헐.. bogoMIPS가 라즈베리와는 달리 높게 뜬다.. 패치가 안된건가?
$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 3394.86 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 processor : 1 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 3394.86 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 processor : 2 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 3394.86 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 processor : 3 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 3394.86 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 Hardware : ODROID-U2/U3 Revision : 0000 Serial : 0000000000000000 |
$ cat /proc/meminfo MemTotal: 2071648 kB MemFree: 1395592 kB Buffers: 50280 kB Cached: 440616 kB SwapCached: 0 kB Active: 296348 kB Inactive: 291040 kB Active(anon): 99168 kB Inactive(anon): 10012 kB Active(file): 197180 kB Inactive(file): 281028 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1317888 kB HighFree: 778768 kB LowTotal: 753760 kB LowFree: 616824 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 692 kB Writeback: 964 kB AnonPages: 96688 kB Mapped: 73336 kB Shmem: 12692 kB Slab: 38632 kB SReclaimable: 27320 kB SUnreclaim: 11312 kB KernelStack: 2208 kB PageTables: 3352 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1035824 kB Committed_AS: 1054924 kB VmallocTotal: 245760 kB VmallocUsed: 2868 kB VmallocChunk: 105404 kB |
$ dmesg [ 0.000000] Booting Linux on physical CPU 0xa00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 () [ 0.000000] Kernel was built at commit id 'db41cd1' [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: ODROID-U2/U3 [ 0.000000] cma: CMA: reserved 64 MiB at 43000000 [ 0.000000] cma: CMA: reserved 64 MiB at 51000000 [ 0.000000] cma: CMA: reserved 128 MiB at 67800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] CPU EXYNOS4412 (id 0xe4412220) [ 0.000000] exynos4_init_clocks: initializing clocks [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] s3c_register_clksrc: clock armclk has no registers set [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set [ 0.000000] audiocdclk: no parent clock specified [ 0.000000] exynos4_setup_clocks: registering clocks [ 0.000000] exynos4_setup_clocks: xtal is 24000000 [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000 [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000 [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666 [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000 [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000 [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 193040 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 326898 pages, LIFO batch:31 [ 0.000000] Running under secure firmware. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768 [ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938 [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 2047MB = 2047MB total [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB) [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB) [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB) [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:549 [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.005555] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736) [ 0.050060] pid_max: default: 32768 minimum: 301 [ 0.050337] Mount-cache hash table entries: 512 [ 0.051311] Initializing cgroup subsys cpuacct [ 0.051347] Initializing cgroup subsys memory [ 0.051403] Initializing cgroup subsys devices [ 0.051425] Initializing cgroup subsys freezer [ 0.051442] Initializing cgroup subsys perf_event [ 0.051567] CPU: Testing write buffer coherency: ok [ 0.051899] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00 [ 0.052019] Setting up static identity map for 0x40426850 - 0x404268a8 [ 0.052092] L310 cache controller enabled [ 0.052118] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B [ 0.102265] CPU1: Booted secondary processor [ 0.121952] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01 [ 0.132253] CPU2: Booted secondary processor [ 0.151951] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02 [ 0.162267] CPU3: Booted secondary processor [ 0.181952] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03 [ 0.181988] Brought up 4 CPUs [ 0.182061] SMP: Total of 4 processors activated (7969.17 BogoMIPS). [ 0.182889] devtmpfs: initialized [ 0.188628] regulator-dummy: no parameters [ 0.196016] NET: Registered protocol family 16 [ 0.203668] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.205603] s5p_hdmi_cec_set_platdata() [ 0.207396] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.207419] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.207512] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.207599] EXYNOS4x12 PMU Initialize [ 0.208418] EXYNOS: