udhcpd 용 interface 예제

udhcp는 dhcp client 겸, network setting tool이다.
아무튼 busybox에서 채택하고 있는 dhcp client 이며, 나름 쓸만한 녀석이다.

###################################################################### # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # # A "#" character in the very first column makes the rest of the line # be ignored. Blank lines are ignored. Lines may be indented freely. # A "\" character at the very end of the line indicates the next line # should be treated as a continuation of the current one. # # The "pre-up", "up", "down" and "post-down" options are valid for all # interfaces, and may be specified multiple times. All other options # may only be specified once. # # See the interfaces(5) manpage for information on what options are # available. ###################################################################### # We always want the loopback interface. # # auto lo # iface lo inet loopback # An example ethernet card setup: (broadcast and gateway are optional) # # auto eth0 # iface eth0 inet static #     address 192.168.0.42 #     network 192.168.0.0 #     netmask 255.255.255.0 #     broadcast 192.168.0.255 #     gateway 192.168.0.1 # A more complicated ethernet setup, with a less common netmask, and a downright # weird broadcast address: (the "up" lines are executed verbatim when the # interface is brought up, the "down" lines when it's brought down) # # auto eth0 # iface eth0 inet static #     address 192.168.1.42 #     network 192.168.1.0 #     netmask 255.255.255.128 #     broadcast 192.168.1.0 #     up route add -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.2 #     up route add default gw 192.168.1.200 #     down route del default gw 192.168.1.200 #     down route del -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.2 # A more complicated ethernet setup with a single ethernet card with # two interfaces. # Note: This happens to work since ifconfig handles it that way, not because # ifup/down handles the ':' any differently. # Warning: There is a known bug if you do this, since the state will not # be properly defined if you try to 'ifdown eth0' when both interfaces # are up. The ifconfig program will not remove eth0 but it will be # removed from the interfaces state so you will see it up until you execute: # 'ifdown eth0:1 ; ifup eth0; ifdown eth0' # BTW, this is "bug" #193679 (it's not really a bug, it's more of a # limitation) # # auto eth0 eth0:1 # iface eth0 inet static #     address 192.168.0.100 #     network 192.168.0.0 #     netmask 255.255.255.0 #     broadcast 192.168.0.255 #     gateway 192.168.0.1 # iface eth0:1 inet static #     address 192.168.0.200 #     network 192.168.0.0 #     netmask 255.255.255.0 # "pre-up" and "post-down" commands are also available. In addition, the # exit status of these commands are checked, and if any fail, configuration # (or deconfiguration) is aborted. So: # # auto eth0 # iface eth0 inet dhcp #     pre-up [ -f /etc/network/local-network-ok ] # # will allow you to only have eth0 brought up when the file # /etc/network/local-network-ok exists. # Two ethernet interfaces, one connected to a trusted LAN, the other to # the untrusted Internet. If their MAC addresses get swapped (because an # updated kernel uses a different order when probing for network cards, # say), then they don't get brought up at all. # # auto eth0 eth1 # iface eth0 inet static #     address 192.168.42.1 #     netmask 255.255.255.0 #     pre-up /path/to/check-mac-address.sh eth0 11:22:33:44:55:66 #     pre-up /usr/local/sbin/enable-masq # iface eth1 inet dhcp #     pre-up /path/to/check-mac-address.sh eth1 AA:BB:CC:DD:EE:FF #     pre-up /usr/local/sbin/firewall # Two ethernet interfaces, one connected to a trusted LAN, the other to # the untrusted Internet, identified by MAC address rather than interface # name: # # auto eth0 eth1 # mapping eth0 eth1 #     script /path/to/get-mac-address.sh #     map 11:22:33:44:55:66 lan #     map AA:BB:CC:DD:EE:FF internet # iface lan inet static #     address 192.168.42.1 #     netmask 255.255.255.0 #     pre-up /usr/local/sbin/enable-masq $IFACE # iface internet inet dhcp #     pre-up /usr/local/sbin/firewall $IFACE # A PCMCIA interface for a laptop that is used in different locations: # (note the lack of an "auto" line for any of these) # # mapping eth0 #    script /path/to/pcmcia-compat.sh #    map home,*,*,*                  home #    map work,*,*,00:11:22:33:44:55  work-wireless #    map work,*,*,01:12:23:34:45:50  work-static # # iface home inet dhcp # iface work-wireless bootp # iface work-static static #     address 10.15.43.23 #     netmask 255.255.255.0 #     gateway 10.15.43.1 # # Note, this won't work unless you specifically change the file # /etc/pcmcia/network to look more like: # #     if [ -r ./shared ] ; then . ./shared ; else . /etc/pcmcia/shared ; fi #     get_info $DEVICE #     case "$ACTION" in #         'start') #             /sbin/ifup $DEVICE #             ;; #         'stop') #             /sbin/ifdown $DEVICE #             ;; #     esac #     exit 0 # An alternate way of doing the same thing: (in this case identifying # where the laptop is is done by configuring the interface as various # options, and seeing if a computer that is known to be on each particular # network will respond to pings. The various numbers here need to be chosen # with a great deal of care.) # # mapping eth0 #    script /path/to/ping-places.sh #    map 192.168.42.254/24 192.168.42.1 home #    map 10.15.43.254/24 10.15.43.1 work-wireless #    map 10.15.43.23/24 10.15.43.1 work-static # # iface home inet dhcp # iface work-wireless bootp # iface work-static static #     address 10.15.43.23 #     netmask 255.255.255.0 #     gateway 10.15.43.1 # # Note that the ping-places script requires the iproute package installed, # and the same changes to /etc/pcmcia/network are required for this as for # the previous example. # Set up an interface to read all the traffic on the network. This # configuration can be useful to setup Network Intrusion Detection # sensors in 'stealth'-type configuration. This prevents the NIDS # system to be a direct target in a hostile network since they have # no IP address on the network. Notice, however, that there have been # known bugs over time in sensors part of NIDS (for example see # DSA-297 related to Snort) and remote buffer overflows might even be # triggered by network packet processing. # # auto eth0 # iface eth0 inet manual #     up ifconfig $IFACE 0.0.0.0 up #       up ip link set $IFACE promisc on #       down ip link set $IFACE promisc off #       down ifconfig $IFACE down # Set up an interface which will not be allocated an IP address by # ifupdown but will be configured through external programs. This # can be useful to setup interfaces configured through other programs, # like, for example, PPPOE scripts. # # auto eth0 # iface eth0 inet manual #       up ifconfig $IFACE 0.0.0.0 up #       up /usr/local/bin/myconfigscript #       down ifconfig $IFACE down [링크 : http://www.cyberciti.biz/faq/setting-up-an-network-interfaces-file/]

[링크 : http://www.cyberciti.biz/tips/howto-ubuntu-linux-convert-dhcp-network-configuration-to-static-ip-configuration.html]

[링크 : http://pig.cs.upt.ro/cgi-bin/man/man2html?interfaces+5]