ATI RageXL 문제도 아니었고(vga=771 nomodeset 둘다 해결안됨)
quiet 옵션을 빼고 부팅을 해보니


..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 
요기 까지만 출력하고 멈추어 버린다.

검색을 해보니 믿기지는 않지만 키보드를 바꾸니 해결되었다는 충격적인 내용에
혹시나 해서 USB 허브에서 뽑아 따로따로 키보드와 마우스를 연결해주니 문제없이 설치된다.. OTL
Yes, it is strange but true (?).
I think what might happen that a contact got stuck and send an impuls that linux was interpreting as something wrong and collapsed.
I unplugged the usb transmitter for my keyboard and mouse and it all booted up well. The keyboard is fine so far and it was a free keyboard from logitech. Something might gotten inside. The battery is fine btw.
Will try to clean it. So if someone has a simliar problem, check you keyboard.

[링크 : http://forums.opensuse.org/english/get-technical-help-here/hardware/460402-boot-panic-2.html

다른걸 추가적으로 찾아보니 APIC 문제이며, noapic를 주고 설치를 하면된다는데 귀찮아서 테스트는 일단 패스 -_-
Your APIC is borked. You'll need to use the noapic option. See here for a forum posting regarding this. Don't fret, it doesn't mean that the hardware is bad, just that the BIOS didn't configure it in a state that was suitable for booting a kernel. You should also look around for a BIOS update and see if that helps.


---
2011.09.18 추가
USB 허브에 마우스/키보드를 연결해서 사용하면 노말 부팅도 안된다 -_-
설치화면에서 noapic nolapic를 주어도 여전히 부팅은 막막하고...
그냥 USB 허브없이 바로 USB 키보드/마우스를 꼽아야 되는듯 하다.

BIOS에서 USB emulation 기능을 활성화 해보아도 안되는 상황 ㅠ.ㅠ
(설명에 68h/60h 어쩌구 하면서 PS/2 에뮬레이션 같은데 이걸 해도 안되네 -_-)
Port 64/60 Emulation - This option is typically not used since most OSes are  now USB-aware.
[링크 : http://www.etomic.org/manuals/motherboard_se7210tp1.pdf
[링크 : http://www.techarp.com/showfreebog.aspx?lang=0&bogno=343] << 내용 
---

APIC는 인터럽트 관련인데 음..
USB 허브를 통해서 키보드와 마우스를 인식하다 보니 무언가가 엉겨서 그런걸려나?
[링크 : http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller

LAPIC는 Local APIC의 약자이다.
[링크 : http://linux.about.com/cs/linux101/g/lapic.htm
Posted by 구차니