Initializing architecture [ 0.208813] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0 [ 0.208890] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8 [ 0.212967] bio: create slab <bio-0> at 0 [ 0.213304] hdmi_5v: 5000 mV [ 0.213659] SCSI subsystem initialized [ 0.213824] usbcore: registered new interface driver usbfs [ 0.213878] usbcore: registered new interface driver hub [ 0.213961] usbcore: registered new device driver usb [ 0.214223] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL) [ 0.214333] s3c-i2c s3c2440-i2c.0: slave address 0x10 [ 0.214355] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz [ 0.214747] max77686 0-0009: device found [ 0.216498] LDO1 VDD_ALIVE: 1000 mV [ 0.218069] LDO2 VDDQ_M1_1V8: 1800 mV [ 0.219464] LDO3 VDDQ_AUD_1V8: 1800 mV [ 0.220874] LDO4 VDDQ_MMC2_2V8: 2800 mV [ 0.222281] LDO5 VDDQ_MMC1_1V8: 1800 mV [ 0.223845] LDO6 VDD10_MPLL_1V0: 1000 mV [ 0.225381] LDO7 VDD10_EPLL_1V0: 1000 mV [ 0.226767] LDO8 VDD10_MIPI_1V0: 1000 mV [ 0.228108] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator [ 0.228127] LDO9 VT_CORE_1V0: 1000 mV [ 0.229516] LDO10 VDD18_MIPI_1V8: 1800 mV [ 0.230906] LDO11 VDD18_ABB1_1V8: 1800 mV [ 0.231822] vdd_ldo12 range: 3300 mV [ 0.233206] LDO13 VDD18_MIPIHSI_1V8: 1800 mV [ 0.234609] LDO14 VDD18_ADC_1V8: 1800 mV [ 0.235524] vdd_ldo15 range: 1000 mV [ 0.236915] LDO16 VDD18_HSIC: 1800 mV [ 0.238396] LDO17 VDDQ_CAM_1V8: 1800 mV [ 0.239579] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator [ 0.239598] LDO18 VDDQ_ISP_1V8: 1800 mV [ 0.240154] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator [ 0.240173] LDO19 VT_CAM_1V8: 1800 mV [ 0.241093] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV [ 0.242429] LDO21 TFLASH_2V8: 2800 mV [ 0.243920] vddf_emmc_2V85: 2850 mV [ 0.245250] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator [ 0.245268] LDO23 VDD_TOUCH_2V8: 2800 mV [ 0.246614] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator [ 0.246633] LDO24 VDD_TOUCHLED_3V3: 3300 mV [ 0.248140] LDO25 VDDQ_LCD_3V0: 1800 mV [ 0.249317] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator [ 0.249336] LDO26 VDD_MOTOR_3V0: 3000 mV [ 0.249889] BUCK1 vdd_mif: 1100 mV [ 0.250651] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV [ 0.251219] BUCK3 vdd_int: 1125 mV [ 0.251981] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV [ 0.253381] BUCK5 VDDQ_CKEM1_2: 1200 mV [ 0.254769] BUCK6 1V35: 1350 mV [ 0.256165] BUCK7 2V0: 2000 mV [ 0.256722] ODROIDU2: Regulator BUCK8 [ 0.377740] BUCK8 3V0: 3300 mV [ 0.378922] BUCK9 1V2: ODROIDU2: Disabled regulator [ 0.378940] BUCK9 1V2: 1200 mV [ 0.379345] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [ 0.379410] s3c-i2c s3c2440-i2c.1: slave address 0x10 [ 0.379432] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz [ 0.379586] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter [ 0.379648] s3c-i2c s3c2440-i2c.3: slave address 0x10 [ 0.379669] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz [ 0.379768] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter [ 0.379825] s3c-i2c s3c2440-i2c.7: slave address 0x10 [ 0.379844] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz [ 0.379937] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter [ 0.380000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10 [ 0.380022] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz [ 0.380175] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter [ 0.380230] media: Linux media interface: v0.10 [ 0.380275] Linux video capture interface: v2.00 [ 0.380507] Advanced Linux Sound Architecture Driver Initialized. [ 0.381110] Switching to clocksource mct-frc [ 0.387886] NET: Registered protocol family 2 [ 0.388347] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.388479] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.388620] TCP: Hash tables configured (established 8192 bind 8192) [ 0.388682] TCP: reno registered [ 0.388704] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.388746] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.388988] NET: Registered protocol family 1 [ 0.389163] Trying to unpack rootfs image as initramfs... [ 0.493371] Freeing initrd memory: 2076K [ 0.493579] CPU PMU: probing PMU on CPU 0 [ 0.493605] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.494810] bounce pool size: 64 pages [ 0.500669] msgmni has been set to 1471 [ 0.501710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.501734] io scheduler noop registered [ 0.501748] io scheduler deadline registered [ 0.501896] io scheduler cfq registered (default) [ 0.508984] SoftPWM v0.2-acme initializing. [ 0.508998] Clock resolution is 1ns [ 0.509031] SoftPWM initialized. [ 0.511583] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056 [ 