하드웨어/RAID2011. 12. 11. 17:09
기록용 -ㅁ-

$ lspci | grep 3ware
02:03.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID

$ dmesg | grep 3ware
[    1.092263] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[    2.193767] scsi2 : 3ware 9000 Storage Controller
[    2.193932] 3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xfcdffc00, IRQ: 24.

$ lsmod | grep 3w
3w_9xxx                35257  0

$ modinfo 3w_9xxx
filename:       /lib/modules/2.6.32-33-server/kernel/drivers/scsi/3w-9xxx.ko
version:        2.26.02.012
license:        GPL
description:    3ware 9000 Storage Controller Linux Driver
author:         AMCC
srcversion:     9448455BB935CC3049B6CC3
alias:          pci:v000013C1d00001005sv*sd*bc*sc*i*
alias:          pci:v000013C1d00001004sv*sd*bc*sc*i*
alias:          pci:v000013C1d00001003sv*sd*bc*sc*i*
alias:          pci:v000013C1d00001002sv*sd*bc*sc*i*
depends:
vermagic:       2.6.32-33-server SMP mod_unload modversions
parm:           use_msi:Use Message Signaled Interrupts.  Default: 0 (int) 


리눅스에서 tw_cli를 이용해서 펌웨어 확인
# ./tw_cli
//ubuntu64srv> ?

Copyright(c) 2004, 2005 Applied Micro Circuits Corporation(AMCC). All rights reserved.

AMCC/3ware CLI (version 2.00.03.017)


Commands  Description
-------------------------------------------------------------------
info      Displays information about controller(s), unit(s) and port(s).
maint     Performs maintenance operations on controller(s), unit(s) and ports.
alarms    Displays current AENs.
set       Displays or modifies controller and unit settings.
sched     Schedules bachground tasks on controller(s)             (9000 series)
quit      Exits the CLI.
           ---- New Command Syntax ----
focus     Changes from one object to another.  For Interactive Mode Only!
show      Displays information about controller(s), unit(s) and port(s).
flush     Flush write cache data to units in the system.
rescan    Rescan all empty ports for new unit(s) and disk(s).
commit    Commit dirty DCB to storage on controller(s).        (Windows only)
/cx       Controller specific commands.
/cx/ux    Unit specific commands.
/cx/px    Port specific commands.
/cx/bbu   BBU specific commands.                                  (9000 only)

Type help <command> to get more details about a particular command.
For more detail information see tw_cli's documentation.

//ubuntu64srv> info

Ctl   Model        Ports   Drives   Units   NotOpt   RRate   VRate   BBU
------------------------------------------------------------------------
c2    9500S-4LP    4       4        1       1        5       5       -

//ubuntu64srv> info c2 firmware
/c2 Firmware Version = FE9X 2.08.00.009

//ubuntu64srv> q 
 
Posted by 구차니