구차니의 잡동사니 모음

Timing Name = 640 x 480 @ 60Hz;

Hor Pixels = 640; // Pixels

Ver Pixels = 480; // Lines

Hor Frequency = 31.469; // kHz = 31.8 usec / line

Ver Frequency = 59.940; // Hz = 16.7 msec / frame

Pixel Clock = 25.175; // MHz = 39.7 nsec ± 0.5%

Character Width = 8; // Pixels = 317.8 nsec

Scan Type = NONINTERLACED; // H Phase = 2.0 %

Hor Sync Polarity = NEGATIVE; // HBlank = 18.0% of HTotal

Ver Sync Polarity = NEGATIVE; // VBlank = 5.5% of VTotal

Hor Total Time = 31.778; // (usec) = 100 chars = 800 Pixels

Hor Addr Time = 25.422; // (usec) = 80 chars = 640 Pixels

Hor Blank Start = 25.740; // (usec) = 81 chars = 648 Pixels

Hor Blank Time = 5.720; // (usec) = 18 chars = 144 Pixels

Hor Sync Start = 26.058; // (usec) = 82 chars = 656 Pixels

// H Right Border = 0.318; // (usec) = 1 chars = 8 Pixels

// H Front Porch = 0.318; // (usec) = 1 chars = 8 Pixels

Hor Sync Time = 3.813; // (usec) = 12 chars = 96 Pixels

// H Back Porch = 1.589; // (usec) = 5 chars = 40 Pixels

// H Left Border = 0.318; // (usec) = 1 chars = 8 Pixels

Ver Total Time = 16.683; // (msec) = 525 lines HT – (1.06xHA)

Ver Addr Time = 15.253; // (msec) = 480 lines = 4.83

Ver Blank Start = 15.507; // (msec) = 488 lines

Ver Blank Time = 0.922; // (msec) = 29 lines

Ver Sync Start = 15.571; // (msec) = 490 lines

// V Bottom Border = 0.254; // (msec) = 8 lines

// V Front Porch = 0.064; // (msec) = 2 lines

Ver Sync Time = 0.064; // (msec) = 2 lines

// V Back Porch = 0.794; // (msec) = 25 lines

// V Top Border = 0.254; // (msec) = 8 lines

 Timing Name = 1280 x 960 @ 60Hz;

Hor Pixels = 1280; // Pixels

Ver Pixels = 960; // Lines

Hor Frequency = 60.000; // kHz = 16.7 usec / line

Ver Frequency = 60.000; // Hz = 16.7 msec / frame

Pixel Clock = 108.000; // MHz = 9.3 nsec ± 0.5%

Character Width = 8; // Pixels = 74.1 nsec

Scan Type = NONINTERLACED; // H Phase = 6.0 %

Hor Sync Polarity = POSITIVE; // HBlank = 28.9% of HTotal

Ver Sync Polarity = POSITIVE; // VBlank = 4.0% of VTotal

Hor Total Time = 16.667; // (usec) = 225 chars = 1800 Pixels

Hor Addr Time = 11.852; // (usec) = 160 chars = 1280 Pixels

Hor Blank Start = 11.852; // (usec) = 160 chars = 1280 Pixels

Hor Blank Time = 4.815; // (usec) = 65 chars = 520 Pixels

Hor Sync Start = 12.741; // (usec) = 172 chars = 1376 Pixels

// H Right Border = 0.000; // (usec) = 0 chars = 0 Pixels

// H Front Porch = 0.889; // (usec) = 12 chars = 96 Pixels

Hor Sync Time = 1.037; // (usec) = 14 chars = 112 Pixels

// H Back Porch = 2.889; // (usec) = 39 chars = 312 Pixels

// H Left Border = 0.000; // (usec) = 0 chars = 0 Pixels

Ver Total Time = 16.667; // (msec) = 1000 lines HT – (1.06xHA)

Ver Addr Time = 16.000; // (msec) = 960 lines = 4.1

Ver Blank Start = 16.000; // (msec) = 960 lines

Ver Blank Time = 0.667; // (msec) = 40 lines

Ver Sync Start = 16.017; // (msec) = 961 lines

// V Bottom Border = 0.000; // (msec) = 0 lines

// V Front Porch = 0.017; // (msec) = 1 lines

Ver Sync Time = 0.050; // (msec) = 3 lines

// V Back Porch = 0.600; // (msec) = 36 lines

// V Top Border = 0.000; // (msec) = 0 lines

Archiving Projects

You can save the elements of a project in a single, compressed Quartus II Archive File (. qar) by clicking

Project > Archive Project.

The .qar captures logic design, project, and settings files required to restore the project.

Use this technique to share projects between designers, or to transfer your project to a new version of the

Quartus II software, or to Altera support. You can optionally add compilation results, Qsys system files, and

third-party EDA tool files to the archive. If you restore the archive in a different version of the Quartus II

software, you must include the original .qdf in the archive to preserve original compilation results.