0.511608] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.513821] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056 [ 0.513844] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.514630] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056 [ 0.514652] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.555151] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10 [ 0.555392] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10 [ 1.573551] console [ttySAC1] enabled [ 1.577406] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10 [ 1.585127] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10 [ 1.592957] [drm] Initialized drm 1.1.0 20060810 [ 1.597568] i2c i2c-2: attached s5p_ddc into i2c adapter successfully [ 1.603714] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully [ 1.610697] exynos-mixer s5p-mixer: probe start [ 1.615307] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed [ 1.622387] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.628373] [drm] No driver support for vblank timestamp query. [ 1.685880] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 583 ns [ 1.686500] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 611000 ns [ 1.686515] exynos-mixer s5p-mixer: start latency exceeded, new value 458 ns [ 1.686553] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31875 ns [ 1.768434] Console: switching to colour frame buffer device 240x67 [ 1.818335] exynos-drm exynos-drm: fb0: frame buffer device [ 1.823963] exynos-drm exynos-drm: registered panic notifier [ 1.829606] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.835491] mali-utgard mali-utgard.0: start latency exceeded, new value 458 ns [ 1.842729] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3583 ns [ 1.852175] Mali: init_mali_clock mali_clock c0605c68 [ 1.857990] mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns [ 1.863115] mali-utgard mali-utgard.0: state save latency exceeded, new value 2209 ns [ 1.871151] pd-g3d: Power-off latency exceeded, new value 233500 ns [ 1.877180] Mali: Mali device driver loaded [ 1.886647] brd: module loaded [ 1.889628] loop: module loaded [ 1.889831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.894167] s5p-ehci s5p-ehci: S5P EHCI Host Controller [ 1.899170] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 [ 1.906619] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000 [ 1.921176] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00 [ 1.921379] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.927815] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.935017] usb usb1: Product: S5P EHCI Host Controller [ 1.940189] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd [ 1.945832] usb usb1: SerialNumber: s5p-ehci [ 1.950435] hub 1-0:1.0: USB hub found [ 1.953797] hub 1-0:1.0: 3 ports detected [ 1.958075] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.964043] exynos-ohci exynos-ohci: Already power on PHY [ 1.969337] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller [ 1.975341] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2 [ 1.987557] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000 [ 2.050236] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.056232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.063410] usb usb2: Product: EXYNOS OHCI Host Controller [ 2.068843] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd [ 2.074481] usb usb2: SerialNumber: exynos-ohci [ 2.079605] hub 2-0:1.0: USB hub found [ 2.084353] hub 2-0:1.0: 3 ports detected [ 2.089345] Initializing USB Mass Storage driver... [ 2.094117] usbcore: registered new interface driver usb-storage [ 2.099196] USB Mass Storage support registered. [ 2.221416] usb3503 0-0008: USB3503_SP_ILOCK = 0x32 [ 2.266185] usb 1-2: new high-speed USB device number 2 using s5p-ehci [ 2.331179] usb3503 0-0008: switched to HUB mode [ 2.335766] usb3503 0-0008: usb3503_probe: probed on hub mode [ 2.361169] Skip request 2, current 0 [ 2.361304] s3c-hsotg s3c-hsotg: regs f0080000, irq 103 [ 2.366455] s3c-hsotg s3c-hsotg: Already power on PHY [ 2.370980] s3c-hsotg s3c-hsotg: EPs:15 [ 2.375418] s3c-hsotg s3c-hsotg: dedicated fifos [ 2.380144] max77686-rtc max77686-rtc: max77686_rtc_probe [ 2.401509] usb 1-2: New USB device found, idVendor=0424, idProduct=9730 [ 2.406906] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.486800] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0 [ 2.495223] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000 [ 2.499998] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 584 ns [ 2.507087] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16875 ns [ 2.515055] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 458 ns [ 2.522040] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3125 ns [ 2.526238] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000 [ 2.535594] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns [ 2.542641] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 416 ns [ 2.549726] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15084 ns [ 2.557707] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 500 ns [ 2.564681] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 459 ns [ 2.566255] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000 [ 2.577774] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2541 ns [ 2.585440] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns [ 2.592523] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15000 ns [ 2.600511] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 459 ns [ 2.607489] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2500 ns [ 2.611234] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000 [ 2.621065] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 375 ns [ 2.628172] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 14875 ns [ 2.636144] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 417 ns [ 2.643172] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 416 ns [ 2.646507] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10 [ 2.646622] s5p-fimc-md: Registered fimc.0.capture as /dev/video11 [ 2.646728] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12 [ 2.646833] s5p-fimc-md: Registered fimc.1.capture as /dev/video13 [ 2.646943] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14 [ 2.647047] s5p-fimc-md: Registered fimc.2.capture as /dev/video15 [ 2.647158] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16 [ 2.647262] s5p-fimc-md: Registered fimc.3.capture as /dev/video17 [ 2.647901] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20 [ 2.648012] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21 [ 2.648015] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec [ 2.648111] sclk_mfc rate is: 220 [ 2.648271] s5p-mfc s5p-mfc: decoder registered as /dev/video8 [ 2.648379] s5p-mfc s5p-mfc: encoder registered as /dev/video9 [ 2.648765] Exynos: Kernel Thermal management registered [ 2.648960] cpuidle: using governor ladder [ 2.648986] sdhci: Secure Digital Host Controller Interface driver [ 2.648988] sdhci: Copyright(c) Pierre Ossman [ 2.649071] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz) [ 2.649134] mmc0: no vqmmc regulator found [ 2.649141] mmc0: no vmmc regulator found [ 2.767202] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3375 ns [ 2.771208] usb 1-3: new high-speed USB device number 3 using s5p-ehci [ 2.781475] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 583 ns [ 2.786177] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA [ 2.796247] pd-cam: Power-off latency exceeded, new value 246917 ns [ 2.797272] dw_mmc dw_mmc: Using internal DMA controller. [ 2.828928] mmc0: new high speed SDHC card at address 0007 [ 2.833384] mmcblk0: mmc0:0007 SL16G 14.4 GiB [ 2.837571] dw_mmc dw_mmc: Version ID is 240a [ 2.838667] mmcblk0: p1 p2 [ 2.839146] DWMMC: Div 2 = 130 [ 2.839155] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130) [ 2.857913] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo [ 2.866747] ledtrig-cpu: registered to indicate activity on CPUs [ 2.872731] usbcore: registered new interface driver usbhid [ 2.878107] usbhid: USB HID core driver [ 2.882441] cec: Probe start [ 2.886673] s5p_cec_probe: pdata=e6cab940 [ 2.890886] s5p_cec_mem_probe(): mapped cec_base to f00a2000, size 0x1000 [ 2.896177] DWMMC: Div 1 = 174 [ 2.896186] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 300000Hz, actual 298850HZ div = 174) [ 2.909101] cec: Requesting irq 146 for s5p-cec [ 2.913519] cec: probe successful [ 2.931512] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.936904] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.944024] DWMMC: Div 1 = 255 [ 2.944275] max98090 1-0010: MAX98090 REVID=0x43 [ 2.944501] hub 1-3:1.0: USB hub found [ 2.944634] hub 1-3:1.0: 3 ports detected [ 2.961293] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 203922Hz, actual 203921HZ div = 255) [ 2.972387] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok [ 2.981634] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok [ 2.989296] TCP: cubic registered [ 2.993687] NET: Registered protocol family 17 [ 2.998094] NET: Registered protocol family 15 [ 3.002444] NET: Registered protocol family 35 [ 3.006966] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 3.013290] ThumbEE CPU extension supported. [ 3.017655] pd-gps: Power-off latency exceeded, new value 4395083 ns [ 3.023908] pd-lcd0: Power-off latency exceeded, new value 625 ns [ 3.029969] pd-lcd1: Power-off latency exceeded, new value 6078958 ns [ 3.036339] Registering SWP/SWPB emulation handler [ 