USB 사용가능 최대거리

Cables

The maximum length of a standard USB cable (for USB 2.0 or earlier) is 5.0 metres (16.4 ft). The primary reason for this limit is the maximum allowed round-trip delay of about 1,500 ns. If USB host commands are unanswered by the USB device within the allowed time, the host considers the command lost. When adding USB device response time, delays from the maximum number of hubs added to the delays from connecting cables, the maximum acceptable delay per cable amounts to be 26 ns.^[28] The USB 2.0 specification requires cable delay to be less than 5.2 ns per meter (192,000 km/s, which is close to the maximum achievable speed for standard copper cable).^[29] This allows for a 5 meter cable. The USB 3.0 standard does not directly specify a maximum cable length, requiring only that all cables meet an electrical specification. For copper wire cabling, some calculations have suggested a maximum length of perhaps 3m. No fiber optic cable designs are known to be under development, but they would be likely to have a much longer maximum allowable length, and more complex construction.

Maximum useful distance

USB 1.1 maximum cable length is 3 metres (9.8 ft).^[30] USB 2.0 maximum cable length is 5 metres (16 ft). Maximum permitted hubs connected in series is 5. Although a single cable is limited to 5 metres, the USB 2.0 specification permits up to five USB hubs in a long chain of cables and hubs. This allows for a maximum distance of 30 metres (98 ft) between host and device, using 6 cables 5 metres (16 ft) long and five hubs. In actual use, since some USB devices have built-in cables for connecting to the hub, the maximum achievable distance is 25 metres (82 ft) + the length of the device's cable. For longer lengths, USB extenders that use CAT5 cable can increase the distance between USB devices up to 50 metres (160 ft).

[링크 : http://en.wikipedia.org/wiki/Universal_Serial_Bus]

결론만 말하자면 허브로 연장해도 30m, 연장하지 않고 단일로 사용하면 5m가 한계이다.
요즘에 USB 1.1 장비는 많이 사용하지 않으니까 무난하게 사용하려면 3m가 한계라고 보면된다.