy support after bootup # # If the computer boots from USB drive, enabling this feature # enables access to USB drive when Menuet is running. # Not all BIOSs support this feature. usb_legacy_disable      = 0x000000     # 0x000 = Disabled, 0x001 = Enabled # USB 2.0 - Ehci driver cache mode # # To debug cache coherency between driver and controller. # 0x000       = Normal     (non-cacheable pages) # 0x001/0x002 = Invalidate (cache writeback and invalidate,slower) #                          (0x001/0x002=all cpus/single cpu) #                          (Amd sb600 and sb700 rev 3a & 3b) usb_ehci_cache_mode     = 0x000000     # 0x000 = Normal                                        # 0x001/0x002 = Invalidate # USB 1.X (ohci/amd - uhci/intel) # # USB keyboard and mouse usb_ohci_enable         = 0x000000     # 0x000 = Disabled, 0x001 = Enabled usb_uhci_enable         = 0x000000     # 0x000 = Disabled, 0x001 = Enabled # Display window content while moving display_window          = 00000001  # 0x000 = Disabled, 0x001 = Enabled display_interval        = 00000025  # times/second # Window skin window_skin             = '/FD/1/SKIN.BMP' # Fat12 floppy fd_1_enable             = 0x000001  # 0 = disable, 1 = enable fd_1_write              = 0x000000  # 0/1 = disable/enable direct write # Fat32 partition hd_1_enable             = 0x000000  # 0x000 disabled, 0x001 enabled hd_1_base               = 0x000000  # 0x1f0 primary, 0x170 secondary hd_1_id                 = 0x000000  # 0x00 master, 0x10 slave hd_1_partition          = 0x000001  # 1 first, fixed to first now hd_1_irq                = 0x000000  # hd 1 irq, not yet implemented # CD/DVD cd_1_enable             = 0x000000  # 0x000 disabled, 0x001 enabled cd_1_base               = 0x000000  # 0x1f0 primary, 0x170 secondary cd_1_id                 = 0x000000  # 0x00 master, 0x10 slave cd_1_irq                = 0x000000  # cd 1 irq, not yet implemented # System directory system_directory        = '/FD/1/'  # System file location # Window shape window_corners          = 0x000000  # 0 = round, 1 = sharp # Network at boot network_driver          = '/FD/1/DRIVER/I8254X' # Ethernet driver network_card_enable     = 0x00000000  # 0/1 = network card disabled/enabled                                       # When enabled, requires also selecting                                        # ethernet interface at network_config network_ip              = 0x1800a8c0  # 192.168.0.24 network_gateway         = 0x0100a8c0  # 192.168.0.1 network_subnet_mask     = 0x00FFFFFF  # 255.255.255.0 network_dns             = 0x0100a8c0  # 192.168.0.1 network_config          = 0x03f80400  # Bits 16- Com port                                       # Bits 08- Com IRQ                                       # Bit  07  Server assigned                                       # Bits 00- Interface 0=disabled                                        #                    3=ethernet # Audio at boot audio_driver            = '/FD/1/DRIVER/INTELHDA' audio_card_enable       = 0x00000000  # 0/1 = audio card disabled/enabled # Midi at boot midi_driver             = '/FD/1/DRIVER/MPU401' midi_card_enable        = 0x00000000  # 0/1 = midi card disabled/enabled # Graphics graphics_driver         = '/FD/1/DRIVER/GRX' graphics_driver_enable  = 00000000   # 0/1 = no/yes graphics_boot_driver    = 00000000   # 0/1 = vesa/driver graphics_boot_x         = 00000000   # Driver boot X resolution graphics_boot_y         = 00000000   # Driver boot Y resolution graphics_boot_hz        = 00000000   # Driver boot frequency # Email email_pop_server        = 'pop.server' email_pop_user          = 'Username' email_smtp_server       = 'smtp.server' email_smtp_user         = 'Username@smtp.server' # File browser # # 00XY - X=Contents(0/1=close/open), Y=Paths(0/1=close/open) file_browser_setup      = 00000001   # Contents,Paths # Background at bootup # # bmp, png, jpg or gif # [Default] = Default Menuet background background              = '/fd/1/bgr.jpg' # Main Menu Position # # 0 = up, 1 = down main_menu_position      = 0x000001 # Multi-Processor support # # Upto 8 processors are supported. Pressing ctrl-alt-pageup # moves all processes to CPU-0 and disables SMP. smp_enable              = 0x000000   # 0x000/0x001 = disabled/enabled # MCE # # CPU is disabled at machine check exception  # (dot at top-left screen) mce_enable              = 0x000000   # 0x000/0x001 = disabled/enabled # Keyboard layout # # See app kbd-map for values (1=fin,2=eng,3=est,..) keyboard_layout         = 00000000   # 000 = Default western # System font default size system_font_size        = 0x00000A   # Values: 0x009-0x00C # Font type # # 0x000/0x001/0x002 = Upper/Capitalized/Lower icon_font               = 0x000000   # 0x000-0x002 main_menu_font          = 0x000000   # 0x000-0x002 file_browser_font       = 0x000000   # 0x000-0x002 # Configuration edit delay configuration_delay     = 0x000003   # Seconds