embeded/raspberry pi2017. 11. 8. 08:24

piwall은 2015년 부터 보아오던건데

소스까진 공개되도 구성이 어떻게 된다 라는 그런게 잘 안보여서 찾다보니..


결론은.. rpi + hdmi 모니터 + ethernet

마스터 장치 혹은 라즈베리에서 ffmpeg을 통해서 동영상 스트리밍 해주고

슬레이브(tile) 들은 그걸 받아서 단순하게 omxplayer를 통해 재생해주는 식으로 보인다.

Installing the software

If the master is not a Raspberry Pi then just install ffmpeg or avconv on your machine. 

[링크 : http://www.piwall.co.uk/information/installation]

    [링크 : http://www.piwall.co.uk/information/6-features-and-benefits]


그런 이유로 piwall은 동영상을 틀 수 밖에 없고

네트워크로 보여줄 부분만 crop 하는 식으로 보내서 자유롭게 설정이 가능하지만

(토막낸 여러개를 비정형적으로 라던가)

동영상이 아니면 불가능하고, 하나의 동영상만 재생이 가능하는 식의 제한이 있는 것으로 보인다

(그런데 핵융합로 같은건 하나가 아닌거 같았는데..)


그걸 뛰어넘기 위해 다른 회사가 먼가를 하는데

대충 내용만 보여서.. HDMI over Ethernet 기술을 통해 어쩌구 하는데

HDbitT 라는 프로토콜을 통해 랜으로 HDMI 데이터를 쏘고

[링크 : http://www.hdbitt.org/what-is-hdbitt.html]


받는 쪽은 어떻게 한다는건진 좀 이해를 못함..

What you need

Firstly, you need to get a few things in order for your video wall to work and to avoid messing up your network. Here is the list of required hardware:

  • A Yodeck player for each screen of the video wall
  • Another Yodeck player (as “Master”) that will play back the actual content
  • An HDMI-to-IP video streamer – we recommend Lenkeng LKV373A (sender only, costs about $36)
  • A Network router – no special specs, just having a LAN and a WAN port will do
  • One Network switch to connect all of the above 

구성으로 봐서는.. HDMI to IP video streamer 라고 하니

rpi의 HDMI 출력을 HDMI to IP video streamer로 넣고

slave yodeck player들은 HDbitT 프로토콜이 broadcast로 전송되니

그걸 받아서 재생해야 할 위치들만 자르고 키워서 보여준다 라는 개념인가?


[링크 : https://www.yodeck.com/news/video-wall-support/]

[링크 : https://www.yodeck.com/news/video-wall-using-raspberry-pi/]

    [링크 : http://www.lenkeng.net/Index/detail/id/149]

'embeded > raspberry pi' 카테고리의 다른 글

블투 동글이 비싸!  (0) 2018.02.17
라즈베리 2 시리얼이 안되네...?  (0) 2018.01.11
rpi dual spi lcd  (0) 2017.11.08
GY-80 / GY-801  (0) 2017.10.09
gyro를 조합하여 정밀하게 사용하기  (0) 2017.09.22
Posted by 구차니