3.041383] pd-mfc: Power-off latency exceeded, new value 188250 ns [ 3.041472] registered taskstats version 1 [ 3.066697] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:06 UTC (946688406) [ 3.076229] exynos4_dvfs_hotplug_init, max(2000000),min(0) [ 3.079016] ALSA device list: [ 3.081733] #0: Built-in Audio [ 3.085341] Freeing init memory: 176K [ 3.091192] DWMMC: Div 2 = 130 [ 3.094224] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130) [ 3.129744] systemd-udevd[90]: starting version 204 [ 3.141190] DWMMC: Div 1 = 174 [ 3.144013] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 300000Hz, actual 298850HZ div = 174) [ 3.196194] DWMMC: Div 1 = 255 [ 3.199156] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 203922Hz, actual 203921HZ div = 255) [ 3.405162] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.409788] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 11.014781] EXT4-fs (mmcblk0p2): recovery complete [ 11.043339] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 11.698997] init: plymouth-upstart-bridge main process (148) terminated with status 1 [ 11.704472] init: plymouth-upstart-bridge main process ended, respawning [ 11.718918] init: plymouth-upstart-bridge main process (159) terminated with status 1 [ 11.724993] init: plymouth-upstart-bridge main process ended, respawning [ 12.721405] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 13.416649] systemd-udevd[303]: starting version 204 [ 13.689774] fuse init (API version 7.20) [ 13.974602] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0 [ 14.054277] pd-cam: Power-on latency exceeded, new value 368208 ns [ 14.054294] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 667 ns [ 14.054322] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 18125 ns [ 14.054353] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2667 ns [ 14.061219] pd-cam: Power-on latency exceeded, new value 1189666 ns [ 14.061239] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 666 ns [ 14.061268] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 18459 ns [ 14.061294] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 500 ns [ 14.061313] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2833 ns [ 14.061640] pd-cam: Power-off latency exceeded, new value 316125 ns [ 14.063463] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 39042 ns [ 14.069127] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 500 ns [ 14.069160] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 18917 ns [ 14.070832] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 1000 ns [ 14.070851] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 583 ns [ 14.070862] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 5000 ns [ 14.071608] pd-cam: Power-off latency exceeded, new value 730667 ns [ 14.086438] pd-mfc: Power-on latency exceeded, new value 499667 ns [ 14.086459] s5p-mfc s5p-mfc: start latency exceeded, new value 542 ns [ 14.086472] s5p-mfc s5p-mfc: state restore latency exceeded, new value 2791 ns [ 14.192426] s5p-mfc s5p-mfc: stop latency exceeded, new value 750 ns [ 14.192439] s5p-mfc s5p-mfc: state save latency exceeded, new value 1666 ns [ 14.192710] pd-mfc: Power-off latency exceeded, new value 263875 ns [ 14.715333] smsc95xx v1.0.4 [ 14.721834] [smsc95xx_read_mac_addr] Mac address = C2:22:09:F2:5F:E8 [ 14.770814] smsc95xx 1-2:1.0 eth0: register 'smsc95xx' at usb-s5p-ehci-2, smsc95xx USB 2.0 Ethernet, c2:22:09:f2:5f:e8 [ 14.770896] usbcore: registered new interface driver smsc95xx [ 15.040668] Bluetooth: Core ver 2.16 [ 15.040722] NET: Registered protocol family 31 [ 15.040728] Bluetooth: HCI device and connection manager initialized [ 15.040751] Bluetooth: HCI socket layer initialized [ 15.040762] Bluetooth: L2CAP socket layer initialized [ 15.040786] Bluetooth: SCO socket layer initialized [ 15.050034] Bluetooth: RFCOMM TTY layer initialized [ 15.050079] Bluetooth: RFCOMM socket layer initialized [ 15.050085] Bluetooth: RFCOMM ver 1.11 [ 15.062725] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.062733] Bluetooth: BNEP filters: protocol multicast [ 15.062754] Bluetooth: BNEP socket layer initialized [ 15.489883] NET: Registered protocol family 10 [ 16.542089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.552836] init: plymouth-stop pre-start process (925) terminated with status 1 [ 28.170979] max98090 1-0010: No audio clocks configured [ 42.223777] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.224881] smsc95xx 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 |
'embeded > odroid' 카테고리의 다른 글
| odroid emmc sd 동시 사용하기 (0) | 2016.09.05 |
|---|---|
| odroid Win32DiskImager 별 속도 테스트 (0) | 2016.09.04 |
| odroid ready! (0) | 2016.09.03 |
| 오드로이드 이미지 마운트 (0) | 2016.09.02 |
| odroid u3 사용준비! (0) | 2016.09.02 |
