개소리 왈왈/컴퓨터2012. 3. 11. 16:53
BIOS 상에는 아래와 같은 메뉴인데 설명이 부실해서 머하는건지 알수가 없다 -_-

[링크 : http://mediapool.getthespec.com/media.pdf?m=XQduX1%2BlZMMuUEdpt0BBWA%3D%3D&v=PD]

GFX Multi Function Mode(GFX 다중 기능 모드) 내부 그래픽 다중 기능 모드를 활성화/비활성화 합니다.
SurroundView PCI 그래픽 애드온 카드가 ATI인 경우에만 SurroundView 기능을 활성화/비활성화합니다. 

[링크 : http://h20565.www2.hp.com/...CacheTok=com.vignette.cachetoken]


SurroundView

The SurroundView technology is a multi-display technology available in the 690G chipset, and the AMD 780G IGP chipset. This technology supports the connection of multiple monitors. For the AMD 780G chipset, at most two monitors (four supported along with a discrete graphics card) can be connected onto the supported video output ports (one through LVDS, that is either HDMI or DVI-D port and one D-Sub port), in "extended desktop mode" or "duplicate mode", for better desktop utilization and to provide more flexibility. The integrated graphics processor and the discrete graphics processor work in parallel to drive multiple displays. Therefore it is different from Hybrid CrossFireX.


[링크 :  http://en.wikipedia.org/wiki/ATI_Hybrid_Graphics#SurroundView]  


Check you BIOS to make sure GFX Multi Function Mode is set to Enabled and that the PCI-E bandwidth settings are correct (GFX0 --> x16, GFX1 --> x1). This should tell your motherboard you are using two graphic cards not in a crossfire setup. 


[링크 : http://www.tomshardware.com/forum/254316-33-monitors-graphics-cards-make-work-together]


찾아도 이정도 밖에 안나오는데 흐음..
서라운드 뷰는, 내장 그래픽이나 혹은 외장 그래픽의 DAC을 빌려와서 출력을 확장하는 기능이고
멀티펑션은 crossfire를 사용하지 않고 독립적으로 사용한다 라는 걸로 보면 되려나? 


---
특이하게도, 그래픽 카드를 두개를 인식을 한다.
그런데 저.. Secondary는 먼지 좀 모르겠다(DVI / D-SUB 이렇게 두개를 독립적으로 하나?)


 

드라이버가 하나 설치가 덜되서 그런지 모니터 갯수는 4개로 인식하는 듯하다
(메인보드 내장 DVI / D-SUB + X550용 DVI / D-SUB)

'개소리 왈왈 > 컴퓨터' 카테고리의 다른 글

...  (2) 2012.03.14
ATI HD2100 과 X550 성능비교(?)  (1) 2012.03.11
한대 확 질러버려?  (2) 2012.03.11
아 몰라 그냥 하나 사고 말지 -_-  (0) 2012.03.10
그래도 꼴에 SSD는 SSD라고~  (0) 2012.03.09
Posted by 구차니