하드웨어2010. 2. 9. 16:48
resistive [rizístiv] a.
저항하는, 저항력 있는, 저항성의; 〖전기〗 저항의.

capacitive [kəpǽsətiv] a.
〖전기〗 전기 용량의, 용량성의.

용어대로라면, 감압식이라기 보다는 저항식 터치가 되어야 하지 않을까 생각이 되지만,
아무튼, 감압식은 두장의 패널로 좌표를 측정하는 방식이다.
누르면 저항이 변경되고 이 값을  4개의 핀으로 보내 ADC를 통해 좌표를 추출한다.(일종의 위치에 따른 가변저항?)


그에 반해, 정전식은
전기가 통할수있는(그렇다고 몇백 볼트는 아니겠지만) 유리같은 녀석에 신체와 같이 전하를 띄는 물체가
접촉하거나 근접하면 접촉면 내의 전하가 이동하여 생기는 변화를 측정하여 좌표를 측정한다.

정전식에는 두가지가 있는데
미세한 matrix 를 행/열 단위로 조사하여 접촉 지점을 특정하는 방법과,
절대 정전값을 통해 위치를 특정하는 방법이 있다고 한다.


행/열 스캔 < >그리드 스캔

아래의 링크를 보면 정전식의 두가지 구조를 볼수 있다.
[링크 : http://electronics.howstuffworks.com/iphone2.htm] << 그림만 봐도 머리에 쏙쏙!

Capacitive sensors can be constructed from many different media, such as copper, Indium tin oxide (ITO) and printed ink. Copper capacitive sensors can be implemented on standard FR4 PCBs as well as on flexible material. ITO allows the capacitive sensor to be up to 90% transparent (for single layer solutions). The size and spacing of the capacitive sensor are both very important to the sensor's performance. In addition to the size of the sensor, and its spacing relative to the ground plane, the type of ground plane used is very important. Since the parasitic capacitance of the sensor is related to the E-Field's path to ground, it is important to choose a ground plane that limits the concentration of E-Field lines without a conductive object present.


Designing a capacitance sensing system requires first picking the type of sensing material (FR4, Flex, ITO, etc). One also needs to understand the environment the device will operate in, such as the full operating temperature range, what radio frequencies are present and how the user will interact with the interface.


There are two types of capacitive sensing system. Transcapacitance, where the object (finger, conductive stylus) alters the transcapacitance coupling between row and column electrodes, which are scanned sequentially.[3] The second is Absolute Capacitance where the object (finger, etc.) senses the presence and absolute position horizontally and vertically on the surface. Subtraction of a preceding absolute position from the present absolute position yields the relative motion of the object/finger during that time.


[링크 : http://en.wikipedia.org/wiki/Capacitive_sensing]


구조적으로만 따지면, 감압식도 멀티터치가 불가능해 보이진 않지만 음.. 돈이 문제일려나?
아무튼 단순하게 값으로 받아내기에는 감압식이 간단하며
정전식은 별도의 처리과정을 통해(일종의 이미지 프로세싱/그룹핑) 터치/멀티 터치를 구현한다.

그리고 정전식은 전하를 지닌 물건이 아니면(노골적으로 말하자면 손!) 터치가 되지 않으며
온도나 습도 그리고 전하용량에 많은 영향을 받는다.
직접 아이폰을 사용해보진 않았지만, 극단적으로 장시간 무중력 상태에서 사용하면 터치가 안될지도 모르겠다?!
(인간의 몸의 정전용량은 한계가 있고, ground 처리로 바닥을 통해 빠져나가서 전하용량의 차이로 터치가 되는건데
다른 물체와 접촉하지 않은 상태에서의 인간의 전하용량이 언젠가는 터치패드와 동일해질수 있을것이고
그러면 결국에는 터치가 인식되지 않을 가능성이 있어 보인다.)

[링크 : http://ko.wikipedia.org/wiki/정전식_터치스크린]
[링크 : http://ko.wikipedia.org/wiki/감압식_터치스크린]
[링크 : http://en.wikipedia.org/wiki/Resistive_touchscreen]
[링크 : http://en.wikipedia.org/wiki/Capacitive_sensing]
Posted by 구차니