saned 서버 설정하기

초기 설정에는 전부 주석이 되어있을뿐 어떠한 내용도 들어있지 않다.
그런 이유로 sane을 사용하려면 아래의 두줄을 설정해야 한다.

# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 - 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # #data_portrange = 10000 - 10100 data_portrange = 6656 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. #scan-client.somedomain.firm #192.168.0.1 #192.168.0.1/29 #[2001:7a8:185e::42:12] #[2001:7a8:185e::42:12]/64 192.168.10.10/24 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).

그리고 나서  sane을 구동하려면
/etc/default/saned 에서 RUN=no를 TUN=yes로 바꾸어 준다.

# Defaults for the saned initscript, from sane-utils # Set to yes to start saned RUN=yes # Set to the user saned should run as RUN_AS_USER=saned

위의 설정은 부팅시 자동시작뿐만 아니라 수동으로 시작을 할지 안할지를 설정하는 부분이다.