embeded/FPGA - ALTERA2026. 11. 17. 08:46

50Mhz 로 밖에 합성이 안되다니.. 클럭을 올릴방법이 없나? ㅠㅠ

bogomips는 그래도 1Mhz 당 1 정도 나오는것 같던데 고작 1.67 이라니.. 너무 하네

ii/f 하면 좀 나으려나?

/root # cat /proc/cpuinfo
free -h
CPU:            Nios II/e
MMU:            none
FPU:            none
Clocking:       50.00 MHz
BogoMips:       1.67
Calibration:    838400 loops
HW:
 MUL:           no
 MULX:          no
 DIV:           no
Icache:         0kB, line length: 4
Dcache:         0kB, line length: 4
/root # free -h
/root # uname -a
uClinux de0-nano 3.5.0-rc4 #20 Tue Nov 17 08:09:52 KST 2026 nios2 GNU/Linux
/root # mount
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)

 

16초에 있던 저게 먼진 모르겠는데 왜이렇게 오래 멈춰있다가 진행할까

램은 32MB 플래시 8M 였던것 같은데

[    0.000000] Linux version 3.5.0-rc4 (root@DESKTOP-F62EJAR) (gc[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyJ0,115200 loglevel=8 rdinit=/init
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Memory available: 29796k/2644k RAM (1658k kernel code, 986k data)
[    0.000000] NR_IRQS:64
[    0.170000] Calibrating delay loop... 1.67 BogoMIPS (lpj=8384)
[    0.180000] pid_max: default: 32768 minimum: 301
[    0.260000] Mount-cache hash table entries: 512
[    0.670000] devtmpfs: initialized
[    0.850000] NET: Registered protocol family 16
[    1.290000] bio: create slab <bio-0> at 0
[    1.500000] Switching to clocksource timer
[    1.740000] NET: Registered protocol family 2
[    1.800000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.900000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    1.920000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    1.940000] TCP: Hash tables configured (established 1024 bind 1024)
[    1.950000] TCP: reno registered
[    1.950000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.960000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    2.000000] NET: Registered protocol family 1
[   16.200000] msgmni has been set to 58
[   16.240000] io scheduler noop registered (default)
[   16.290000] ttyAL0 at MMIO 0x10040 (irq = 3) is a Altera UART
[   16.330000] ttyJ0 at MMIO 0x10000 (irq = 0) is a Altera JTAG UART
[   16.340000] console [ttyJ0] enabled, bootconsole disabled
[   16.340000] console [ttyJ0] enabled, bootconsole disabled
[   16.540000] PPP generic driver version 2.4.2
[   16.580000] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[   16.650000] TCP: cubic registered
[   16.650000] NET: Registered protocol family 17
[   16.950000] Freeing unused kernel memory: 624k freed (0x219f000 - 0x223b000)

DE0-Nano root filesystem ready; login as root (no password).
init started: BusyBox v1.18.4 (2026-11-17 08:09:33 KST)
starting pid 19, tty '/dev/ttyJ0': '/sbin/getty -L ttyJ0 115200 vt100'

DE0-Nano Nios II uClinux - local development console
de0-nano login:

 

요건 테스트로 led 깜박이는 예제 올린거

fx2lp 와 아두이노용 spi 이더넷을 연결하면 ifconfig 와 ssh 정도 가능하려나?

 

+

2026.11.17

50Mhz 에서 75Mhz로 올리니 1.6에서 2.6으로 상승!

그래봤자 응답이 엄청  느리다 ㅜㅠ

root # cat /proc/cpuinfo
CPU:            Nios II/e
MMU:            none
FPU:            none
Clocking:       75.00 MHz
BogoMips:       2.63
Calibration:    1318400 loops
HW:
 MUL:           no
 MULX:          no
 DIV:           no
Icache:         0kB, line length: 4
Dcache:         0kB, line length: 4

 

top 했다고 cpu 98% 찍는 위엄 ㅋㅋ

Mem: 3468K used, 26952K free, 0K shrd, 0K buff, 1028K cached
CPU:  17% usr  82% sys   0% nic   0% idle   0% io   0% irq   0% sirq
Load average: 0.32 0.21 0.14 1/17 48
  PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
   48    19 root     R      580   2%  98% top
   15     2 root     SW       0   0%   2% [kworker/0:1]
   19     1 root     S      596   2%   0% -sh
    1     0 root     S      592   2%   0% init
    8     2 root     SW       0   0%   0% [sync_supers]
    7     2 root     SW       0   0%   0% [kdevtmpfs]
    5     2 root     SW       0   0%   0% [kworker/u:0]
    2     0 root     SW       0   0%   0% [kthreadd]
    3     2 root     SW       0   0%   0% [ksoftirqd/0]
    9     2 root     SW       0   0%   0% [bdi-default]
   14     2 root     SW       0   0%   0% [kworker/u:1]
    4     2 root     SW       0   0%   0% [kworker/0:0]
    6     2 root     SW<      0   0%   0% [khelper]
   10     2 root     SW<      0   0%   0% [kblockd]
   11     2 root     SW       0   0%   0% [kswapd0]
   12     2 root     SW       0   0%   0% [fsnotify_mark]
   13     2 root     SW<      0   0%   0% [deferwq]

 

100Mhz 시도 성공 1.6 -> 3.55 딱 두배 오르긴 했는데 여전히 느리네

# cat /proc/cpuinfo
CPU:            Nios II/e
MMU:            none
FPU:            none
Clocking:       100.00 MHz
BogoMips:       3.55
Calibration:    1779200 loops
HW:
 MUL:           no
 MULX:          no
 DIV:           no
Icache:         0kB, line length: 4
Dcache:         0kB, line length: 4

'embeded > FPGA - ALTERA' 카테고리의 다른 글

nios ii/e uclinux boot on epcs  (0) 2026.11.17
de0-nano 와 codex로 flash 통합하기  (0) 2026.11.16
epcs controller / as?  (0) 2026.11.16
quartus_sh  (0) 2026.10.31
tcl, tk, tcl/tk  (0) 2026.10.31
Posted by 구차니